Should BMW X3 use 0W30 or 0W40 engine oil?

What Are the Effects of Car Glazing?

Car glazing has the following effects: Erosion of Car Paint: Since glaze is a petroleum product with certain erosive properties, after a vehicle undergoes glazing treatment, other beauty treatments cannot be used to protect the paint surface, and only glazing can be continuously used. After car glazing, if painting is performed, it is easy for the paint to peel off. Detailed Introduction to Glazing: Glazing involves covering the car's paint surface with a layer of glaze. The main component of glaze is derived from petroleum. By using the high-speed vibration and friction of a polishing machine, the glaze penetrates into the car paint, forming a protective layer that effectively safeguards the paint. Benefits of Glazing: The non-stick property of glaze makes the paint surface less prone to contamination, keeping it clean. After car glazing, the glaze layer can increase the hardness and brightness of the paint surface, effectively protecting it from minor scratches. It also provides some resistance to temperature effects on the car paint, along with anti-UV, anti-acid rain, anti-oxidation, anti-static, anti-corrosion, and water-resistant properties. It effectively reduces the roughness of the car paint surface, minimizes friction with the external environment, and better protects the paint surface.

19

0

Share

Why is there no air from the rear air conditioning?

The main reason for no air from the rear air conditioning is usually due to air leakage at the connection between the evaporator housing and the air duct. Air leakage at the connection between the evaporator housing and the air duct: If there is air leakage at the connection between the evaporator housing and the air duct, the cold air that should be released from the rear air conditioning vents will continuously leak from the gap, resulting in reduced airflow from the rear air conditioning vents. Issues with the cabin air filter: The cabin air filter is located at the air intake of the blower. All cold or hot air blown out by the car's air conditioning system must pass through the cabin air filter. However, the cabin air filter is prone to accumulating dirt. If the owner fails to replace the cabin air filter in time, it can easily become clogged with dust, leaves, dead insects, or even rodent remains. These obstructions naturally reduce the airflow passing through the cabin air filter, leading to decreased airflow from the rear air conditioning vents. Deterioration of the additional air duct seal: The rear air conditioning vents are connected to the blower via an additional air duct. If the seal of this additional air duct deteriorates, air leakage will occur, reducing the airflow from the rear air conditioning vents.

13

2

Share

What is the Difference Between Pre-installed and Aftermarket Automotive Equipment?

Pre-installed refers to the wireless charging device that comes with the car before it leaves the factory, usually located in the central storage box or armrest compartment. Simply place your phone on the charging device to charge. Aftermarket, on the other hand, involves adding an additional device like a car mount to achieve wireless charging. The installation position is not fixed and can be placed on the air vent, car dashboard, or attached to the windshield using a suction cup. Wireless Technology: Pre-installed automotive wireless charging technology comes from wireless charging solution providers who supply solutions to car manufacturers. As a qualified pre-installed wireless charger, having wireless charging certification is just the foundation. It must also meet stringent automotive-grade hardware standards, with specific requirements for operating temperature range, waterproofing, dustproofing, etc. Certifications: This includes a series of strict requirements such as the E-Mark certification for the automotive industry, IATF16949 factory system, EMC certification, etc. These standards are often rigorous, costly, and time-consuming, which is why there are few wireless charging manufacturers capable of entering the pre-installed market due to unmet certification requirements.

13

2

Share

Can a Sedan Be Parked for a Year?

A sedan can be parked for a year, but it is best not to leave it parked for extended periods without regular maintenance. Regular Ignition: During long-term parking, continuous battery discharge can easily lead to battery depletion. In mild cases, it may affect the next vehicle startup, while in severe cases, it can directly cause battery damage—each instance of excessive discharge causes irreversible harm to the battery. While parked, you don’t need to move the car, but it’s advisable to start the vehicle every few days and let it idle for about ten minutes. This allows the engine to be fully lubricated by the oil and also helps recharge the battery, preventing excessive discharge. Rubber Maintenance: To avoid premature aging of rubber materials, proper care should be taken for tires and other rubber seals during parking. Available tire protection wax can provide excellent protection and moisturizing effects for rubber materials. Prevent Moisture: For cars parked long-term, metal surfaces should be kept clean. The parking garage should be well-ventilated, maintaining relative humidity below 70%. Dust, dirt, and moisture on the car should be promptly removed. Rust-prone areas and mechanical parts should be coated with oil or grease or wrapped with oil paper. Openings in assemblies should be sealed to prevent air, moisture, and dust from entering. Cabin humidity must also be controlled to avoid mold growth on internal components after long-term parking. Special dehumidifiers can be used to regulate cabin humidity, or a simple alternative is to place old newspapers inside the car, as they can absorb moisture.

