Should a scooter use 92 or 95 octane gasoline?

1 Answers
StJune
07/29/25 11:35pm
Scooters should use 92 octane gasoline. The following are the differences between 92 octane and 95 octane gasoline: 1. Different anti-knock properties: 92 octane gasoline has relatively poor anti-knock properties, requiring the ignition timing to be delayed, which leads to faster fuel consumption. In contrast, 95 octane gasoline has stronger anti-knock properties, resulting in slower fuel consumption. 2. Different prices: 92 octane gasoline is slightly cheaper than 95 octane gasoline. 3. Different octane ratings: 92 octane gasoline has an octane rating of 92 and contains 8% n-heptane, making it suitable for mid-range vehicles. 95 octane gasoline contains 95% isooctane and 3% n-heptane, making it suitable for high-end vehicles.
Was this review help?
10
5
Share
More Forum Discussions

How to Solve the Problem of Brake Locking and Engine Not Starting?

It may be due to a dead battery caused by leaving the headlights on for a long time or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Check if there is fuel. If the fuel gauge shows below the red line, the engine naturally won't start. Also, pay attention to the quality of the fuel. Some car owners add water or low-quality antifreeze, which can cause the entire cooling system to freeze in extremely cold winter conditions, leading to the engine cracking. When starting an automatic transmission car, the gear must be in the P (Park) or N (Neutral) position. If it is in R (Reverse) or D (Drive), the engine will not start.
11
3
Share

How to deal with the lack of navigation in the new xrv?

The new xrv requires replacing the vehicle's central control head unit system to use the navigation function. Since all models of the new xrv are equipped with a reverse camera system, the replacement central control head unit system must support the reverse camera to ensure a seamless connection and normal use of the reverse camera. Here are some details about the new xrv: 1. The new xrv is a five-door, five-seat SUV with a fuel tank capacity of 50 liters. 2. The vehicle's body dimensions are: length 4328 mm, width 1772 mm, height 1610 mm, and a wheelbase of 2610 mm. 3. The front track is 1535 mm, the rear track is 1540 mm, and the minimum ground clearance is 130 mm.
9
3
Share

How to Defog Windows While Driving in Rainy Days?

Here are the methods to defog windows while driving in rainy days: 1. Turn on the window defogging mode. 2. Open windows for convection to equalize indoor and outdoor temperatures. 3. Spray defogging agent on the glass. 4. Use the car's warm or cold air to blow on the windows. Here are the precautions for driving in rainy days: 1. Maintain a sufficient safe distance. 2. Use lights correctly. 3. Avoid slamming the brakes, stepping hard on the accelerator, or turning the steering wheel abruptly. Here is some relevant information: Car glass is manufactured by heating the glass in a furnace to near softening temperature, then sending it into fans with varying cooling intensities for uneven cooling, creating different stresses between the main viewing area and the peripheral area of the glass. This produces zone-tempered glass.
9
1
Share

In which year was the Magotan B6 produced?

Magotan B6 is a 2007 model, belonging to the first generation of Magotan in the domestic market. The Magotan B6 was produced using the PQ46 platform, which was then utilized for mid-to-high-end vehicles, making it the first in its class to adopt globally synchronized advanced chassis technology. The widely recognized DSG dual-clutch transmission also began to gain popularity starting with the Magotan B6 model. The Volkswagen Magotan originates from the Future B6, which is closely related to the Passat B6, and it was the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. FAW-Volkswagen Automotive Co., Ltd. (referred to as FAW-Volkswagen) was established on February 6, 1991. It is a large passenger vehicle manufacturing enterprise jointly operated by China FAW Group Corporation, Volkswagen AG, Audi AG, and Volkswagen (China) Investment Co., Ltd. The common models under FAW-Volkswagen mainly include Magotan, Sagitar, Golf, Lavida, POLO, Touran, Tiguan, Passat New Lingyu, etc. The body dimensions of the Magotan B6 are: 4765mm*1820mm*1472mm, with a wheelbase of 2709mm. In terms of power, the Magotan B6 is equipped with 1.8L and 2.0L naturally aspirated engines. The 1.8L engine has a maximum power of 118KW and a maximum torque of 250Nm. The 2.0L engine has a maximum power of 85KW and a maximum torque of 170Nm. The transmission is a 5MT manual transmission.
18
2
Share

What does the 10th digit of a car's VIN represent?

The 10th digit of a car's VIN represents the production year, which could be either a number or a letter. Here are the details: 1. A car's VIN, also known as the Vehicle Identification Number, consists of 17 digits. The letters I, O, Q, Z, and U are not used. It serves as the car's unique identifier. 2. Generally, the VIN can be found on the car's frame, engine, vehicle certification, and insurance documents. 3. For production countries: 1 and 4 represent the United States, 2 represents Canada, 3 represents Mexico, 6 represents Australia, 9 represents Brazil, J represents Japan, K represents Korea, L represents China, S represents the United Kingdom, T represents Switzerland, W represents Germany, Y represents Athens, and Z represents Italy.
4
4
Share

Is a manual transmission driver's license C1 or C2?

Manual transmission driver's license is coded as C1. A C1 license permits driving small and micro passenger vehicles, as well as light and micro cargo vehicles, and light, small, micro special operation vehicles. For the above vehicle types, drivers holding a C1 license can operate both manual and automatic transmission vehicles. Here is some relevant information: 1. Compared to manual transmissions, automatic transmissions are generally more expensive. It is understood that manual transmissions have a relatively simple structure, making them easier and cheaper to manufacture and maintain; automatic transmissions have a more complex structure, resulting in higher manufacturing costs and greater difficulty and expense in maintenance. 2. In practical use, because automatic transmissions involve less manual operation, they are less prone to failure. Generally, automatic transmissions only require regular replacement of transmission fluid; whereas manual transmissions, in addition to regular transmission fluid changes, also require clutch plate replacements based on wear and tear. Therefore, over a longer period, the frequency and cost of maintenance for manual transmissions are not necessarily lower.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.