Should I add air if the tire pressure is 210?

2 Answers
CameronAnn
07/29/25 6:32am
Tire pressure at 210 requires inflation, it is recommended to fill up to 250kpa. Tire pressure should not be too high or too low. If the tire pressure is too high, the contact area between the tire and the ground will decrease while driving, which will affect the car's grip and handling. If the tire pressure is too low, the tire may exhibit wave-like deformation during high-speed driving, increasing the risk of a blowout. Tires are the only part of the car that comes into contact with the ground and have a shelf life. Tires can be used for four years, so it is recommended to replace them every four years. After replacing the tires, it is essential to perform a dynamic balance again to prevent abnormal shaking of the wheels during high-speed driving.
Was this review help?
4
2
Share
DiWeston
08/12/25 9:56am
I've driven several cars before, and I always refill the air when the tire pressure drops below 220 kPa. A reading of 210 is clearly too low, as the normal tire pressure range for most sedans is between 220 and 250 kPa. Long-term underinflation is particularly damaging to tires, causing significant wear on both sides—I once ruined a tire this way. It also increases fuel consumption by about 0.5 liters per 100 kilometers. Moreover, the car feels unstable when cornering, and emergency braking distances become longer, which is really unsafe. Pay extra attention before driving on highways in summer, as rising tire temperatures will further increase the pressure. Just go to a repair shop to refill the air and have them check for any slow leaks while you're at it.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to open the fuel tank of a Jeep Compass?

The method to open the fuel tank of a Jeep Compass: Lift the metal fuel tank cover, insert the key into the fuel tank cap, turn the key to the right, grip the fuel tank cap's rotating knob and turn it to the left to open the fuel cap, then hang the plastic cord on the cap onto the hook of the metal cover. Generally, the ways to open a fuel tank cap in household cars are limited to using a key, an interior switch, or simply pressing it open. The mechanical key method is more complicated, which is why few household cars use it nowadays. The Jeep Compass has a body size of 4424 mm in length, 1819 mm in width, and 1652 mm in height, with a wheelbase of 2636 mm. The Jeep Compass features front-wheel drive, a front suspension type of MacPherson independent suspension, a rear suspension type of multi-link independent suspension, and a unibody structure.
2
3
Share

What Causes Automatic Wiper Failure?

Automatic wiper failure is typically caused by issues with the rain sensor. Here's an explanation of the related components: 1. System: The rain sensor is an infrared-band optical system consisting of an emitter component that sends out infrared light. When the windshield surface is dry, nearly 100% of the light gets reflected back, allowing the sensor to receive strong reflected signals. The system then interprets this as clear weather and keeps the wipers deactivated. 2. Function: Automatic rain-sensing wipers detect precipitation levels and automatically adjust wiping speed, eliminating manual adjustment. This hands-free operation continuously maintains optimal driver visibility, ensuring safer and more comfortable journeys while enhancing driving comfort and safety.
3
5
Share

What kind of engine oil should be used for Mazda 3 Axela?

This car can use 5W30 or 0W30 engine oil. Here is some relevant information: 1. Axela: The Mazda 3 Axela is a compact car with a very attractive exterior design and a slightly luxurious interior feel. Mazda cars are known for their excellent handling, mainly targeting young people. 2. New model: The 2021 Mazda 3 Axela 2.0L automatic Zhixuan, Zhiya, Zhiyao, Zhirui, and Zizun versions come with 18-inch tires. The original tire brand is Bridgestone, with the tread pattern being TURANZA-T005A.
10
0
Share

What is the Difference Between Antifreeze and Water?

Antifreeze and water differ in their properties: antifreeze has the characteristics of being freeze-resistant and high-temperature resistant, while water has no such properties. The full name of antifreeze is antifreeze coolant, which serves two purposes. First, when the vehicle is not running, it prevents freezing because the antifreeze is inside the engine block. If the liquid turns into a solid, its volume expands, which can crack the engine block. The second purpose is to cool the engine after the vehicle starts, preventing the engine from overheating and causing damage. Antifreeze has a lower freezing point than water, better freeze resistance, a higher boiling point, and superior evaporation resistance compared to water. When the engine is running, it operates at high temperatures. If water were used for cooling, since its boiling point is 100 degrees Celsius, it would evaporate into steam when the temperature reaches 100 degrees. The water level would gradually decrease, and once all the water evaporates, it would no longer be able to cool the engine, leading to engine damage.
16
1
Share

What does 342 on the valve tappet represent?

The number 342 on the valve tappet represents thickness. Here are the relevant details: 1. Hydraulic Tappet: The hydraulic tappet maintains constant contact with the camshaft, operating without any clearance. Inside the tappet, hydraulic pressure is used to adjust the clearance. The hydraulic tappet mainly consists of a plunger, a check valve, and a check valve spring. It stores or releases engine oil through the action of the check valve, and by altering the oil pressure within the tappet chamber, the working length of the hydraulic tappet can be adjusted, thereby automatically regulating the valve clearance. 2. Valve Tappet Cleaning Interval: The cleaning interval depends on various factors, such as the vehicle's driving environment, the control method of the fuel-injected engine, and air quality. Generally, cleaning is required every 20,000 to 30,000 kilometers. If the vehicle operates in a heavily polluted environment (mainly referring to inhalable particulate matter), impurities can quickly accumulate on the throttle body. Over time, this can affect the engine's air intake, necessitating cleaning. This phenomenon is most noticeable when starting the vehicle.
15
1
Share

Is a Rear-Ended and Repaired Car Sturdy?

Rear-ended and repaired cars can be sturdy as long as the craftsmanship is good. Below are the required materials for transferring ownership when buying a used car: 1. Seller's ID: Original and photocopy of the seller's personal ID card. 2. Buyer's ID: Original and photocopy of the buyer's personal ID card. 3. Vehicle documents: Original and photocopy of the vehicle's motor vehicle registration certificate. 4. Driving documents: Original and photocopy of the vehicle's driving license. Below is additional information on issues to be aware of when buying a used car: 1. Underinflated tires: When purchasing a used car, the buyer should walk around the car to check if any of the four tires are underinflated. 2. Tire quality: The buyer should observe whether the tire brands are consistent. 3. Front wheels: The buyer needs to inspect the vehicle's front wheels. 4. Wheel bearings: The buyer should check the used car's wheel bearings. After completing the used car transaction, the buyer should request the seller to promptly provide the relevant documents.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.