Should Naturally Aspirated Engines Use 92 or 95 Octane Gasoline?

1 Answers
CarolineDella
07/29/25 10:22pm
Whether a naturally aspirated engine should use 92 or 95 octane gasoline depends on the type of engine and its compression ratio. If the engine has a higher compression ratio, higher-octane gasoline should be used. Conversely, if the compression ratio is lower, lower-octane gasoline is suitable. For example, household cars equipped with naturally aspirated engines are generally recommended to use 92-octane gasoline, as they typically feature small-displacement naturally aspirated engines with relatively low compression ratios, making 92-octane sufficient for their operational needs. Naturally aspirated engines rely on atmospheric pressure to draw air into the combustion chamber without the use of any forced induction devices like turbochargers or superchargers.
Was this review help?
2
0
Share
More Forum Discussions

What Causes Abnormal Noise When a Car Fails to Start?

There are several reasons why a car may fail to start with abnormal noise: Low battery voltage: This can cause no response during startup, preventing the starter from working. You can determine this by observing whether the instrument cluster lights dim significantly when turning the ignition switch. If confirmed to be due to a dead battery, you can jump-start the vehicle or replace the battery to start the car. Damaged fuel pump: This prevents fuel in the tank from being supplied for combustion. To diagnose, turn on the ignition switch and listen inside the car for the sound of the fuel pump operating. If there's no sound, the fuel pump needs replacement. If the fuel pump isn't completely damaged, you can try tapping the bottom of the fuel tank with a hard metal rod or similar object, which might sometimes allow the car to start. Besides a damaged fuel pump, the issue could also be caused by a faulty fuel pump control unit or relay.
6
5
Share

What happens if a tire blows out at 100 km/h on the highway?

A tire blowout at 100 km/h on the highway can cause the vehicle to roll over. Here are some precautions for driving on highways: 1. Overtaking caution: Be extremely careful when overtaking on highways. Always use your turn signal before overtaking and pass from the overtaking lane, avoiding the bad habit of overtaking from the right. After signaling, do not overtake immediately; check the road conditions behind you. When it is safe to overtake, accelerate and maintain a lateral distance of 1.5 meters from the vehicle in front. After overtaking, ensure sufficient distance before merging back into the driving lane to prevent rear-end collisions. 2. Maintain longitudinal distance: Generally, on dry roads with good braking conditions, the distance between vehicles (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, maintain at least 80 meters, and at 100 km/h, maintain at least 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the distance between vehicles should be more than doubled.
18
0
Share

Does Spilling a Bottle of Water in the Passenger Seat Have Any Impact?

Spilling a bottle of water in the passenger seat can have an impact. If there are waterproof floor mats, it helps, but the water should be removed as soon as possible. The car contains many electronic devices and circuit systems. If the water is not promptly removed, these electronic components and wiring can get wet, leading to rust and potential short circuits. Hazards of water exposure in a vehicle: 1. Corrosion of the chassis: If the water level is not too deep and only reaches the chassis, it can corrode the bolts used to secure external attachments at the bottom of the vehicle cabin, weakening their tensile strength and potentially causing detachment. 2. Compromised body sealing: Sealing strips and damping rubber rings can be affected by sand and mud, leading to oxidation, hardening, and increased wear. While this may not be noticeable when stationary, it can cause unusual noises or wind noise while driving. 3. Odor and mold growth: Water that enters the vehicle interior turns into an acidic mixture, which can be absorbed by the fabric inside. When heated, this can lead to mold growth and unpleasant odors. If not cleaned properly, it can also corrode nearby metal components, reducing their hardness and strength.
5
3
Share

Is the Ford Raptor subject to mandatory scrapping after 15 years?

The Ford Raptor is subject to mandatory scrapping after 15 years. The Ford Raptor is a classic pickup truck model under Ford Motor Company, and in China, it is classified as a truck. Therefore, the Ford Raptor falls under the scrapping policy for trucks, which mandates scrapping after 15 years of use. Mandatory scrapping is different from recommended scrapping. Recommended scrapping suggests scrapping, but if the vehicle still meets the requirements for continued use, it may not be scrapped. However, mandatory scrapping means the vehicle must, without exception, be scrapped. There are four criteria for mandatory scrapping: Reaching the stipulated service life; After repair and adjustment, still failing to meet the national standards for motor vehicle safety technology concerning in-use vehicles; After repair and adjustment or the adoption of control technology, still failing to meet the national standards concerning pollutant emissions or noise for in-use vehicles; Failing to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period.
11
0
Share

What are the disadvantages of aftermarket three-way catalytic converters?

Aftermarket three-way catalytic converters may not perform as effectively as the original ones, leading to non-compliant exhaust emissions. Unlike original equipment manufacturer (OEM) catalytic converters produced by car manufacturers, aftermarket versions may lack relevant certification or quality assurance. The quality of aftermarket three-way catalytic converters varies widely, and they may have a shorter lifespan. Below is additional information: 1. Three-way catalytic converter: A three-way catalytic converter is the most important external purification device installed in a vehicle's exhaust system. It converts harmful gases such as carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NOx) emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Because this catalytic converter can simultaneously transform the three major harmful substances in exhaust gases into harmless substances, it is called a three-way catalytic converter. 2. Working principle: When high-temperature vehicle exhaust passes through the purification device, the purifying agent in the three-way catalytic converter enhances the activity of CO, HC, and NOx gases, promoting specific oxidation-reduction chemical reactions. CO oxidizes at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds oxidize at high temperatures into water (H2O) and carbon dioxide; and NOx is reduced into nitrogen and oxygen. The three harmful gases are transformed into harmless gases, thereby purifying the vehicle exhaust.
15
1
Share

Does Essential Balm Damage Car Paint?

Essential balm can dissolve paint. If properly applied, it can remove stains when dripped on a car. However, excessive use of essential balm or applying too much force can damage the car paint. Therefore, it is advisable to use essential balm with caution. Principle of essential balm for stain removal: It contains methyl salicylate, which can dissolve some artificial organic adhesives and also has a certain dissolving effect on some stains. Thus, essential balm can achieve good stain removal results. Essential balm is harmful to car interiors. Plastic parts inside the car, especially painted sections of the interior, can be dissolved by essential balm. Using essential balm for stain removal not only yields poor results but can also make the stains worse and potentially corrode the interior. Therefore, for interior parts, it is more practical and effective to use common stain removers. Although essential balm is not flammable, it has a noticeable combustion-promoting effect. If a car catches fire, essential balm can make the fire burn more fiercely, making it harder to extinguish. Hence, essential balm should not be kept inside the car. Items like car perfumes and lighters are also flammable, especially during summer when external temperatures are high, leading to even higher temperatures inside the car, which significantly increases the risk of explosion and fire.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.