Should Fog Lights Be Turned On in the Rain?

2 Answers
PhoebeLee
07/29/25 12:19am
When the rainfall is heavy, you should turn on the headlights or front fog lights. In case of a downpour, the rear fog lights can be activated. For light rain, use the position lights. Precautions for driving in the rain: 1. Slow down: Visibility is low and vision is poor in rainy conditions. The emergency performance of the vehicle, such as braking distance, is also reduced, so it is necessary to slow down in advance, leaving enough time and space to handle situations and ensure safety. 2. Maintain distance: Driving in the rain obstructs vision, so it is important to keep a safe distance between vehicles, constantly observe the distance from the car in front and behind, and increase the safety margin. 3. Do not restart after stalling: In heavy rain or stormy weather, some road sections may become severely waterlogged in a short time. If you must drive through water, do so at a steady speed using a low gear. If the vehicle stalls while moving, never attempt to restart it immediately. Blindly restarting could cause the engine to be irreparably damaged. After the vehicle stalls, contact a professional repair shop promptly. Only after a technician has inspected the vehicle on-site and confirmed there are no issues should you attempt to restart it.
Was this review help?
3
3
Share
DiColton
08/12/25 4:34am
Speaking of whether to turn on fog lights in the rain, with twenty years of driving experience, I have deep insights. When the rain is not heavy, using regular low beams is completely sufficient—just remember to increase the wiper speed and turn on the rearview mirror heating. If the rain is pouring so heavily that you can't see clearly ten meters ahead, then fog lights are a must. Rear fog lights have particularly strong penetration, allowing vehicles behind to spot our position from far away. However, it's worth noting that not all cars come equipped with front fog lights; if yours does, they can provide auxiliary lighting during heavy downpours. Another detail: the drizzly, misty weather during the humid spring season is actually the most dangerous—the combination of fog and rain reflection is most prone to accidents, so fog lights should be turned on promptly in such conditions. The key is to avoid using high beams, as water vapor reflection can create a blinding whiteout.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Is It Normal for Engine Screws to Rust?

It is normal unless they are titanium screws. However, engine screws are unlikely to be made of titanium. Carbon steel screws, stainless steel screws, and copper screws will all rust. If the engine operates in humid conditions, rusting will occur more rapidly. Below is additional information: 1. Impact of Rust: Vehicle screws undergo anti-rust treatment before leaving the factory. However, slight rusting due to exposure to oxygen in the external environment is generally not a concern. Severe rusting requires replacement, as it can compromise the safety rating of the screws and reduce their fastening performance. 2. Reasons for Engine Screw Rusting: Engines contain various types of screws, including hex socket screws, Torx screws, or the most common nuts. Given the harsh working environments engines endure—whether in cold regions or humid, hot climates—external components, particularly exposed screws, are highly susceptible to corrosion.
17
4
Share

What is the principle of hybrid vehicles?

The principle of hybrid vehicles: The car is powered by both the internal combustion engine and the electric motor to drive the vehicle. Hybrid vehicles start with electric power, which is quiet, pollution-free, and fuel-efficient. At low speeds, the engine provides the main driving force, minimizing noise at low RPMs. During full acceleration, both the engine and electric motor work together to deliver rapid and smooth acceleration. When decelerating or braking, energy can be recovered and stored as electricity for reuse. Examples of hybrid models include the Toyota Camry, Honda Accord, Spirior, and BYD Song. Taking the new Toyota Camry as an example, its body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The car body appears very sleek and elegant, with bright silver trim around the windows to enhance the premium feel. The waistline adds a sense of strength to the body, making it look more rugged, and the multi-spoke wheels create a sporty effect.
11
3
Share

How to Pair a Car Remote Control?

Car remote control pairing settings are as follows: 1. Enter the car and close all doors, open the driver's door, insert the key, and turn it on and off five times consecutively. On the fifth time, the hazard lights will flash once. 2. Simultaneously press the lock and unlock buttons on the remote control you wish to pair, repeatedly pressing them several times. The hazard lights will flash, and if they flash twice, it indicates the remote control has been successfully paired. 3. Remove the key and test to ensure both the lock and unlock buttons are functioning properly. Note: When purchasing a car remote control, always choose a legitimate and certified brand to prevent the theft of data information.
9
5
Share

What are the symptoms of a bad engine bearing?

Engine bearing failure exhibits noticeable symptoms such as bearing noise and bearing seizure due to dry friction. The details are as follows: Noticeable bearing noise: During cold starts under heavy load, the engine oil, being viscous at low temperatures, fails to lubricate the bearings in time. Meanwhile, the bearing surface reaches an instant high temperature due to the heavy load, causing metal fusion and seizure. Over time, as normal wear increases, the bearing clearance expands, leading to noticeable bearing noise. This results in oil loss and pressure drop, insufficient oil supply between bearings, high temperatures, and eventual fusion and seizure. Bearing seizure due to dry friction: Lack of coolant or prolonged high-temperature driving causes the engine oil temperature to rise rapidly, losing its viscosity. This prevents the formation of a protective oil film between the shaft and bearing, leading to severe friction, fusion, and seizure. Reduced oil pump pressure makes it difficult for the oil to reach designated lubrication points at standard pressure. Clogged oil screens or passages by contaminants block oil flow to the crankshaft, and oil leaks in the pipeline reduce lubrication system pressure, resulting in bearing seizure due to dry friction.
8
5
Share

What are the effects of turning on the air conditioning without starting the car?

Turning on the air conditioning after starting the engine has almost no impact on the car, but it is not advisable to let the engine idle for extended periods, as this can lead to increased carbon deposits in the engine. Carbon deposits are formed when the combustible air-fuel mixture in the engine does not burn completely, and they can cause significant harm to the engine. 1. Turning on the car's air conditioning: This generally refers to using the cooling function in summer. When the cooling function is activated, the engine control unit increases the engine speed by about 100 RPM. This increases the engine's air intake, which in turn increases fuel injection, resulting in a richer air-fuel mixture. A richer mixture can lead to incomplete combustion of gasoline. Prolonged idling with the air conditioning on can cause an increase in carbon deposits, making the engine less fuel-efficient. 2. Additional information: After turning on the air conditioning, the engine works to reduce the heat from the air conditioning condenser, causing the cooling fan to operate continuously. If there are issues with the cooling or heat dissipation systems, it can lead to high engine coolant temperatures, which may adversely affect the engine. Prolonged idling with the air conditioning on in poorly ventilated areas or garages can also pose a risk of carbon monoxide poisoning for occupants inside the car.
10
1
Share

What causes air leakage at one corner of the screw on the three-way catalytic converter gasket?

Air leakage at one corner of the screw on the three-way catalytic converter gasket may be caused by the screw not being tightened properly or the screw being damaged. Below is relevant information about the automotive three-way catalytic converter: 1. Working principle: When high-temperature exhaust gases pass through the purification device, the purifying agent in the three-way catalytic converter enhances the activity of CO, HC, and NOx gases, promoting certain oxidation-reduction chemical reactions. CO oxidizes into colorless, non-toxic carbon dioxide gas at high temperatures; HC compounds oxidize into water (H2O) and carbon dioxide; NOx reduces into nitrogen and oxygen. 2. Consequences of damage: If the three-way catalytic converter is damaged, the secondary oxygen sensor on it will not be able to correctly provide data to the engine control unit, leading to either excessively lean or rich air-fuel mixture. A lean mixture can cause ignition difficulties, lack of power, engine backfiring, etc., while a rich mixture can increase fuel consumption, incomplete combustion, severe carbon deposits in the cylinders and spark plugs, etc. The engine fault light should illuminate when such faults occur.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.