Should I Choose 'Destroyed' or 'Lost' for the Driving License?

2 Answers
VanValeria
07/28/25 4:28pm
Both options are acceptable. After the driving license is destroyed or lost, it is necessary to promptly apply for a replacement at the local vehicle management office or traffic police station. The materials required for replacing a driving license are as follows: 1. Application Form: One copy of the 'Motor Vehicle Driving License Application Form', which can be obtained on-site at the vehicle management office. 2. Identification Documents: Original and photocopy of the applicant's ID card. If an agent is handling the process, the original and photocopy of the agent's ID card are also required. 3. Vehicle Registration Certificate: The vehicle registration certificate. If the vehicle was purchased with a loan and the loan has not been fully repaid, the registration certificate can be obtained from the dealer. 4. Photos: Vehicle photos need to be taken again at an motor vehicle inspection point. For non-local residents, the original and photocopy of the residence permit are required. The replacement process for a driving license typically takes about 30 minutes.
Was this review help?
9
0
Share
VonQuinn
08/11/25 11:18pm
I remember driving for over twenty years and have encountered issues with the vehicle license a few times. Selecting 'destroyed' usually means the car was scrapped after an accident, such as being burned or flooded, and the license was lost along with it—that's force majeure. Choosing 'lost' means you misplaced it yourself, perhaps forgot where you put it. Filling out the form incorrectly when reapplying can be troublesome; for 'destroyed,' you need to provide a police report or accident proof, while 'lost' is simpler, requiring only a declaration. Last time, my neighbor selected 'destroyed' but the car was fine, and they got stuck at the DMV, wasting time. I suggest you calm down first and think carefully—is the license completely destroyed or might it still be found? If you just forgot to bring it, search your home or car thoroughly. If you really can't find it, go to the DMV and select 'lost' to apply for a new one. Remember to bring your ID and photos, fill out the application, and usually it’ll be ready in a few days. Safety first—keep your documents secure and don’t misplace them.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

Where are seat belts mainly used?

Seat belts are safety components used on equipment, such as when riding aircraft like airplanes, or in vehicles, high-altitude work, and performance arts to ensure safety. A seat belt does not only refer to the webbing; besides the webbing, seat belts also consist of other assembled components. Depending on the usage conditions, seat belts can be divided into the following three categories: 1. Pole work seat belts: These secure the human body near a fixed structure by wrapping a rope or belt around it, allowing the worker's hands to perform other operations. 2. Area restriction seat belts: These limit the worker's range of movement to prevent them from reaching areas where falls may occur. 3. Fall arrest seat belts: These are used to suspend workers in the event of a fall during high-altitude work or climbing.
19
3
Share

Where to Check the Number of Tire Plies?

Tire ply ratings can be found in the sidewall specifications, such as 6PR, 8PR, 10PR, etc. The corresponding relationships for automotive tire ply rating codes are: A represents 2 plies, B represents 4 plies, C represents 6 plies, D represents 8 plies, E represents 10 plies, F represents 12 plies, G represents 14 plies, H represents 16 plies, J represents 18 plies, L represents 20 plies, M represents 22 plies, N represents 24 plies. The number of tire plies refers to the rubber layers in automotive tires, later also expressed as ply ratings. However, ply ratings don't completely indicate the actual number of layers - for example, a 2-ply rated tire may actually contain up to 14 layers.
5
2
Share

Why is the clutch of the test car particularly high?

When the clutch is high, the gears separate faster, allowing for earlier gear shifting, which makes acceleration operations more seamless. To quickly adapt to the height of the test car's clutch, the method is to engage first gear and gradually release the clutch to get used to the pedal's varying height while ensuring no stalling or rolling. Here are some clutch control techniques: The general approach to the clutch is "fast, slow, fast" or "fast, pause, slow." This is because initially releasing the clutch involves the engagement part between the clutch and the engine, which can be done quickly. However, when reaching the clutch point, it needs to be slower or paused briefly to ensure full engagement. After passing the engagement point, the clutch can be released at a speed that is either fast or slow, depending on personal preference.
16
3
Share

What is the replacement method for the fuel filter?

The replacement method for the fuel filter is: 1. Park the car on a solid, level surface and reduce the pressure in the fuel system. 2. Start the engine until the fuel in the pipes is exhausted and the engine stops, then remove the mounting bolts of the fuel filter. 3. Compare the new fuel filter with the removed one to ensure they are of the same model, then install the new fuel filter. 4. Reconnect the fuel line and install the fuel pump fuse, reconnect the battery box, and lower the car after completion. Additional information: The recommended replacement interval for the fuel filter should vary based on its structure, performance, and usage. Most car manufacturers recommend replacing external filters under normal maintenance every 48,000 km; under conservative maintenance, the recommended replacement interval is 19,200-24,000 km.
2
5
Share

Which engine is used in the Volkswagen Lamando?

Volkswagen Lamando is equipped with the EA211 engine. Below is an extended introduction to the EA211 engine: The EA211 can be considered an upgraded version of the EA111, with many technological differences between the two. The EA211 leads internationally in lightweight design, power enhancement, torque improvement, and emission reduction: 1. The EA211 engine is the first in China to meet the Euro V standard and enter mass production, while the EA111 meets the National V standard. 2. The EA211's TSI integrates advanced technologies such as turbocharging and direct fuel injection. 3. Compared to the EA111, the EA211 uses an all-aluminum cylinder block, reducing weight by 22KG. 4. In contrast to the EA111, the EA211 employs a high-performance timing belt, which lowers cost and weight and reduces engine noise. However, it requires regular maintenance, increasing upkeep costs.
1
5
Share

Why is Turbocharger Maintenance More Expensive?

Here are the reasons why turbocharger maintenance is more expensive: 1. Turbochargers have higher requirements for engine oil, necessitating the use of high-quality full synthetic oil for maintenance. Compared to semi-synthetic and mineral oils, full synthetic oil has a wider temperature range, is less prone to deterioration, has lower evaporation loss, and offers a longer service life than conventional oils. Full synthetic oil also exhibits less thermal degradation, saves fuel, and provides better engine protection. 2. The greatest advantage of a turbocharger is its ability to significantly increase engine power and torque without increasing engine displacement. After installing a turbocharger, an engine's maximum power output can increase by approximately 40% or more compared to when it is not equipped with one.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.