Should a Right-Turning Vehicle Yield to a Left-Turning Vehicle?

1 Answers
SanMarcus
07/30/25 1:07am
In the case of oncoming traffic, the right-turning vehicle should yield to the left-turning vehicle. Situations where right-turning vehicles yield to left-turning vehicles: Right turns and left turns are relative to oncoming vehicles. One vehicle turns right, while another turns left, both entering the same intersection. In this scenario, the right-turning vehicle must yield to the left-turning vehicle. Since the left-turning vehicle has a longer travel path, if the right-turning vehicle does not yield, the left-turning vehicle would have to remain stopped in the middle of the intersection for an extended period, disrupting normal traffic flow. If a collision occurs due to the right-turning vehicle failing to yield, the right-turning vehicle bears full responsibility for the accident. Situations where left-turning vehicles yield to right-turning vehicles: The "yield to the right" principle applies under one condition: at intersections without traffic lights, when two vehicles are traveling straight from crossing directions. In such cases, the "yield to the right" principle is enforced. This means that when two vehicles approach an intersection simultaneously, the vehicle on the left must yield to the vehicle on the right. This is because the driver's position in domestic vehicles is on the left side.
Was this review help?
5
3
Share
More Forum Discussions

What Causes BMW Brake Failure?

The reasons for BMW brake failure are as follows: 1. Abnormal wear of brake discs and pads: For example, when brake discs and pads are worn to their limits, they should be inspected during every maintenance service. 2. Deterioration of brake fluid: Brake fluid has strong water absorption properties. If not replaced for a long time, it can easily produce air bubbles, affecting braking performance. Brake fluid should be replaced regularly. 3. Brake system oil leakage: If brake fluid leaks severely, braking will be impossible. It is crucial to pay attention to brake system warnings. After the brake system warning light comes on, promptly stop to check the brake fluid level and inspect components such as brake lines and the master/slave cylinders. 4. Air in the brake system: The presence of air in the brake system will significantly increase braking distance. This is a relatively common issue and requires bleeding the brake system at a service station. 5. Damage to components such as the brake master cylinder or slave cylinders: Replace the relevant parts. 6. Obstruction under the brake pedal: For example, a plastic bottle or an ill-fitting floor mat may block the pedal. Adjust promptly.
5
3
Share

What does the STOP display on the car mean?

Meaning of STOP: It is a mandatory stop warning light. When illuminated, the engine must be stopped. The STOP light is not a standalone light. There are also other indicator lights on the dashboard such as water temperature, oil pressure, air pressure, engine, and cabin. When a component malfunctions, the STOP light will illuminate. More detailed explanations are as follows: 1. If the engine water temperature is too high while driving, the water temperature warning light will come on, and the STOP light will also illuminate, indicating an engine fault. There is also a yellow light on the dashboard; the STOP light is red, with yellow indicating a general fault and red indicating a serious fault. Different cars have different dashboards. However, conventional car dashboards generally include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. 2. Modern car dashboards feature various indicator or warning lights beneath the panel, such as coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, anti-lock braking system (ABS) indicator, traction control indicator, and airbag (SRS) warning light.
6
3
Share

Will Frequent Switching of Car Air Conditioning Damage It?

Frequent switching of the air conditioning can potentially damage it. Here are some precautions for using car air conditioning: 1. When starting/shutting down the vehicle: The timing of turning on the air conditioning; when the engine is off, the air conditioning accumulates a large amount of moisture inside during cooling. If the engine is turned off directly, this moisture remains trapped inside the air conditioning system, which can lead to mold and bacterial growth over time. The correct practice is to turn on the air conditioning only after the vehicle has started and to turn off the air conditioning compressor 2-3 minutes before shutting down the engine. 2. Pointing the vents upward provides the best cooling effect: Adjusting the vent direction randomly can affect the cooling efficiency. Based on the principle that cold air sinks and hot air rises, adjusting the vents upward in cooling mode achieves the optimal cooling effect. 3. Keeping the air conditioning at the lowest temperature for long periods is not advisable: The significant temperature difference between the inside and outside of the car can easily cause colds or even air conditioning sickness. For automatic climate control systems, 26°C is a more suitable temperature.
14
2
Share

Which manufacturer produces the 5G06 engine?

5G06 engine is an engine under Dongfeng Fengshen. The characteristic of this engine is reduced fuel consumption. Dongfeng Fengshen engines are produced by PSA Group. Dongfeng Fengshen has many SUV models, including AX4, AX7, and Yixuan GS. Dongfeng Fengshen's design philosophy: This car adopts a brand-new design with robust body lines that convey a sense of power. The body structure is very harmonious and orderly, inheriting the family design concept in terms of appearance, presenting an aggressive stance. It aligns with the aesthetic preferences of modern young consumers for automobiles. Dongfeng Fengshen's development goals: In 2021, Dongfeng Fengshen focused on making the Yixuan family a best-seller, with the Fengshen Yixuan becoming the top T-powered family sedan in China. The Yixuan GS is a compact SUV equipped with two engines: a 1.0-liter turbocharged engine and a 1.5-liter turbocharged engine. The 1.0-liter turbocharged engine has a maximum power of 92 kW at 5500 rpm, a maximum torque of 196 Nm, and a torque range of 1500 to 4500 rpm.
10
3
Share

How much does it cost to repair oil leakage caused by chassis impact?

Repair costs for oil leakage caused by chassis impact vary. Below is a detailed cost analysis: 1. Classification: If the transmission is impacted and leaks oil, the solution is to use aluminum alloy welding technology or apply specialized sealant for plugging the leak. Generally, the repair cost for plugging the leak is around a few hundred yuan. If the oil leakage is caused by damage to the oil pan, the oil pan can be replaced, with a price of around 1000 yuan. 2. Precautions: The most vulnerable parts of a car's chassis are various pipelines, such as brake hydraulic pipes and fuel pipes. However, these pipelines are usually hidden and protected in the grooves of the chassis steel plate, making them difficult to be impacted. If the chassis hits a step, the chassis steel plate contacts the step in a flat state. Therefore, the pipelines hidden in the grooves of the steel plate will not be damaged, and there is no need to worry too much about the oil pipes being hit. If the impact is caused by protruding parts on the ground, it is a point-like impact with significant force. Protruding stones may hit the pipelines in the grooves, causing oil or fluid leakage. In such cases, extra attention is needed to identify the cause of the impact and the location of the oil leakage.
9
3
Share

Is the Mercedes-Benz A200 an imported car?

, among which the hatchback is an imported vehicle. Below is an introduction to the Mercedes-Benz A200: Introduction to the exterior of the Mercedes-Benz A200: The Mercedes-Benz A200 has dimensions of 4419/1796/1432 mm in length, width, and height, with a wheelbase of 2729 mm. In terms of wheelbase, the A200 has a certain advantage compared to other models in the same class. The overall side profile of the car continues the dynamic design of the previous generation, with more inward-tapered styling on the C-pillar and front bumper, creating a lower and more sporty visual effect. Introduction to the powertrain of the Mercedes-Benz A200: It is equipped with two engines: a 1.4T and a 2.0T. The 1.4T engine has a maximum power of 163 horsepower and a maximum torque of 250 Nm, while the 2.0T engine has a maximum power of 224 horsepower and a maximum torque of 350 Nm, paired with a 7-speed dual-clutch transmission. The imported hatchback Mercedes-Benz A200 does not have an engine soundproofing cover, and the rear suspension adopts a torsion beam structure. These two aspects are completely consistent with the domestically produced A180L and A200L.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.