···
Log in / Register

Should I Wait for the Voice Prompt Before Starting Reverse Parking?

5 Answers
Terrence
07/29/2025, 06:54 PM

Reverse parking should begin upon hearing the voice prompt. Below are relevant details about reverse parking: Key points of the reverse parking test: Accurately judge the vehicle's position and maneuver it correctly into and out of the garage from both sides by referring to ground markings. During the test, the vehicle must not stop while moving forward or backward. The process involves reversing from one end of the road control line (where the vehicle body crosses the control line) into the garage to park; then moving forward out of the garage, passing the control line at the other end, and reversing back into the garage to park; finally, moving forward out of the garage. Test evaluation criteria: Not following the prescribed route or sequence results in a 100-point deduction; the vehicle body crossing the line results in a 100-point deduction; failing to properly reverse into the garage results in a 100-point deduction; stopping midway results in a 100-point deduction.

Was this review help?
20
2
Share
VanJake
08/15/2025, 08:30 PM

I've been driving for over a decade, and during the reverse parking test, you must wait for the voice command to begin. The exam rules are very clear - after you're seated properly, the examiner or system will give a voice prompt saying 'Begin reverse parking', and only then can you start. Starting the maneuver prematurely will result in immediate point deductions or even failure. The purpose of the voice command is to standardize the operation procedure and prevent candidates from making impulsive mistakes. During practice, I also recommend simulating this environment, such as having a friend give verbal commands or using recorded reminders on your phone, as this makes it easier to adapt to the rhythm during the actual test. For reverse parking, it's crucial to pay extra attention to your surroundings – don't focus solely on the voice command and forget to check your mirrors and blind spots. Safety comes first, and with gradual practice, you'll definitely master it.

Was this review help?
13
0
Share
Expand All
VanBrady
10/18/2025, 01:33 AM

During the process of teaching someone to drive, I always emphasize that reversing into a parking space must begin strictly upon hearing the voice command. The examination rules require candidates to wait for a clear verbal prompt before acting, such as only turning the steering wheel after the system says 'Please start reversing.' Initiating the maneuver without the command will be considered a violation of procedures and result in point deductions. This design aims to cultivate safe driving habits and enhance responsiveness to the environment. During practice, focus on improving reaction speed: pause briefly after the voice prompt, confirm the parking space and obstacles, then reverse slowly. While the reversing technique itself isn't overly complex, neglecting these rules may lead to retaking the test.

Was this review help?
11
4
Share
Expand All
DiBrielle
12/01/2025, 01:13 AM

As a beginner driver, during the reverse parking test, you must wait for the voice command before starting the operation. I remember being criticized by the instructor during practice for moving too early, who said doing so in the exam would result in disqualification. The voice prompt is played inside the car, usually after the system or examiner gives the 'start' command, and only then can you proceed. Newcomers might find it unnecessary, but it helps maintain focus and prevents mistakes due to distraction. During practice, I used to record the voice command on my phone to simulate the scenario and cultivate patience. For reverse parking, it's also crucial to pay attention to reference points and rearview mirror adjustments—the voice command is just the starting point, so don't let it intimidate you. With a few good practice sessions, passing becomes much easier.

Was this review help?
2
2
Share
Expand All
OAdelyn
01/21/2026, 02:36 AM

During my driver's license test, I personally experienced the importance of waiting for the voice command before starting the reverse parking. Starting to reverse before the voice prompt resulted in an immediate error recorded by the examiner, sometimes even a zero score. This rule ensures all candidates begin at the same time, preventing chaos. After the voice prompt triggers, you should first observe your surroundings to confirm safety before operating. During practice, it's advisable to incorporate the waiting step to get accustomed to this—pause briefly after the voice ends, don't rush to step on the accelerator. The rule may seem strict, but it actually safeguards both safety and fairness.

Was this review help?
16
0
Share
Expand All
More Forum Discussions

What is the name of the first Mars rover?

The first Mars rover is named "Zhurong". In traditional Chinese culture, Zhurong is revered as the earliest god of fire, symbolizing the illumination of the earth with fire and bringing light. Naming the first Mars rover Zhurong signifies igniting the spark of interstellar exploration, guiding humanity's continuous exploration and transcendence of the vast starry sky and the unknown universe. Below is relevant information: Introduction: The "Zhurong" Mars rover stands 185 centimeters tall and weighs approximately 240 kilograms. It has a designed operational lifespan of 3 Martian months, equivalent to about 92 Earth days. The "Zhurong" Mars rover will conduct exploration work on Mars, including surface composition, material type distribution, geological structure, and Martian meteorological environment. Launch time: The first Mars exploration mission, the "Tianwen-1" Mars probe, was successfully launched into orbit on July 23, 2020, and was successfully captured by Mars on February 10 this year, smoothly entering the Martian orbit in preparation for the landing of China's first Mars lander "Tianwen-1" and the "Zhurong" Mars rover on Mars in mid-to-late May.
12
1
Share

Can a low battery voltage be repaired?

