Should I start the engine directly or wait for the voice prompt in Subject 3?

1 Answers
CeciliaLee
07/29/25 4:47pm
In Subject 3, you should start the engine directly first and then wait for the voice prompt. The road driving skill test content of Subject 3 generally includes: vehicle preparation, lighting simulation test, starting, straight-line driving, gear shifting operation, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, night driving, and safe and civilized driving knowledge test content. The following are the precautions for the Subject 3 test: Inspect the vehicle before getting on: Before getting into the vehicle, you need to walk around the vehicle for inspection. There are two sensors on the test vehicle. When the candidate walks around the vehicle, the sensors must detect the candidate to complete this step. If this step is skipped, points will be deducted. Adjustments after getting on the vehicle: After getting into the vehicle, first adjust the seat to a suitable angle and position, then fasten the seat belt. This is the most important step. If the seat belt is not fastened, you will directly fail the test. After that, adjust the rearview mirror and then start the engine after adjusting the gear. Body movements: During the test, candidates must perform certain body movements, such as looking back to observe. These movements must be done correctly to avoid point deductions due to improper actions. Follow the voice prompts: During the test, you must operate according to the voice prompts and follow the steps of the voice one by one. Do not operate in advance, otherwise points will be deducted. Adjust your mentality: During the test, you must adjust your mentality. Many candidates become extremely nervous when hearing the voice prompts and easily forget the next steps. Candidates must be mentally prepared before the test.
Was this review help?
7
0
Share
More Forum Discussions

What grade of gasoline should be used for the Ford Mondeo?

Ford Mondeo uses 92-octane gasoline. More information about the Ford Mondeo is as follows: 1. As the flagship model of Changan Ford with the highest technological content and most refined manufacturing process, the Ford Mondeo not only incorporates multiple innovative technologies but also achieves comprehensive improvements in premium quality, powertrain, and safety performance. 2. The new Ford Mondeo offers 7 models with two displacement options: 1.5T and 2.0T. The all-new Mondeo adopts Ford's latest family-style exterior design. The most eye-catching feature is the catfish-mouth grille with dual chrome horizontal bars. The entire series is equipped with LED headlights, which includes not only LED daytime running lights but also LED headlight sources.
9
3
Share

Will Changing Lanes Over Solid Lines on Highways Definitely Be Captured by Cameras?

Changing lanes over solid lines on highways will definitely be captured by cameras. Normally, changing lanes over solid lines is considered driving against traffic markings and will result in a fine and a 3-point deduction. However, rules are rigid. When encountering special circumstances ahead, or when directed by traffic police on-site, or when emergency vehicles are performing tasks, it would be unreasonable to wait until the issue is resolved before proceeding. Therefore, changing lanes over solid lines in such situations will not be considered a violation. Lane Change Over Solid Lines Camera System: The camera system for detecting lane changes over solid lines uses ground-pressure magnetic induction loops. The principle of capturing images is as follows: when the front wheels of a vehicle pass over the induction loop on the ground, the electronic system captures the first photo; when the rear wheels pass over the induction loop, the electronic device captures the second photo; when the vehicle crosses the intersection and passes over the induction loop on the opposite side, the electronic device captures the third photo. Lane Change Over Solid Lines Photo Enforcement: The photo enforcement for lane changes over solid lines is activated 24 hours later, and the images and related data are retained for one week. For lane changes over solid lines that do not result in major safety incidents, they usually will not be captured. If temporary license plates are used on new vehicles, due to material issues, it is difficult for electronic violation cameras to capture them clearly. However, traffic police remind everyone not to take chances. For certain special circumstances and sections, crossing white solid lines will not be penalized, as there is still a buffer period for everyone to adapt. Once the adaptation period ends, strict penalties will be enforced. It is hoped that everyone can adapt to the new regulations as soon as possible.
3
2
Share

How Much Horsepower Does the Mustang 2.3T Have?

The Mustang 2.3T has 299 horsepower. Here are some details about the Mustang 2.3:1. The Mustang's 2.3-liter turbocharged engine delivers a maximum power of 220 kW and a maximum torque of 434 Nm. The engine reaches its peak power at 5,400 rpm and its peak torque at 3,000 rpm. 2. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 10-speed automatic transmission. The Mustang's front suspension uses a MacPherson strut setup, while the rear suspension employs a multi-link independent suspension. 3. The Mustang measures 4,794 mm in length, 1,916 mm in width, and 1,373 mm in height, with a wheelbase of 2,720 mm.
1
0
Share

What is the fuel consumption difference between the 2WD and 4WD versions of the Highlander?

Introduction to the fuel consumption difference between the 2WD and 4WD versions of the Highlander: The difference in fuel consumption per 100 kilometers between the 2WD and 4WD versions of the same model is approximately 0.2 to 0.5 liters. The comprehensive fuel consumption of the Highlander 2WD Luxury version is 8.3L per 100 kilometers, while the 4WD Luxury version is 8.7L per 100 kilometers, showing a difference of about 0.4L. However, based on actual measured fuel consumption, both vehicles are around 10.1L to 10.3L per 100 kilometers. Below are the factors that affect a car's fuel consumption: 1. Air conditioning cooling and electricity usage; 2. Driving conditions; 3. Vehicle weight and condition, engine oil performance, tire pressure, and tire resistance; 4. Driving habits and braking habits; 5. Engine temperature (optimal around 70 degrees; too low, and the engine oil viscosity increases, reducing lubrication; too high, and the oil's adhesion decreases, reducing lubrication, while the cooling fan consumes electricity and thus fuel); 6. Vehicle body design.
16
0
Share

How to Replace the Battery in a Cruze Remote?

Steps to replace the battery in a Chevrolet Cruze remote: 1. Insert a flat-head screwdriver into the contact slot on the back cover and pry it open to separate the back cover from the wireless remote. 2. Insert the screwdriver into the middle of the contact slot, turn it a quarter turn, and pry open the back cover of the electronic key. 3. Install the battery with the positive terminal facing upwards into the back cover of the wireless remote, then press the cover to secure it in place. Below are some details about the Chevrolet Cruze: 1. The Chevrolet Cruze is equipped with two engines, a 1.5L and a 1.4T, with maximum power outputs of 114 horsepower and 150 horsepower respectively. 2. In terms of the transmission system, the 1.4T model is paired with a 7-speed dual-clutch transmission, while the 1.5L model is paired with a 6-speed automatic transmission and a 6-speed manual transmission.
17
2
Share

How Many Years Can a Toyota Camry Last?

Camry can last 15 years or more. Below is the relevant introduction about Camry: 1. Exterior: Camry features dual styling designs: Luxury and Sport. The Luxury version adopts a large trapezoidal horizontal grille, with a streamlined body posture, lower waistline, and an extended roof rear section to increase rear headroom. The Sport version features a three-layer grille front face, introduces a two-tone body and "all-black" cabin design for the first time, and adopts a dual exhaust pipe design at the rear. 2. Interior: The interior adopts an asymmetrical design with a Y-shaped curve on the center console. Soft interior surfaces and metal trim panels use premium materials. The instrument panel and center console trim panels feature the three-dimensional surface decoration process (TOM) for the first time, creating a visually three-dimensional effect. The seats have a sporty three-dimensional design, using new springs and high-density, high-damping polyurethane material cushions.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.