Should I Apply for an Automatic or Manual Transmission Driver's License?

1 Answers
LeNova
08/31/25 8:16am
When applying for a driver's license, you can choose between manual or automatic transmission based on your needs. Below are the differences between a manual transmission (C1) and automatic transmission (C2) driver's license: 1. Different vehicle categories allowed: The C1 license permits driving small cars, micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special-purpose vehicles, and also allows driving C2, C3, and C4 vehicle categories. On the other hand, the C2 license only permits driving small automatic transmission cars (C2), micro automatic transmission passenger vehicles, and light and micro automatic transmission cargo vehicles. 2. Different pass rates: The C1 license has a higher operational difficulty coefficient, so the C2 license generally has a higher pass rate.
Was this review help?
8
4
Share
More Forum Discussions

Can dishwashing detergent remove oil film from cars?

Dishwashing detergent can remove oil film from cars, but it is not recommended as a car cleaning product. Generally, specialized oil film removers are used. Extended information about car cleaning is as follows: Introduction: Car cleaning refers to the cleaning of a car's exterior, which is a common task for every car owner or driver. In recent years, car wash shops have gradually become a hot investment project in many large and medium-sized cities. Classification: Car cleaning is divided into two types: regular cleaning and detailed cleaning. Regular car cleaning refers to traditional manual car washing and tunnel car washing. The other type is detailed car cleaning technology, which involves both interior and exterior cleaning, providing a more thorough and cleaner result compared to traditional car washing.
20
3
Share

Can a B1 driver's license drive a truck?

B1 driver's license can only drive light and mini trucks. The following is relevant information about the B1 driver's license: 1. Introduction: The permitted vehicle type for a B1 license is a medium-sized passenger vehicle, defined as a medium-sized passenger vehicle not exceeding 6 meters in length, with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. Other permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). It is important to note that the B1 license does not include B2 in its permitted vehicle types. If a driver holding a B1 license wishes to drive large trucks, they can upgrade their license to a B1B2 license (or A1, A2, A1A2, etc.). 2. Conditions for upgrading to B1: The applicant must have held a (C1) driver's license for more than three years, be between 21 and 50 years old, and have no full-score (12 points) record in the current scoring cycle (this year) and the most recent scoring cycle (last year) before applying. They can then apply for the upgrade at the vehicle management office in their registered residence, as regulations stipulate that the upgrade to B1 can only be processed at the vehicle management office in the driver's registered residence, not at a temporary residence.
19
3
Share

What Causes a Clicking Noise When Turning the Steering Wheel?

When this situation occurs, a thorough inspection is necessary because there are many potential causes. For instance, the sound could be from the turn signal returning to its position, which is normal. Other possible causes include noises from the steering column dust cover, friction between plastic components, sounds emanating from within the steering wheel, abnormal noises from the shock absorber's thrust bearing, or noises from the stabilizer bar. Here are the relevant details: 1. Steering Column Dust Cover: If the issue is with the steering column dust cover, simply replacing the dust cover or reapplying grease can resolve it. However, reapplying grease is only a temporary solution. Additionally, since the steering wheel is composed of various plastic parts, if the gaps between them are too small, noises may occur, especially in new cars. These noises usually disappear after a break-in period. If the noise persists after the break-in period, try reinstalling the steering wheel. If the noise originates from inside the steering wheel, it might be due to a broken clock spring or a loose clock spring connector. Replacing the clock spring or securing the connector can fix the issue. 2. Thrust Bearing: If the problem lies with the thrust bearing, replacing it is the solution. The thrust bearing connects the vehicle body to the shock absorber, preventing direct friction. It consists of components such as a dust cover, raceway, and ball bearings, located at the top of the shock absorber assembly. Therefore, issues with the thrust bearing can also cause noises when turning the steering wheel.
1
3
Share

What are some good solutions when the car keys are locked inside the car?

Solutions for retrieving car keys locked inside the vehicle are as follows: Spare Key: If the spare key is at home and within a short distance, you can retrieve it. Professional Locksmith or 4S Store Technician Assistance: You may opt for a certified locksmith service, though the cost tends to be higher. If locksmith services are unavailable, seeking help from a 4S store technician is also an option. Contacting a Service Center to Duplicate a New Key: Service centers can typically duplicate a new key based on the vehicle model. However, duplicating a new key requires the owner to provide a 17-digit anti-theft code, which is supplied by the 4S store at the time of purchasing the new car.
20
0
Share

What car has five slashes as its logo?

A car emblem with five slashes represents the older model of Fiat. Here is some relevant information about Fiat: Status: Fiat is the world's first microcar manufacturer, a classic brand with over a century of history, and has always been regarded as the creator of perfect cars. It is a famous Italian automobile manufacturing company and one of the world's top ten automobile companies. Production Locations: Fiat not only has factories in Italy, Argentina, Brazil, Poland, and Venezuela but also extends its business worldwide through joint ventures and licensing agreements. It has adopted a strategy of moderate investment in emerging markets such as Poland, Russia, Brazil, Argentina, Egypt, Morocco, South Africa, Turkey, India, and China.
19
3
Share

What are the body dimensions of the Tiggo 3?

The length, width, and height of this car are 4420mm, 1760mm, and 1670mm respectively, with a wheelbase of 2510mm. Additional Information: Background Introduction: It is a compact SUV under the Chery brand, featuring a very outstanding exterior design. Power Introduction: The Tiggo 3 is equipped with two engines across its lineup: one is a 1.5L naturally aspirated engine, and the other is a 1.6L naturally aspirated engine. The 1.5L naturally aspirated engine has a maximum power of 85kW, a maximum torque of 143 Nm, a maximum power speed of 6150 rpm, and a maximum torque speed of 4000 rpm. Engine Features: This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.