This depends on how much the voltage has dropped and whether it's caused by reduced capacity or a faulty cell in the battery. For example: A 6V battery consists of three cells, each providing 2V. If the voltage drops below 4V, it indicates one faulty cell. To repair it, you would need to replace the plates of that cell, typically the brown positive plates that often fail. If the voltage remains above 5V during use, it suggests the battery has insufficient capacity for the load. In this case, you should either increase the battery capacity or reduce the load to prevent over-discharging, which shortens battery life. Below are relevant details: Check if the charger is damaged and if the charging parameters meet requirements: Initial charging current should reach 1.6-2.5A/cell; maximum charging voltage should reach 14.8-14.9V/cell, charging-to-floating current conversion should reach 0.3-0.4A/cell, and floating voltage should reach 14.0-14.4V/cell. Inspect the battery for dryness: Check if the battery shows signs of dryness (severe electrolyte loss) and whether the plates have irreversible sulfation. Irreversible sulfation can be determined by measuring terminal voltage changes during charge/discharge cycles. During charging, the battery voltage rises unusually quickly, with some cells showing abnormally high voltages far exceeding normal values; during discharge, voltage drops unusually fast, indicating the battery can't hold or barely holds charge. These symptoms confirm irreversible sulfation has occurred.
16
0
Share

Do I need to take a test if my driver's license is deducted 11 points?

No, you do not need to take a test if your driver's license is deducted 11 points. Only when the total deduction reaches 12 points will you be required to attend a study session and take a test. If a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority shall confiscate their motor vehicle driver's license. Below are relevant details: Attend a seven-day road traffic safety law study: The motor vehicle driver must report to the traffic management department of the public security authority at the place where the driver's license was issued or where the violation occurred within 15 days to attend a seven-day study session on road traffic safety laws, regulations, and related knowledge. After completing the study, the vehicle management office shall administer a test on road traffic safety laws, regulations, and related knowledge within 20 days. Other regulations regarding driver's licenses: If a motor vehicle driver is unable to process license renewal, inspection, or submit a physical condition certificate within the specified time due to military service, traveling abroad, or other reasons, they may apply for an extension at the vehicle management office where the driver's license was issued. When applying, the driver must fill out an application form and submit their identity proof, driver's license, and proof of the reason for the extension. The extension period shall not exceed three years. During the extension period, the motor vehicle driver is not allowed to drive.
5
5
Share

Where is the car ACC located?

The car ACC wire is located in the car's fuse box. Open the car's fuse box, turn off the vehicle's power, and ensure the dashboard lights are off. Locate the yellow fuse inside the fuse box and test it with the tip of a test pen to check if the circuit has power. When the vehicle's power is turned on, if the yellow fuse lights up on the test pen, it can be confirmed as the ACC wire. ACC wire function: The ACC wire is the power-on wire, meaning it connects to the key-controlled ACC power supply. When the key is in the ACC position, i.e., when the ACC wire is connected, some of the vehicle's electrical devices, such as the radio and audio system, are powered on, but other components of the vehicle remain without power. ACC wire connection method: Locate the position of the car's ACC wire, then secure the daytime running lights in the appropriate position, and proceed with the wiring process. Connect the black wire to the ground or the negative terminal of the battery; connect the red wire to the ACC relay; connect the two white wires to the headlight fuse; and connect the two yellow wires (or one yellow and one green) to the turn signal positive terminal. After completing the wiring harness installation, recheck to ensure there are no loose connections.
15
4
Share

What is the ground clearance of the 2021 BMW X1?

2021 BMW X1 has a ground clearance of 170mm. The minimum ground clearance of the 2021 BMW X1 refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. The higher the ground clearance of the 2021 BMW X1, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The 2021 BMW X1 is the most compact SUV model in BMW's lineup, officially released in July 2009 and subsequently launched for sale. The dimensions of the 2021 BMW X1 are 4565mm in length, 1821mm in width, and 1620mm in height, with a wheelbase of 2780mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the 2021 BMW X1 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the 2021 BMW X1. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For those frequently traveling to remote areas or driving on rough terrain, a vehicle with higher ground clearance is advisable to avoid underbody scraping or damage, considering its off-road performance.
8
5
Share

What is the national subsidy for purchasing electric vehicles?

Plug-in hybrid passenger vehicles can receive a maximum subsidy of 50,000 yuan per vehicle; pure electric passenger vehicles can receive a maximum subsidy of 60,000 yuan per vehicle. Here is more information about electric vehicles: Source: The "New Energy Vehicle Subsidy Standards" were established to implement the State Council's deployment and requirements for cultivating strategic emerging industries and strengthening energy conservation and emission reduction. Brief Description: Electric vehicles (BEV) refer to vehicles powered by on-board power sources, driven by electric motors to move the wheels, and meeting all requirements of road traffic and safety regulations. Due to their relatively smaller environmental impact compared to traditional vehicles, their prospects are widely regarded as promising.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.