Should Antifreeze Be Added in Summer?

2 Answers
JulietRose
07/28/25 3:31pm
Antifreeze should be added in summer. During summer, the engine operates at high temperatures, with normal working temperature limits often exceeding 100°C. Water boils at 100°C and is corrosive, which can lead to scale formation and affect cooling efficiency. Therefore, antifreeze is used to cool the engine. High-quality antifreeze coolant typically has a boiling point above 110°C, making it less likely to boil over in summer compared to water. The full name of antifreeze is antifreeze coolant, meaning it is a coolant with antifreeze properties. It is a specially formulated coolant containing additives, primarily used in liquid-cooled engine cooling systems. It provides functions such as preventing freezing in winter, boiling over in summer, and protecting against scale and corrosion throughout the year.
Was this review help?
14
3
Share
DePresley
08/11/25 10:56pm
I've been driving for so many years, and I always add antifreeze in summer because it's not just for preventing freezing—it also keeps the engine from overheating and boiling in high temperatures. The engine operates at a high temperature, and the cooling system relies on coolant circulation. Without enough coolant or if the level is too low, it can easily lead to overheating or even cylinder head damage, which can be costly to repair. I recommend checking the coolant level in the radiator when the engine is cold to ensure it's between the MIN and MAX marks. If it's low, top it up with a professional antifreeze mixed with distilled water, and avoid using tap water to prevent scale buildup. This small habit saves hassle and money while extending your vehicle's lifespan.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

What Causes Car Abnormal Noises?

Car abnormal noises are warning sounds indicating potential vehicle issues. Below are several common scenarios and solutions for car abnormal noises: 1. Body Noise: This issue is usually caused by insufficient body rigidity, leading to deformation during driving, friction or vibration between doors and frames, or friction between steel plates due to welding failures. Applying adhesive strips on windows/doors or padding rubber at friction points may alleviate or eliminate the noise temporarily, but it doesn't address the root cause. Loose body components can also cause noises, which can typically be resolved by tightening screws. 2. Engine Compartment Noise: There are multiple possible causes here. A sharp belt squeal usually indicates belt slippage. Metallic friction sounds during engine operation often suggest damaged bearings in the generator, water pump, or power steering pump. Hissing sounds may point to exhaust system blockage or vacuum tube leakage/breakage. Note: Most internal engine noises require professional repair at a service center. 3. Transmission Noise: If a 'sandy' sound occurs during driving that disappears when depressing the clutch, this indicates transmission issues, possibly caused by worn bearings/gears or bearing pitting.
8
0
Share

Does the steering wheel automatically return to center?

Automobile steering wheels have an automatic return-to-center function. In fact, the professional term for steering wheel return is called the steering wheel's stabilizing effect. Specifically, when a car is driving in a straight line and its original path is forcibly altered by an external force, the steering wheel will naturally regain its ability to maintain straight-line driving. To achieve the steering wheel's stabilizing effect, three core components are essential: the steering wheel, kingpin, and front axle. The installation of these three core components follows certain rules, defined by parameters such as the kingpin caster angle, kingpin inclination angle, and front wheel camber angle. The kingpin inclination angle refers to the angle between the kingpin axis and the tire diameter perpendicular to the ground. Most vehicles are set with a positive value when leaving the factory. The angle between the kingpin axis and the vertical line is the kingpin caster angle. When the steering wheel is turned, the tire rotates around the kingpin as the center. The ground's reaction force on the tire lifts the front of the car, and under the car's own gravity, the wheels return to a position parallel to the direction of travel, making it easier for the steering wheel to return to center.
3
2
Share

What Are the Essential Car Accessories for Road Trips?

Here is an introduction to the essential car accessories for road trips: 1. Car Air Pump: Easy to connect, powerful motor, mini and portable, simple to operate. During road trips, you need to conquer various road conditions, and the correct tire pressure is crucial for safety. Excessive tire pressure can lead to the risk of a blowout, while insufficient tire pressure can wear out both sides, shortening tire life and threatening safety and health. 2. Car Phone Holder: Sturdy and stable, adjustable at multiple angles, convenient for charging. Navigation is indispensable when traveling, and car navigation systems often suffer from outdated updates leading to route deviations. Therefore, mobile navigation becomes the live map during road trips. For long-distance use, the convenience of charging is also an important factor. Having a reserved charging port or built-in wireless charging can make driving during road trips more convenient. 3. Dash Cam: High-definition video quality, wide field of view, parking lot monitoring. Fleeting scenery often isn't enough to just see with your eyes, and a dash cam with high-definition video quality and a wide field of view can help record it all. Not only that, but it can also help avoid the danger of being scammed while traveling, detect the surrounding environment, and make the road trip more comfortable. With parking monitoring functionality, it can also ensure parking safety.
5
0
Share

Where is the rear crankshaft oil seal located?

The rear crankshaft oil seal is located at the middle wheel under the engine. Here is some relevant information about the crankshaft: 1. Concept: The crankshaft is the most important component in an engine. It receives the force transmitted from the connecting rod and converts it into torque, which is then output through the crankshaft to drive other engine accessories. The crankshaft is subjected to the combined effects of centrifugal force from rotating masses, periodically varying gas inertial forces, and reciprocating inertial forces, causing it to bear bending and torsional loads. 2. Requirements: The crankshaft must have sufficient strength and stiffness, with journal surfaces that are wear-resistant, operate uniformly, and have good balance.
15
1
Share

Should a section be left uncovered for rearview mirrors when applying car window film?

It is necessary to leave a section uncovered for rearview mirrors when applying car window film. Below are relevant details about window film application: 1. Precautions for film application: When applying film, it is essential to choose high-quality film and have it installed by professional technicians. Inferior films may not meet light transmittance standards, which can impair the driver's visibility during nighttime driving. It is not advisable to apply film on the front windshield as it may obstruct the driver's view. When applying film to the driver and front passenger side windows, two sections should be cut out to ensure the driver has a clear view of the side rearview mirrors. After the film is applied, avoid rolling the windows up or down as this may cause the film to peel off. 2. Film lifespan: Generally, car window film can last about three years. After removing the film, residual adhesive may remain on the glass. Before attempting to remove the adhesive, it is important to soften it first to facilitate removal. If the adhesive is not softened and scraped off directly, it may leave scratches on the glass. After softening the adhesive with alcohol or essential balm, use a plastic scraper to remove it, avoiding hard metal tools that could scratch the glass.
1
4
Share

Why does the car air conditioning not cool when the car is not running?

When the car is not running, the air conditioning does not cool because moisture has entered the refrigeration system, leading to insufficient cooling or no cooling at all. Below is an introduction to automotive air conditioning: 1. Introduction to Automotive Air Conditioning: The automotive air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. It is used to regulate the temperature and humidity inside the car, providing a comfortable environment for the driver. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy and turn into a liquid. When the liquid refrigerant flows through the throttle device, its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator, causing it to evaporate and turn into a gas. The gas is then drawn back into the compressor for the next cycle.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.