···
Log in / Register

Should 30 cm be maintained when starting uphill and going downhill?

1 Answers
ParkerDella
09/07/25 6:18am
Yes, it is best to maintain 30 cm. Tips: After the test starts, shift to first gear, release the handbrake, gently release the clutch, and after the vehicle stabilizes, go up the slope, keeping as close to the side line as possible within 30 cm. Try to control the clutch to keep the vehicle speed as slow as possible. For fixed-point parking, use a reference object to align with the pole to ensure the front of the car is aligned with the pole, so the fixed point is accurate. Other Subjects: The test subjects are divided into the road traffic safety laws, regulations, and related knowledge test subject (hereinafter referred to as "Subject 1"), the field driving skills test subject (hereinafter referred to as "Subject 2"), and the road driving skills test subject (hereinafter referred to as "Subject 3"). The test sequence follows Subject 1, Subject 2, and Subject 3 in order. Only after passing the previous subject can you proceed to the next subject.
Was this review help?
16
2
Share
More Forum Discussions

How far can a 72V 20Ah electric vehicle travel?

72V 20Ah electric vehicles can typically travel about 50 kilometers. The battery specification 72V 20Ah indicates that the electric vehicle is equipped with four 20Ah batteries, where 72V is the rated voltage of the battery and 20Ah is the rated capacity. The rated voltage of the battery determines the optimal operating voltage for the connected electrical appliances, and the rated voltage of the battery provides a reference value for the output voltage of the charger, which should be greater than 72V. An electric vehicle, also known as an electric drive vehicle, is powered by electricity and is divided into AC electric vehicles and DC electric vehicles. It uses batteries as the energy source, converting electrical energy into mechanical motion through components such as controllers and motors, and controls the speed by adjusting the current. The battery in an electric vehicle is the power source, typically a lead-acid battery that can be recharged and reused.
19
3
Share

What is the difference between ABS and CBS on motorcycles?

Here are the differences between ABS and CBS on motorcycles: Functional aspects: CBS does not have an anti-lock function. This system can only reasonably distribute braking force between the front and rear wheels. The core function of CBS braking is that when the rider operates either the front brake or the rear brake alone, both wheels receive appropriate and effective braking force. ABS has an anti-lock function, which prevents wheel lock-up during heavy braking. The role of ABS is to automatically control the braking force during vehicle braking, ensuring the wheels do not lock up and maintain a rolling-sliding state, thereby maximizing the adhesion between the wheels and the road. Principle aspects: The ABS system is an anti-lock braking system that prevents wheel lock-up during emergency braking at high speeds by applying intermittent braking (pulse braking). This means it provides braking effect without locking the wheels, thus preventing skidding during emergency braking at high speeds and ensuring driving safety. The CBS system refers to the combined braking system, which links the front and rear brakes. The principle of this system is that when braking, if both front and rear brakes are applied simultaneously, the vehicle achieves the shortest braking distance. Therefore, some manufacturers link the rear brake to the front brake.
2
0
Share

Where is the Fit's Air Filter Located?

The car's air conditioning filter is installed in two locations: behind the glove box of the front passenger seat and on the lower right side of the windshield. Here is more information about the Fit: 1. The Fit is a hatchback launched by GAC Honda, with the third generation model released on May 29, 2014. 2. Since its introduction in 2001, the Fit has sold over 4.7 million units in 115 countries worldwide. 3. The Fit is equipped with Honda's new EDT engine, a 1.5L direct-injection DOHC i-VTEC engine, CVT continuously variable transmission, Idle-stop engine energy-saving automatic start-stop system, VSA vehicle stability control system, three-mode rearview camera display system, ESS emergency brake warning system, HSA hill start assist system, intelligent screen connectivity system, and ten other advanced technologies leading its class.
11
2
Share

What Brand Does MG Belong To?

MG is a brand of SAIC Motor, belonging to domestic production. Currently, MG produces models such as the MG7 series, MG3 series, MG6 series, and MGTF sports cars. The production base for the Chinese market is located in Nanjing, while the international market base is in Longbridge, UK. Below is some relevant information about MG: 1. The English name of MG is MORRIS GARAGE. It is a British automobile brand acquired by China. In 1924, MG Motor Company was established, primarily producing convertible sports cars. 2. MG sports cars are renowned for their unique design, excellent performance, and fine craftsmanship. From the post-World War II period to 1960, MG Company flourished, with a large number of products sold to the United States and highly praised by American consumers.
5
1
Share

What is the displacement of the Prado?

All 10 models of the Prado (also known as the Land Cruiser Prado) produced by the FAW Toyota joint venture are equipped with a 4.0-liter displacement engine, featuring the same engine, chassis, and transmission. The differences lie in the comfort configurations, with the flagship version featuring air suspension. There is also an imported Middle East version, which comes with a 2.7-liter displacement. Below is relevant information about displacement: 1. Displacement (Swept volume) is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy from fuel into mechanical energy) per unit of time, resulting in better "power performance." Therefore, off-road vehicles and sports cars typically have relatively larger displacements. 2. The working volume through which the piston moves from the top dead center to the bottom dead center is called the cylinder displacement. If an engine has multiple cylinders, the sum of the working volumes of all cylinders is referred to as the engine displacement, usually expressed in liters (L). Engine displacement is one of the most important structural parameters, more representative of engine size than cylinder diameter and number, and many engine indicators are closely related to displacement.
19
0
Share

How to Reset the Maintenance Light on a 2011 Lavida?

There are two methods to reset the maintenance light on the Lavida: using an automotive computer diagnostic tool for maintenance reset or manual reset. The specific steps are as follows: 1. Turn off the engine and press and hold the reset button "A" while stepping on the brake. 2. Turn the ignition switch to "ON" without starting the car. 3. The characters "INSP" will flash or the display will blink. 4. Continue holding the reset button "A" until "..." appears on the display. 5. Release the reset button "A" and take your foot off the brake. 6. Turn the ignition switch back to the "Off" position. The reset process is now complete.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.