Should an Automatic Car Be Started in P Gear or N Gear?

Reasons for Cracks on Tire Sidewalls?

Tire sidewall cracks can occur due to the following reasons: 1. Natural aging. During prolonged use, exposure to wind and sunlight causes rubber to naturally age, leading to cracks—this is a normal phenomenon. Generally, tires on vehicles over 5 years old will develop cracks, which do not affect normal usage. However, if the cracks are dense or reveal the inner tire, immediate replacement is necessary to prevent safety hazards. 2. Impact damage. When driving frequently on uneven or gravel roads, tires are inevitably subjected to impacts, which is also normal. Minor impacts do not hinder normal use, but severe impacts can reduce tire lifespan, requiring timely replacement.

12

3

Share

How to Reset the Car Maintenance Reminder?

Method one to reset the car maintenance reminder: 1. Turn off the ignition switch. 2. Turn on the ignition switch while holding down the odometer hour reset button. After ignition, the reminder message will still be displayed. 3. Within 30 seconds, press and hold the odometer hour reset button for about 3 seconds, and the reminder message will be completely reset. 4. Within 30 seconds, press and hold the odometer hour reset button for about 3 seconds, and the reminder message will be completely reset. Method two to reset the car maintenance reminder: 1. Turn off the ignition switch. 2. Press the clock adjustment button "SET" while turning on the ignition switch. 3. Release the "SET" button, then press the "SET" button once more. 4. Turn off the ignition switch, then turn it on again to see if it has been reset. If not, you must start from the beginning and repeat the process several times.

20

3

Share

What lights to turn on when temporarily parking on the roadside?

When temporarily parking on the roadside, turn on the right turn signal. Here is more information about the use of turn signals: 1. When overtaking, first turn on the left turn signal, then the right turn signal after overtaking. 2. When entering the highway, turn on the left signal. When exiting the highway, always turn right. No need to turn on the signal when entering a roundabout, but turn on the right turn signal when exiting the roundabout. 3. Generally, when making a U-turn, turn left, so turn on the left turn signal. When changing lanes to the left, turn on the left turn signal, and when changing lanes to the right, turn on the right turn signal. 4. When preparing to turn, turn on the signal in advance to give the driver behind you a reaction time.

15

0

Share

What does 'how much oil does the car burn' mean?

Several oils refer to several liters of oil, for example, 10 oils refer to 10 liters of oil, which is the average fuel consumption per 100 kilometers, and the lower the better. More information about fuel consumption per 100 kilometers is as follows: 1. The actual method to calculate fuel consumption per 100 kilometers: X/100=50/600, where X is the actual fuel consumption per 100 kilometers sought, and the right side of the equation is the fuel consumption of 50L for the vehicle traveling 600 kilometers. 2. Fuel consumption per 100 kilometers is an indicator of the vehicle, and working condition fuel consumption is a standardized statistical norm. The slower the vehicle travels within the economical speed range, the more fuel consumption per 100 kilometers, and the opposite is true when exceeding the economical speed.

12

5

Share

What does ECO mean in a car?

ECO refers to the car's economical driving mode. ECO is an English abbreviation formed by combining Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the ECO indicator light on the dashboard illuminates, it means the vehicle's economical mode has been activated. ECO mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active ECO mode does not have a dedicated button. When the dashboard ECO indicator light illuminates, it merely serves as a reminder function. The ECO system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most cars employ the active ECO driving mode, meaning they have their own switch button. Therefore, during daily driving, we can activate the ECO mode. Additionally, the ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car will prioritize speed, causing the ECO mode to automatically deactivate. When idling in park or in N/P gear, as well as in manual mode, the ECO mode may also become ineffective. When high torque output is required, such as when climbing a slope, the engine's computer will prioritize ensuring sufficient power to drive the vehicle, and the ECO mode will likewise not operate.

20

4

Share

What are the differences between rear-wheel drive and front-wheel drive vehicles?

Here are the main differences between rear-wheel drive and front-wheel drive vehicles: 1. Different characteristics: Front-wheel drive is commonly found in economical models, featuring low cost, high transmission efficiency, and low fuel consumption; while rear-wheel drive is usually seen in sporty mid-to-high-end models, known for superior handling, excellent acceleration performance, and relatively higher fuel consumption. 2. Different engine placement methods: Rear-wheel drive vehicles mostly adopt a longitudinal engine layout, which occupies more space and significantly reduces rear passenger space; front-wheel drive vehicles use a transverse engine layout, freeing up more space, and the absence of a protruding driveshaft in the cabin noticeably improves rear passenger comfort. 3. Different handling: Front-wheel drive vehicles require the front wheels to handle both steering and driving, placing a greater burden on them, which can lead to understeer during sharp turns or even difficulty in turning; whereas rear-wheel drive vehicles, due to the heavier rear axle and greater inertia, are more prone to oversteer.

11

4

Share

Should an Automatic Car Be Started in P Gear or N Gear?

Reasons for Cracks on Tire Sidewalls?

How to Reset the Car Maintenance Reminder?

What lights to turn on when temporarily parking on the roadside?

What does 'how much oil does the car burn' mean?

What does ECO mean in a car?

What are the differences between rear-wheel drive and front-wheel drive vehicles?

What is the general lifespan of a turbocharger?

At what voltage does a car battery fail to start the vehicle?

Why does the car engine suddenly become louder?

How to Apply for Temporary License Plates for a New Car?