Shift Gear First or Start the Engine First?

1 Answers
OPeter
07/24/25 7:14pm
Usually, it is recommended to shift to neutral first and then start the engine, but you can also start the engine while in gear, depending on the driver's habit. Starting the engine in gear requires pressing the clutch. Automatic transmission vehicles do not require gear shifting while driving, whereas manual transmission vehicles need timely gear shifting to adjust speed and engine torque. Precautions for driving an automatic transmission car: 1. Power: Power is crucial, and you should not floor the accelerator pedal. For better acceleration, first downshift and then speed up—this is best for the car. 2. Waiting at traffic lights: The most important thing to note is not to shift into P (Park) when stopping. Normally, shifting into N (Neutral) and applying the handbrake is sufficient when waiting at a red light. 3. Parking in a garage: When parking, ensure the car comes to a complete stop before switching between forward and reverse gears.
Was this review help?
1
1
Share
More Forum Discussions

Where is the memory card slot located in the Trumpchi GS4?

The central control navigation DVD system of the GAC Trumpchi GS4 only supports USB expansion, with a reserved USB interface, and does not support the use of memory cards. Relevant information about the car dashboard is as follows: 1. Introduction: The dashboard (instrument-panel) is a rigid flat plate or structural component used to install instruments and related devices. It can be categorized by type into screen-type dashboards, frame-type dashboards, channel-type dashboards, and cabinet-type dashboards. 2. Function: The dashboard can be equipped with external lighting and can also be attached to a control console. It comes in various forms and specifications, allowing for the installation of various instruments as needed, and can also combine various dashboards into a single unit as required.
16
0
Share

What is the top speed of the Nissan Terra?

The Nissan Terra can reach a top speed of around 200 km/h on highways. Powertrain: The domestically produced TERRA Terra is equipped with a QR25 2.5L naturally aspirated engine, delivering a maximum power of 135kW. In terms of transmission, the engine is paired with either a 6-speed manual or a Jatco 7-speed automatic transmission. The Terra also features a part-time four-wheel-drive system. Top Speed: The top speed is measured on flat, windless roads with zero acceleration, meaning gradient resistance and acceleration resistance are zero. Therefore, the primary resistance factors affecting top speed are air resistance and rolling resistance.
1
1
Share

How many liters of engine oil does the Jaguar F-PACE require?

Jaguar F-PACE requires approximately 4.5 liters of engine oil during maintenance. Power of the Jaguar F-PACE: The power is quite good. This Jaguar F-PACE features full-time four-wheel drive, delivering a strong sense of sportiness when driving. Transmission of the Jaguar F-PACE: The 2.0T engine paired with full-time four-wheel drive and an 8-speed automatic transmission is very impressive. The car's acceleration provides a linear feel with strong power reserves, though the push-back sensation isn't particularly pronounced. Additionally, the car's engine sound is exceptionally pleasing. During driving, gear shifts are almost imperceptible, and transitions are very smooth regardless of throttle input or road conditions.
8
5
Share

Does the Haval Chitu have four-wheel drive?

The Haval Chitu has not yet been launched. Vehicle Information: The specific powertrain details of the vehicle are still unclear, but it is unlikely to be equipped with a four-wheel drive system. The overall styling of the new Haval Chitu is particularly attractive. In terms of exterior design, the Haval Chitu adopts the brand's signature styling, featuring a very wide lower grille and sharp headlights on both sides with a well-arranged internal light cluster that looks vibrant when illuminated. The rising waistline on the side of the body creates a sense of readiness, giving it a strong sporty appearance. Four-Wheel Drive Version: The positioning of the Haval Chitu is not particularly high-end, but as an SUV model, it would be more appropriate to have a four-wheel drive version.
3
1
Share

What causes noticeable jerking when shifting into reverse gear?

Noticeable jerking when shifting into reverse gear is typically caused by transmission issues, specifically clutch plate slippage. Here are the related causes: 1. Damage to the reverse gear synchronizer. Solution: Repair or replace the reverse gear synchronizer. 2. Damage to the reverse gear teeth, such as broken or chipped teeth. Solution: Repair or replace the reverse gear teeth. 3. Damage to the reverse gear bearing, or poor bearing lubrication causing friction noise. Solution: Repair or replace the bearing. 4. Releasing the clutch too quickly. Try shifting at 3000 RPM - the jerking will be significantly reduced. When downshifting, wait for the RPM to drop before shifting.
2
0
Share

Why does the Honda CR-V cool down slowly?

It is common in daily life for the Honda CR-V to have slow cooling. Excessive dirt in the air conditioning refrigerant: Increased resistance reduces the flow of refrigerant to the expansion valve, leading to ineffective cooling of the car's air conditioning system. Air entering the air conditioning system: Once air enters, it can cause excessive pressure in the refrigerant lines and poor refrigerant circulation. This type of fault mainly occurs due to degraded sealing of the cooling system or incomplete vacuuming during maintenance. Reduced heat dissipation capacity of the condenser: Due to varying working environments, the condenser located in front of the car's engine can become covered with oil, dirt, or debris, thereby reducing its heat dissipation capacity.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.