Should I Continue Driving or Stop in the Left-Turn Waiting Zone When the Light Turns Red?

1 Answers
McCharlie
07/30/25 4:15am
When the left-turn signal turns red after a vehicle has entered the waiting zone, it should continue to proceed since it has already passed the stop line and does not count as running a red light. However, the vehicle must not stop in the waiting zone. Below are some relevant details about left-turn waiting zones: 1. Purpose: The left-turn waiting zone lane is several meters long. Based on China's road width standards, urban arterial roads have a width of 3.5 meters per motor vehicle lane. Roads implementing the 'left-turn waiting zone' are generally one-way roads with three or more lanes. It is estimated that 3 or 4 additional vehicles can pass per traffic signal cycle, amounting to approximately 100 vehicles per hour, effectively increasing the traffic flow at intersections and reducing vehicle congestion. 2. Precautions: The 'left-turn waiting zone' is exclusively for left-turning vehicles. When the straight-through signal in the same direction turns green, even if the left-turn signal is red, left-turning vehicles are permitted to enter the 'left-turn waiting zone' at the intersection and wait until the left-turn signal turns green before proceeding through the intersection. The left-turn waiting line is not a 'stop line.' If both the straight-through and left-turn signals are red, all vehicles must wait behind the previous stop line.
Was this review help?
3
0
Share
More Forum Discussions

What are the methods for disinfecting the interior of a car?

Methods for disinfecting the interior of a car include: 1. Chemical disinfection: This primarily involves spraying and wiping the car with disinfectants to eliminate bacteria. However, these disinfectants can have some corrosive effects on the metal parts of the car and are not very effective against airborne droplets and bacteria. 2. Ozone disinfection: This is currently a widely adopted method, with the advantage of short disinfection time and thorough elimination of bacteria inside the car. 3. Steam disinfection: Using steam to sterilize and disinfect or utilizing the heating function of the car's air conditioning system to flush the air conditioning evaporator, while drying with the air conditioning's hot air to achieve deodorization and sterilization. Molds have a strong ability to survive high temperatures. For example, aflatoxin cannot be completely destroyed even in a high-temperature environment of 300 degrees Celsius. Therefore, relying solely on the hot air from the air conditioning to dry and remove mold is generally not very effective.
6
1
Share

What is the method for removing car headlights?

Method for removing car headlights: 1. After opening the engine compartment cover, you can see the dust cover behind the headlight assembly; 2. Unscrew it directly along the threaded direction, and then you can see the bulb base inside the headlight assembly; 3. Pinch the steel wire clip next to the base, and after the clip is released, the bulb can be taken out. Car headlights, also known as car front lights or car LED daytime running lights, have two types: low beam and high beam. The main function is for nighttime driving illumination. Low beams are used for urban roads with streetlights, while high beams are used for roads without streetlights or highways in suburban areas. There is also a switch between low and high beams, used for signaling or overtaking.
12
1
Share

What is the meaning of the guide arrows on the road?

Guide arrows on the road indicate that the road ahead can only be driven according to the direction of the arrows, mainly providing directional information for traffic participants. Traffic signs and road markings are traffic management measures that use text, symbols, lines, or colors to guide, warn, regulate, or indicate traffic. More details are as follows: 1. They provide pedestrians and drivers with accurate road traffic information, aiming to achieve smooth, safe, low-pollution, and energy-saving traffic. According to their different functions, traffic signs and road markings are generally divided into four types: guiding, warning, regulatory, and indicative. 2. They provide drivers with information about potential hazards or points of attention on or along the road, such as the presence and shape of intersections, the direction of road curves, narrowing roads, reduced lanes, slippery roads, steep slopes, construction zones, etc., to alert people.
13
2
Share

What engine does the McLaren F1 use?

The engine of the McLaren F1 was developed by BMW, with the code name S70/2. The McLaren F1 is equipped with a 6.1L 60-degree V12 naturally aspirated engine, which delivers a maximum power output of 461 kW and a maximum torque of 651 Nm. More details about the McLaren F1 are as follows: 1. The McLaren F1 is a classic sports car produced by McLaren. This car was developed and produced by McLaren engineers incorporating a significant amount of F1 racing technology, hence the name F1. 2. The McLaren F1 utilizes a lot of racing technology in its production, but the only drawback of this car is that it does not use carbon fiber brake discs, possibly due to the brake tuning issues of this car, which led to the absence of top-tier brake discs. 3. The chassis of this car is very low, almost as if it is close to the ground. The design philosophy of the McLaren F1 is compact and sleek. The dimensions of this car are 4288*1820*1140 mm, with a wheelbase of 2724 mm.
7
4
Share

What is the minimum ground clearance of the Ford Kuga?

The minimum ground clearance of the Ford Kuga is 210mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Below is some relevant information: 1. Generally speaking, the greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which can increase stability. 2. The minimum ground clearance must consider the passability when loading and unloading on transport platforms, as well as the possibility of the car not scraping when approaching the edge of a typical sidewalk. If the vehicle is restricted for sale to a specific country or region, the local road quality must also be considered. Additionally, the value of the minimum ground clearance has certain limitations, as it is related to the vehicle's function and aerodynamics. 3. Some models have a range of values for the minimum ground clearance, indicating that they may be equipped with adjustable suspension, allowing the ground clearance to change according to driving conditions.
10
4
Share

What are the body dimensions of the Volkswagen Touran?

The length, width, and height of the Touran are 4527mm, 1829mm, and 1659mm respectively, with a wheelbase of 2791mm. Below is the relevant information: 1. The Touran is an MPV model under the Volkswagen brand. 2. The new Touran series is equipped with a 1.4-liter turbocharged engine. This engine has a maximum power output of 110kW and a maximum torque of 250 Nm. It can deliver maximum power at 5000 rpm and maximum torque between 1750 to 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The new Touran uses a MacPherson independent suspension at the front and a four-link independent suspension at the rear.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.