Should New Car Tires Be Installed on the Front or Rear?

1 Answers
VonRobert
07/24/25 1:35am
Here is the relevant introduction about whether new car tires should be installed on the front or rear: 1. First, it depends on the vehicle's drive characteristics: front-wheel-drive cars should replace the front tires, while rear-wheel-drive cars should replace the rear tires. Front-wheel-drive cars require higher grip from the front tires. If the front tires lack sufficient grip, accidents are more likely to occur, so new tires should be installed on the front wheels for front-wheel-drive cars. For rear-wheel-drive cars, the rear tires are prone to skidding or even rolling over on slippery roads or during sharp turns, leading to accidents. Therefore, new tires should be installed on the rear wheels. 2. Second, it depends on the driving environment: If you frequently drive in urban areas with good road conditions and low speeds, the likelihood of fishtailing is minimal. Instead, the probability of steering loss due to front tire blowouts or skidding is higher. Conversely, if you frequently drive on highways, the chance of fishtailing caused by newer front tires will likely exceed the risk of a blowout. If you often drive in the city, new tires should be placed on the front wheels, whereas if you frequently drive on highways, new tires should be installed on the rear wheels.
Was this review help?
17
1
Share
More Forum Discussions

Is the Highlander better in 2WD or 4WD?

The differences between the Highlander 2WD and 4WD are: 1. Drive system: 4WD means all four wheels have power, while 2WD only has two wheels with power; 2. Price: 4WD is more expensive than 2WD; 3. Displacement: 2WD has a 2.7L engine, while 4WD has a 3.5L engine; 4. Road stability: The 4WD Highlander performs better on rough roads compared to the 2WD version; 5. Fuel consumption: The new Highlander 2.0T's on-demand 4WD consumes slightly more fuel than the 2WD version, but the difference in fuel consumption per 100 kilometers does not exceed 1 liter.
4
3
Share

What is the tire pressure for Jetta VS5?

The normal tire pressure range for the Jetta VS5 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure monitoring system of the Jetta VS5 can be viewed on the central control screen. The vehicle comes equipped with a tire pressure monitoring system that provides automatic alarm alerts without manual operation. This tire pressure monitoring system uses ABS wheel speed sensors to compare the rotational speed differences between tires to determine if there is abnormal tire pressure, issuing immediate alerts if any abnormalities are detected. The module is integrated into the ABS pump. Generally, tire pressure above 2.8 bar is considered too high, and tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Typically, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage issues, the only solution is to replace the sensor with a new one.
20
3
Share

How to Close the Corolla Hood?

When closing the hood, first lower the front hood support rod while supporting the hood with your other hand. Slowly move it downward until the hood is about 30 centimeters from closing, then release it to allow it to fall freely. A "clunk" sound indicates that it is locked. If the hood is not allowed to fall freely, it may not close properly. Below are the functions of the hood: 1. Airflow diversion. For objects moving at high speed in the air, the air resistance and turbulence generated around the object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the car. Through diversion, air resistance can be decomposed into beneficial forces, increasing the force of the front tires on the ground, which enhances driving stability. 2. Protecting the engine and surrounding pipeline components. Under the hood are critical components of the car, including the engine, electrical circuits, fuel system, braking system, and transmission system, all of which are vital to the vehicle. By improving the strength and structure of the hood, it can effectively prevent adverse effects such as impact, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. Aesthetics. The exterior design of a vehicle is a direct reflection of its value. As an important part of the overall appearance, the hood plays a crucial role in enhancing visual appeal and embodying the concept of the car as a whole.
14
3
Share

Why won't my Chevrolet Cruze start?

Reasons why a Chevrolet Cruze won't start: 1. Check if the battery has power: It may be due to power loss from leaving headlights on for extended periods or battery lifespan expiration. Generally, it's recommended to replace the battery every 2 years. Additionally, installing HID headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. 2. Check fuel level: If the fuel gauge shows below the red line, the car won't start. Also pay attention to fuel quality - always refuel at reputable gas stations. When traveling, you can use a gauze wrap over the fuel nozzle to filter impurities. 3. Lack of antifreeze: Using water or low-quality antifreeze may cause the entire cooling system to freeze in winter, potentially cracking the engine block and preventing the water pump from functioning, making the car unable to start while damaging other engine components. 4. Wrong gear position: When starting a Chevrolet Cruze, the gear must be in P (Park) or N (Neutral) position. If left in R (Reverse) or D (Drive), the car won't start.
4
3
Share

Which engine is used in the Haval H6?

The Haval H6 is equipped with the Great Wall's independently developed 1.5GDIT direct-injection engine. The core advantages of the 1.5GDIT direct-injection engine are as follows: 1. It adopts advanced technical configurations, including a silent chain system, dual VVT (intake and exhaust), 20MPa top-mounted central injector, electronically controlled turbocharger, CVVL, cylinder head-integrated exhaust manifold, and variable displacement oil pump. 2. It features an efficient combustion system, utilizing CFD simulation analysis of the intake tract and transient CFD analysis of in-cylinder flow. The optimal solution is selected through optical engine testing. 3. For NVH control, it implements 12 active noise control measures and 4 passive noise control technologies, including suspended injectors, EVO high-pressure fuel pump, high-stiffness component design, idle small-lift strategy, and small-pitch silent chain system. 4. The engine cylinder head is designed with an integrated exhaust manifold, reducing the number of components compared to previous designs. The lightweight structure is also more compact. The variable displacement oil pump meets the lubrication needs of friction pairs while reducing oil pump drive power, lowering fuel consumption by 3%. 5. The top-mounted central injector design improves fuel economy. It provides better atomization, effectively reduces combustion chamber temperature, and prevents excessive wetting of the cylinder wall by fuel-air mixture, thereby enhancing combustion efficiency, increasing power, and reducing fuel consumption.
1
4
Share

How often should the transmission fluid be changed for the Magotan?

For the Volkswagen Magotan, the transmission fluid should be changed every 60,000 kilometers, with a replacement capacity of 6L for the 2.0T model. Methods for changing the transmission fluid of the Volkswagen Magotan: 1. Gravity Drain: Loosen the bolts of the oil pan to allow the transmission fluid to drain out by gravity. Advantages: The simplest method. Disadvantages: Not all the transmission fluid can be drained. 2. Machine Flush: First, add new transmission fluid into the flushing machine, then connect the machine to the transmission's fluid lines. The new transmission fluid will push out the old fluid under pressure. 3. Oil Pan Removal: Directly clean from the source for a more thorough job, and the transmission fluid filter can also be cleaned during the process.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.