···
Log in / Register

Should Dunlop Tires Be Replaced After 6 Years?

1 Answers
RoseFitz
09/08/25 6:41am
Tires that have been used for 6 years may or may not need replacement, depending on the specific situation. Circumstances that require tire replacement include: 1. Check the tire wear indicators: Regardless of the tire brand, wear indicator marks are set in the tread grooves. 2. Bulging occurs: Bulging on the tread indicates local rubber deterioration or uneven pressure. At this time, the tire may explode at any time, and continuing to drive is very dangerous, so it should be replaced in time. 3. Tread aging and cracking: If this phenomenon occurs on the tire, it means that the aging is very serious, and dense cracks will appear around the tread and wheel hub.
Was this review help?
3
3
Share
More Forum Discussions

Should You Press the Clutch When Turning Off a Manual Transmission Car?

When stopping and turning off the engine, you need to press the clutch, which can be divided into the following two situations: 1. First situation: When the speed is relatively high, brake first and then press the clutch. The brake pedal braking is equivalent to both the braking system and the engine braking system working simultaneously. When the engine speed drops to idle, press the clutch to downshift. The purpose of this is to prevent the engine from stalling. Pressing the clutch is equivalent to separating the engine from the transmission system, which is like coasting in neutral. The car slows down due to inertia, and in high-speed driving, it cannot achieve rapid deceleration. 2. Second situation: When the speed is relatively slow, you can directly press the clutch. If the speed is slow, such as in 1st or 2nd gear, you can directly press the clutch to apply braking.
1
5
Share

How to Take the Full Score Exam After Accumulating 12 Points?

After a driver has accumulated 12 penalty points, they need to take the subject one exam at the vehicle management office of the Traffic Police Brigade of the Municipal Public Security Bureau with their "Training Completion Certificate." The registration and examination procedures are exactly the same as when they first entered the examination room. Additional information: 1. Legal basis: Article 47 states that if a motor vehicle driver accumulates 12 penalty points within one scoring cycle, they must report to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the violation occurred within 15 days to receive seven days of education on road traffic safety laws, regulations, and related knowledge. After completing the education, the vehicle management office must administer the subject one exam within 20 days. 2. Purpose: Accumulating 12 points in one cycle means the driver loses their driving qualification and must undergo no less than seven days of traffic safety education. Only after passing the exam can they regain their driving qualification. The scoring system serves to enforce compliance with traffic safety laws, thereby reducing the incidence of traffic accidents. However, in practice, the penalty scoring system has lost its seriousness and standardization, making it merely a formality.
14
5
Share

Can You Still Take the Test After Using Up All Five Attempts for Subject One?

Subject One can be taken continuously even after failing five times. Failing Subject One means not obtaining the driving skill test permit, which is equivalent to not having successfully applied, so you can keep applying until you pass. Here is relevant information about the number of attempts for the driver's license test: The number of scheduled test attempts for Subject Two and Subject Three (road driving skills test) must not exceed five. Each subject test allows one attempt, and if failed, a retake is permitted. If you do not attend the retake or fail the retake, the current test session ends, and the applicant must schedule a new test. However, Subject Two and Subject Three tests can only be rescheduled after ten days. In other words, Subject Two and Subject Three each have five retake opportunities, while Subject One and Subject Four (the theoretical test for Subject Three) have no limit on the number of attempts.
14
2
Share

Can Alcohol Ether Fuel Vehicles Be Used Long-Term?

They can be used long-term. Alcohol ether gasoline performs just as well as regular gasoline, with negligible differences in fuel consumption. Using this type of gasoline also contributes to environmental protection. Characteristics of alcohol ether gasoline: 1. High Octane Number: It has a high octane rating, with RON reaching up to 112, equivalent to 112-octane gasoline, and features high latent heat of vaporization. 2. Superior Performance: It offers better fuel and mechanical performance, with strong explosive power, meeting and enhancing the engine's thermal efficiency and power output. 3. Clean and Eco-Friendly: Alcohol ether molecules contain oxygen that aids combustion. Methanol has a small molecular weight with only one carbon atom, and oxygen content is as high as 50%, ensuring complete and rapid combustion. It supports lean combustion with high efficiency, primarily producing H2O and CO2 after combustion. It requires less air during combustion, resulting in reduced intake of inert nitrogen and significantly lower nitrogen oxide emissions compared to gasoline and diesel.
1
4
Share

Where is the engine number located on the Santana Zhijun?

The engine number of the Volkswagen Santana Zhijun is located on the engine cylinder block. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked in the following 4 ways: The vehicle license shows the engine number, generally located on the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is different.
17
4
Share

What is the pedal on the far right of a car?

The far right pedal is the accelerator pedal, also known as the throttle pedal, used to control the vehicle's speed. It regulates the amount of air entering the engine cylinders. Pressing the accelerator increases engine speed and power, while releasing it reduces engine speed and power. The far left pedal is the clutch pedal, exclusive to manual transmissions. The weight and height of the clutch pedal vary between different car models, which results in different driving characteristics. Most modern clutches use hydraulic assistance. If air enters this hydraulic system, it can cause issues like incomplete clutch disengagement and difficulty shifting gears, which translates to a soft, spongy clutch pedal with a feeling of emptiness when pressed. The middle pedal is the brake pedal, whose function is to slow down or stop the vehicle. Brake sensitivity and pedal travel differ across car models, depending on the manufacturer's tuning.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.