Should I Use Recirculation or Fresh Air Mode When Running AC in Summer?

Can you turn right at a red light at a Y-shaped intersection?

You can turn right at a red light when there is no explicit arrow signal at the intersection. In such cases, you may proceed directly with the right turn. However, if there is an explicit arrow signal at the red light, you must obey the traffic light when making a right turn. In most urban intersections, right turns on red are permitted, but some special intersections require compliance with traffic signals, usually indicated by signs. When driving on general urban roads, as long as you do not speed, run red lights, smoke while driving, use your phone, and wear your seatbelt, you are unlikely to commit any traffic violations. Legal Regulations: According to the "Road Traffic Safety Law," the regulations on traffic lights are as follows: Article 25, Paragraph 2: Traffic signals include traffic lights, traffic signs, road markings, and the directions of traffic police. Article 26: Traffic lights consist of red, green, and yellow lights. A red light indicates prohibition, a green light indicates permission, and a yellow light serves as a warning. Article 38: Vehicles and pedestrians must follow traffic signals. In the presence of traffic police directing traffic, they must follow the police's directions. On roads without traffic signals, they must proceed under the principles of safety and smooth traffic flow. Article 62: Pedestrians crossing intersections or roads must use crosswalks or pedestrian facilities. At signalized crosswalks, they must follow the traffic signals. At intersections without signals or crosswalks, or when crossing roads without pedestrian facilities, they must ensure safety before proceeding. Article 89: Pedestrians, passengers, or non-motorized vehicle drivers violating road traffic safety laws or regulations may receive a warning or a fine ranging from 5 to 50 yuan. Non-motorized vehicle drivers refusing to pay fines may have their vehicles impounded. Motor vehicle drivers violating traffic signals will receive a 6-point penalty. Right-Turn Precautions: Observe oncoming straight-moving vehicles: When turning right, check both the right and left sides for traffic. Watch for opposing left-turning vehicles: In addition to straight-moving vehicles, be aware of any left-turning vehicles from the opposite direction. Yield to both left-turning and straight-moving vehicles before proceeding. Look out for pedestrians: Besides crosswalks before the intersection, there may also be crosswalks at the corner. Always check for pedestrians when turning right.

11

4

Share

Is the Honda CRV transmission using a steel belt or a steel chain?

Honda CRV transmission uses a steel belt. Below is extended information about the transmission: 1. Depending on the structure of the transmission, transmission fluid is divided into manual transmission fluid and automatic transmission fluid. 2. Manual transmission fluid, commonly referred to as gear oil. It is an important lubricant primarily made from petroleum-based lubricating oil or synthetic lubricating oil, mixed with extreme pressure anti-wear agents and oiliness agents. It is used in various gear transmission devices to prevent gear surface wear, scuffing, sintering, etc., extending their service life, improving power transmission efficiency, and reducing power loss. 3. Automatic Transmission Fluid (ATF) refers to the specialized fluid used in automatic transmissions. The dedicated automatic transmission fluid serves as the hydraulic fluid for the torque converter, the lubricant for the planetary gear structure, and the hydraulic oil for the shifting mechanism.

2

0

Share

What does SAE stand for?

SAE is the abbreviation for the Society of Automotive Engineers in the United States, and the SAE grade represents the viscosity grade of oil. Below is relevant content introduction: 1. Engine oil refers to the lubricating oil specifically used in internal combustion engines, which, in addition to lubrication, also has functions such as cleaning, rust prevention, and cooling. 2. The base oil of the engine oil currently in use is composed of hydrocarbons, poly-alpha-olefins, and poly-internal olefins, all of which are organic compounds consisting solely of carbon and hydrogen. Some high-grade engine oils may contain up to 20% esters. 3. There are many types of engine oil available on the market today. It is best not to mix two different brands of engine oil, as different brands use different additives, and mixing can cause the oil to deteriorate.

12

5

Share

How to switch between fuel and electric power in BYD Qin?

BYD Qin can switch between fuel and electric power by selecting different driving modes. The relevant information is as follows: 1. The second-generation DM technology equipped in BYD Qin has four working modes, namely EV+ECO, EV+SPORT, HEV+ECO, and HEV+SPORT. Especially in HEV+ECO mode, different power distributions are made under different working conditions to achieve the best comprehensive economy, allowing for free switching. When the starting speed is below 40KM/H, it is driven purely by electricity. When the speed exceeds 40KM/H and the engine is in the economical fuel consumption zone (1500-3500 rpm), it is driven by fuel. 2. The driving modes of BYD Qin include pure electric plus economy, pure electric plus sport, hybrid plus economy, and hybrid plus sport.

19

0

Share

Release the Clutch or Brake First?

Braking and deceleration require coordination between the clutch and foot brake. The best practice for braking and deceleration is to press the brake first, and when the speed reaches a certain level, then press the clutch to shift gears. Alternatively, by utilizing engine braking, you can also press the brake first, and when the speed reaches a certain level, press the clutch to assist in deceleration without shifting gears. Here are some additional details: 1. Regardless of how you decelerate, always press the brake first. When the clutch is pressed, the clutch separates from the transmission shaft, putting the car in a neutral state. In this situation, pressing the brake again may cause the car to skid. Drivers with less experience may struggle to maintain vehicle stability. Therefore, when not stopping or shifting gears, there is no need to press the clutch. When decelerating, press the brake first. If the speed drops significantly, you can choose to press the clutch and shift gears. 2. Frequently pressing the clutch can damage the car. However, one important thing to note is that when the speed and gear do not match, it can easily cause the engine to stall. When decelerating by pressing the brake, always pay attention to the timing of pressing the clutch or consider skipping gears to shift to a lower speed.

6

0

Share

What are the components of a universal transmission device?

Universal transmission devices mainly consist of universal joints, drive shafts, and intermediate supports. The detailed introduction is as follows: 1. A universal transmission device is used to transmit power between two shafts whose relative positions constantly change during operation. 2. Its function is to connect the transmission output shaft and the main reducer input shaft that are not on the same straight line, ensuring reliable power transmission even when the angle and distance between the two shafts frequently change. 3. Universal transmission devices are installed between the transmission and the drive axle, as well as between the inner and outer half-shafts of the steering drive axle. During installation, the universal joint forks at both ends of the drive shaft must be aligned in the same plane.

3

1

Share

Should I Use Recirculation or Fresh Air Mode When Running AC in Summer?

Can you turn right at a red light at a Y-shaped intersection?

Is the Honda CRV transmission using a steel belt or a steel chain?

What does SAE stand for?

How to switch between fuel and electric power in BYD Qin?

Release the Clutch or Brake First?

What are the components of a universal transmission device?

What does V2X mean?

What are the consequences of spraying underbody coating on the exhaust pipe?

How to Deal with Automatic Transmission Gear Misalignment

Will there be a fine if the vehicle inspection is overdue for a few days?