Should I Buy a Sagitar or a Corolla?

Is the Fit from Dongfeng Honda or GAC Honda?

The Honda Fit is a compact hatchback under GAC Honda and does not belong to Dongfeng Honda. Here is an introduction to the third-generation Fit: 1. The third-generation Honda Fit was launched on May 29, 2014, as a compact hatchback introduced by Guangzhou Honda, positioned as the "Cool Hatchback" in its third generation. The third-generation Fit was the first to be equipped with Honda's new (Earth Dreams Technology) engine. 2. The new 1.5L direct-injection engine delivers a maximum power of 96kW/6600rpm and a maximum torque of 155N·m/4600rpm, ranking first in its class in terms of power performance. It is paired with a new CVT continuously variable transmission.

15

1

Share

How to Use a Prado During the Break-in Period?

During the break-in period of a Prado, it is essential to start in a low gear and avoid sudden acceleration. Shift to a higher gear promptly after starting. Do not drive in first gear or high gear for extended periods. Avoid pushing the engine speed and vehicle speed to their limits in any gear. It is best to keep the engine speed below 3,000 RPM and the speed under 120 km/h. Additional Information: Precautions During the Break-in Period: 1. Warm Up Before Starting: Before starting, turn the key to the second position and wait for 5-10 seconds before ignition. This is because the fuel pump begins working when the ignition is turned on, adjusting fuel pressure and injection volume. Starting after a few seconds helps protect the new engine. 2. Avoid Emergency Braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. It is advisable to avoid emergency braking within the first 300 kilometers of driving. 3. Avoid Overloading: Overloading a new car during the break-in period can damage components. Therefore, within the first 1,000 kilometers, domestic cars should not exceed 75%-80% of the rated load, and imported cars should not exceed 90% of the rated load. Additionally, choose smoother road surfaces to reduce stress on the body and powertrain, avoiding vibrations, collisions, or emergency braking. 4. Avoid High-Speed Driving: New cars have speed limits during the break-in period. Domestic cars are generally limited to 40-70 km/h, while imported cars are limited to 100 km/h. When the throttle is fully open, the speed should not exceed 80% of the maximum speed. Monitor the engine tachometer and speedometer to ensure the engine and vehicle operate at moderate speeds. Typically, the engine speed during the break-in period should be between 2,000-4,000 RPM.

6

1

Share

Differences Between SUVs and Sedans

Differences between sedans and SUVs: 1. Chassis: Sedans have a lower chassis, which results in a lower center of gravity, leading to smaller vehicle tilt angles during turns; SUVs have a higher chassis, allowing them to adapt to various road conditions. 2. Seat comfort: SUVs lean towards a sporty style, so their seats are designed to be firmer; sedans prioritize passenger comfort, hence their seats are generally softer. 3. Fuel consumption: SUVs often consider off-road capabilities, making them heavier in design compared to sedans, and they typically have larger engine displacements, resulting in higher fuel consumption under similar conditions.

18

0

Share

What to Pay Attention to When Making a Left Turn While Driving

Precautions for making turns while driving: 1. Wide turning radius: When making a left turn, try to turn as widely as possible. To avoid hazards such as obstruction or collision, aim to turn into a farther point. 2. Check the rearview mirror: Always check the rearview mirror before turning to ensure there are no vehicles or pedestrians on the side or behind you. 3. Watch for blind spots: Beginners often focus only on the front or left side while turning, neglecting blind spots, which may lead to hitting the curb or causing a scrape. Always check for obstacles below the rearview mirror, and if necessary, open the door to take a look before turning. 4. Control the steering wheel: Proper steering wheel control is crucial when turning. For sharp turns, turn the wheel as much as needed and gradually straighten it after completing the turn. For wide turns, steer slowly and steadily.

16

5

Share

Which brand does the Tourneo belong to?

Tourneo is an MPV under Jiangling Ford, with its English name being Tourneo. Here is more information about the Tourneo: 1. The 2020 Tourneo is equipped with a 2.0-liter turbocharged engine across all models. The manual transmission version uses a 5-speed manual gearbox, while the automatic version uses a 6-speed automatic transmission. 2. The Tourneo's 2.0-liter turbocharged engine delivers 203 horsepower and a maximum torque of 300 Nm. The engine reaches its peak torque at 3,000 rpm and its maximum power at 5,500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The Tourneo is a five-door, seven-seater vehicle with dimensions of 4,976 mm in length, 2,032 mm in width, and 1,990 mm in height, and a wheelbase of 2,933 mm. 4. The Tourneo uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear.

14

1

Share

What is the fuel consumption per 100 kilometers for the Haval Big Dog?

The comprehensive fuel consumption of the Haval Big Dog is 6.9-8.0L/100km. Currently, there are 9 models of the Haval Big Dog on sale. The Border Collie Edition, Husky Edition, Mastiff Wangcai Edition, Mastiff Edition, Labrador Edition, and Border Collie Wangcai Edition have a comprehensive fuel consumption of 6.9L/100km. The Chinese Pastoral Dog Edition and Howling Celestial Dog Edition have a comprehensive fuel consumption of 8L/100km. The Chinese Hunting Dog Edition has a comprehensive fuel consumption of 7.2L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 9.5-10.8L/100km. Specific factors affecting car fuel consumption are as follows: Car weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV weighing about 1.5 tons has a fuel consumption of around 8.5 liters. Different weights result in varying fuel consumption. Wind resistance: Higher wind resistance increases fuel consumption during driving. Cars with better aerodynamics have lower wind resistance, leading to lower fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point for fuel efficiency. Maintaining the car's speed within this torque output point significantly reduces fuel consumption. Typically, small-displacement cars achieve this at about 70 km/h, while larger-displacement cars reach it at around 100 km/h. Staying within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at red lights can increase fuel consumption.

8

0

Share

Should I Buy a Sagitar or a Corolla?

Is the Fit from Dongfeng Honda or GAC Honda?

How to Use a Prado During the Break-in Period?

Differences Between SUVs and Sedans

What to Pay Attention to When Making a Left Turn While Driving

Which brand does the Tourneo belong to?

What is the fuel consumption per 100 kilometers for the Haval Big Dog?

Why does the antifreeze level decrease during use?

How much fuel is needed to fill up the Audi Q3's fuel tank?

What to Do When Turn Signals and Hazard Lights Don't Work?

How to Set Up the Anti-Pinch Feature for BMW 5 Series Windows?