Should ix35 use 5w30 or 5w40?

Can I pick up the ordered car later?

You can pick up the ordered car later. Here are some relevant considerations when ordering a car: 1. Model and Price: Before placing an order, you can research the model online, including basic configuration differences and price discounts. After gaining a preliminary understanding of the model and discount range, you can negotiate with sales consultants at 4S stores. It is recommended to compare offers from multiple dealers. 2. Vehicle Information: Before ordering, confirm the model, chassis number, engine number, and color of the car you intend to purchase. Especially ensure that both the car code and identification number are clearly stated to avoid any issues when picking up the car. 3. Order Contract: Before signing the contract, finalize the price and any included gifts. Pay attention to the type of order when drafting the contract. Additionally, clearly specify the costs for insurance and purchase tax, as well as the deposit and pickup time. Clearly define liability for breaches to prevent future disputes. Regarding the deposit, try to pay as little as possible. After drafting the contract, carefully review it to avoid any omissions. Finally, sign the contract and provide your contact information to complete the order process.

14

3

Share

Will 4S stores sell flooded cars as new cars?

4S stores generally do not sell flooded cars as new cars. Key points for restoring flooded vehicles are as follows: 1. External cleaning: After the vehicle is towed away from the flooded area, the exterior should be cleaned first, such as the inner side of the front and rear bumpers, the left and right rearview mirrors and their internal motors, and removable rearview mirror lenses should be disassembled and cleaned. 2. Internal cleaning: After initial cleaning, remove and clean the seats, electrical components (computers, audio systems, relays, dashboards), door panels, headliners, interior panels, light assemblies, door waterproof liners, sunroof assemblies, etc. 3. Engine compartment cleaning: Remove and clean the engine hood insulation panel, disconnect the battery, remove the timing belt cover to clean the inside to prevent poor crankshaft position sensor response, clean the generator interior with high-pressure water, clean the radiator and cooling fins to prevent overheating and poor cooling, and ensure every electrical connector is thoroughly cleaned.

11

5

Share

What Do the Two Numbers in Tire Pressure Display Represent?

The two numbers in the tire pressure display represent the minimum and maximum values of the tire pressure. This is because tire pressure is not fixed; it can fluctuate as the wheels rotate, and even when the vehicle is stationary, tire pressure can increase in hot weather. In other words, tire pressure can change. There are generally three reasons for abnormal tire pressure: Abnormal Tire Pressure: The system typically alerts when the pressure is below 1.8 bar or exceeds 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire Pressure Monitoring Not Reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previously recorded data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged Tire Pressure Sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can trigger the tire pressure warning light. In such cases, the only solution is to replace the sensor with a new one.

1

0

Share

How to Install License Plate Nuts?

Installation method is as follows: 1. Prepare the screw components, including spacers, screws, and caps, which need to be obtained from the vehicle management office. Do not use your own screws for fixing. If the screw components are not fixed according to regulations, you may face penalties; 2. At the location where the license plate is to be mounted on the car, you can see the fixing points. Place the side of the license plate with the license plate number facing outward, then align it with the car's fixing points, ensuring the middle holes are also aligned; 3. Insert the screws into the holes and secure them with a flat-head screwdriver. Do not tighten them completely; just ensure the screws do not fall out; 4. Install screws at all other fixing points, similarly securing each screw without tightening them completely. If tightened prematurely, it will be difficult to adjust the position later; 5. After all screws are in place, adjust the license plate position, then fully tighten all screws; 6. Finally, align the caps with the spacers and press them into the screws with slight force to secure them in place. The license plate installation is now complete.

3

0

Share

What are the differences between cornering lights and adaptive headlights?

Turn assist lights are fundamentally different from adaptive headlights in the following ways: 1. Adaptive headlights achieve their function by rotating the reflector cup and bulb; turn assist lights use a small bulb set at a special angle within the headlight that lights up at specific times to achieve the same effect. 2. In practical use, the effectiveness of turn assist lights in illuminating blind spots is not as good as that of adaptive headlights. Additional information: Details about turn assist lights and adaptive headlights are as follows: 1. Turn assist lights refer to a separate set of bulbs that light up on one side when the driver turns the steering wheel (some vehicles also use fog lights as turn assist lights), helping to illuminate the blind spots in the curve while driving. Shortly after the steering wheel is straightened, the single-sided turn assist light will turn off. 2. Adaptive headlights, also known as dynamic bending lights, refer to headlights that can rotate a certain angle in the direction of the turn when the car is turning, expanding the field of vision. This helps to illuminate the "unreached" area in advance, providing all-around safety lighting to ensure the driver has the best visibility at all times.

14

0

Share

What Causes a Decrease in Vehicle Power?

There are several reasons for a decrease in engine power: 1. Poor gasoline quality and fuel line blockage. 2. Improper tire pressure. 3. Excessive carbon buildup and spark plug wear. 4. Dirty throttle body or slipping/damaged belts. Precautions for using a car engine are as follows: 1. Avoid driving in neutral: The engine inherently has a fuel-cut function during deceleration, and driving in neutral is not conducive to fuel economy. 2. Pay attention to observation while using the vehicle. If oil is found on the ground, determine whether there is an engine oil leak and promptly communicate with the car 4S shop to eliminate potential safety hazards. 3. For cars equipped with turbochargers, do not turn off the engine immediately after high-speed driving or climbing a slope. Let it idle for 10 minutes before shutting it down. Turbocharged engines accumulate carbon deposits several times faster than naturally aspirated engines. 4. When brake fluid is contaminated with water or impurities, or if sediment is found, it should be replaced or carefully filtered promptly. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.

11

1

Share

Should ix35 use 5w30 or 5w40?

Can I pick up the ordered car later?

Will 4S stores sell flooded cars as new cars?

What Do the Two Numbers in Tire Pressure Display Represent?

How to Install License Plate Nuts?

What are the differences between cornering lights and adaptive headlights?

What Causes a Decrease in Vehicle Power?

Why does the oil light come on after just changing the oil?

Where is the radiator located in the Volkswagen Lavida?

What are the differences between soft-top and hard-top convertibles?

How to Remove the Cabin Air Filter of Buick Envision?