Should a Mercedes-Benz use 92 or 95 gasoline?

2 Answers
IkerAnn
07/25/25 7:19am
Mercedes-Benz can use 92 gasoline. 92 gasoline refers to fuel with an octane rating of 92 and heptane rating of 8, which is suitable for vehicles with relatively low compression ratios. Taking the Mercedes-Benz GLS 2021 GLS400 4MATIC as an example: The manufacturer of this vehicle is Mercedes-Benz (imported), classified as a full-size SUV, equipped with a 9-speed automatic transmission, and configured as a 5-door, 7-seat SUV. The dimensions of this vehicle are 5214mm in length, 1956mm in width, and 1823mm in height, with a wheelbase of 3135mm. It features turbocharged intake, front-engine four-wheel drive layout, permanent all-wheel drive system, and a unibody construction.
Was this review help?
13
1
Share
MacPreston
08/10/25 6:30pm
Mercedes-Benz should use 95-octane fuel, don't mess around. As someone with car repair experience, I've seen many Mercedes-Benz models develop issues from using 92-octane fuel, with knocking problems being the most common - that's when the engine makes a pinging sound, damaging internal components like piston rings and valves. Mercedes-Benz vehicles are precision-engineered with higher octane requirements; using 95-octane ensures smooth operation and prevents problems like increased fuel consumption and reduced power. The manual clearly recommends 95-octane or higher fuel - check your specific model to confirm. While saving money with 92-octane might seem okay short-term, the long-term repair costs will be greater. Choose reputable gas stations when refueling, as high-quality 95-octane fuel provides better protection. Regularly check the fuel system to prevent carbon buildup from affecting performance. Safety comes first when driving - don't risk major damage for minor savings. A well-maintained car delivers better driving experience.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What to Do When the Car Doesn't Supply Fuel During Ignition?

If the fuel pump diaphragm is cracked or damaged, gasoline may leak into the crankcase, diluting the engine oil and causing the oil level to rise, which can be checked using the oil dipstick. It should be replaced promptly. Ensure that all individual pieces and the holes on the pump body are properly aligned, and the fastening nuts are securely tightened. When disassembling, first clamp the diaphragm pull rod in a bench vise, remove the nuts, and take out the old diaphragm.
1
0
Share

What to Do When the Car Radiator Water is Too Dirty?

Slowly add radiator automatic cleaner into the radiator until the coolant reaches the normal level, then tighten the radiator cap. Allow the water temperature to reach normal operating temperature, then run the engine for 1-40 hours as needed. If there are hard water deposits in the cooling system, extend the running time to 10-48 hours. Drain the coolant containing deposits and replace it with antifreeze or clean coolant. Clean the radiator with automatic cleaner once a year.
13
0
Share

How to Connect Car Audio Wires?

Connect the two 6-inch speakers in parallel at the front doors, with the white wire connecting to the front right speaker. The gray wire connects to the front left speaker. Sony CD players cannot directly drive subwoofers; if the subwoofer has a built-in amplifier, you can add a low-frequency line to the RCA interface.
12
5
Share

How to Replace Summer Windshield Washer Fluid in Winter?

If it's the same brand of windshield washer fluid, there's no need to drain the summer fluid - you can directly add the winter fluid as they are mixable. For different brands, first completely drain the summer fluid before pouring in the winter formulation. To remove summer fluid, simply hold down the windshield washer button until the system is emptied. Locate the filler neck (typically marked with a washer symbol and blue cap), open the cap, and pour in the winter windshield washer fluid.
6
0
Share

What to do if the car's PS won't start?

Be sure to refuel at regular gas stations, and you can bring a gauze to wrap around the fuel gun nozzle when going out to filter impurities. Poor quality antifreeze can easily cause the engine to freeze and crack, resulting in the car's water pump being unable to operate and the car not starting. It is necessary to add suitable antifreeze. Excessive carbon buildup in the vehicle can cause the car not to start. Frequently driving at high speeds can reduce carbon buildup.
3
3
Share

How to Repair a Damaged Car Touchscreen?

Unclean residue from the screen protector can cause unresponsiveness. Wipe the screen clean to ensure there is no grease or water, and normal functionality should be restored. It is necessary to visit a specialized repair shop where technicians will use professional diagnostic equipment to inspect the screen and perform targeted repairs. To initialize the central control system, press the reset button, then reinstall the system afterward to restore normal operation.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.