1

4

Share

When to Use the Optimal 21-Speed Gear Adjustment on Flat Roads?

Here are several scenarios for 21-speed gear adjustment on flat roads: 1. Low gear, suitable for starting, riding against the wind, or climbing hills: Use the smallest chainring paired with the largest 3 cogs on the cassette. Avoid pairing the smallest chainring with the smallest 4 cogs, as this will reduce the lifespan of the chain, chainring, and cassette. 2. Normal riding gear, suitable for daily flat road riding: Use the middle chainring paired with the middle 3 cogs. Avoid pairing the middle chainring with the smallest 2 cogs or the largest 2 cogs, as this will reduce the lifespan of the chain, chainring, and cassette. 3. High gear, suitable for riding with the wind or downhill: Use the largest chainring paired with the smallest 3 cogs. Avoid pairing the largest chainring with the largest 4 cogs, as this will reduce the lifespan of the chain, chainring, and cassette. Additional information: 1. Gear system: A 21-speed bike refers to a gear system with 3 chainrings and 7 different-speed cogs on the cassette. 2. Gear shifting: It is commonly believed that 3X7=21, hence the term 21-speed gear system. However, in practice, you cannot use all 24 speeds because the correct method is: if the front is in 1st gear (chain on the smallest chainring), it is best to pair it with 1-2-3 gears at the rear (where the chain on the largest cog is 1st gear, followed by 2,3,4,5,6,7 gears).

14

2

Share

How far can a Nissan Sylphy go after the fuel gauge light comes on?

Sylphy can still drive about 50km after the fuel gauge light comes on under normal driving conditions. Driving precautions are as follows: Don't wait for the yellow light to refuel: Before driving, the owner should check the fuel gauge and calculate whether to refuel during the trip based on the distance of the trip and the scale of the fuel gauge. The owner can refuel in advance and don't wait for the fuel light to come on before refueling. The fuel pump is located in the fuel tank, and the temperature of the fuel pump is relatively high when it works continuously. Immersed in fuel, it can effectively cool down. When the fuel light is on, it means that the fuel level is lower than the fuel pump. If you wait for the light to come on before refueling every time, it will shorten the service life of the fuel pump. Too little fuel in the tank may also burn out the fuel pump. Choose to refuel in the morning or evening: There are tricks to the refueling time. Generally, the temperature in the morning and evening is relatively low, and the vaporization point of gasoline is also relatively low, so refueling should be chosen in the morning or evening. Gasoline has the property of thermal expansion and contraction, and gasoline is charged by volume. When the temperature is low, the density of gasoline is relatively high, the mass per unit volume is also relatively larger, and more gasoline can be added. It is not advisable to fill up the fuel tank when driving in the city: Because driving in the city is always stop-and-go, if the fuel tank is full, it will increase the load on the engine and increase fuel consumption. Refueling in the city is very convenient, and gas stations can be easily found, so there is no need to fill up the tank.

12

0

Share

Should BMW X3 use 0W30 or 0W40 engine oil?

What Are the Effects of Car Glazing?

Why is there no air from the rear air conditioning?

What is the Difference Between Pre-installed and Aftermarket Automotive Equipment?

Can a Sedan Be Parked for a Year?

When to Use the Optimal 21-Speed Gear Adjustment on Flat Roads?

How far can a Nissan Sylphy go after the fuel gauge light comes on?

What does automotive BMS mean?

What are the reasons for difficulty in starting a gasoline engine?

Is it worth buying a used smartforfour?

Must the clutch be fully depressed when shifting gears?