Roewe RX5 Body Steel Strength

How to decode the anti-theft lock on Besturn B50?

To remove the anti-theft lock on Besturn B50, you need to visit a 4S shop and seek professional assistance, as they may need to adjust the car's ECU. There are two methods to deactivate the car's anti-theft system: First method: Open the car's trunk and lock all doors. Insert and remove the car key more than 6 times, which will clear the ID stored in the remote control. Then, manually lock the driver's side door using the interior door handle, press the lock button once, and finally open the driver's side door to deactivate the car's anti-theft system. Second method: Remove the battery from the remote control, press the lock button on the remote control, then reinstall the battery. Close and lock all doors, and use the same method as the first one to insert and remove the key more than 6 times. At the same time, the car's hazard lights will flash twice consecutively. Then, turn the key to the ACC position and lock the car once more to deactivate the anti-theft system.

11

5

Share

What type of oil is suitable for the Changan CS55?

Changan CS55 is recommended to use 5W-40 fully synthetic oil, with an oil filling capacity of approximately 4L. The following are relevant details: 1. Engine oil. With a density of about 0.91×10 cubic meters, it can lubricate and reduce friction, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is known as the 'blood' of the car. Under such harsh operating conditions, only qualified lubricating oil can reduce the wear of engine components and extend their service life. 2. Engine oil consists of base oil and additives. The base oil is the main component of the lubricating oil, determining its basic properties, while the additives can compensate for and improve the shortcomings of the base oil, giving it new properties, making it an important part of the lubricating oil. The engine is the heart of the car, containing many metal surfaces that move against each other. These components operate at high speeds, in poor environments, with working temperatures reaching 400°C to 600°C.

3

2

Share

Why does the Haval H6 have no network connection?

Haval H6 may have no network connection due to being in an area without signal or experiencing hardware failure. Below is an introduction to the Haval H6: 1. Overview: The Haval H6 is the flagship model of the Haval brand. On August 25, 2011, the Haval H6, positioned as an urban intelligent SUV, was grandly launched at the Great Wall Motors Tianjin new factory. It offers Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, divided into three versions: Urban, Elite, and Premium. 2. Vehicle Features: It is the world's first fuel SUV with full-vehicle FOTA upgrade capability, the world's first fuel SUV with 5G expansion capability, the world's first non-luxury brand SUV equipped with trace reverse function, the SUV with the strongest application of 2000Mpa hot-formed steel in its class, the only SUV in its class with full-scenario recognition AEB emergency braking, and the SUV with a leading ultra-sensing future smart cockpit in its class.

2

5

Share

What causes high engine RPM when depressing the clutch to shift gears?

The reasons for high engine RPM when depressing the clutch to shift gears are as follows: 1. Normally when shifting gears, you should simultaneously depress the clutch and release the accelerator. The moment the power is cut off, the engine RPM begins to decrease. If the accelerator is released too early, the engine RPM may drop first, potentially causing engine braking and resulting in a jerking sensation, similar to suddenly stepping on the brakes. If the accelerator is released too late when the clutch is already disengaged, continuing to press the accelerator with no load on the engine will inevitably cause the RPM to rise. 2. Since the vehicle is in motion, the idle speed will be slightly higher due to the ECU's idle compensation function. When you depress the clutch, the engine load is removed, and the operating resistance instantly decreases, so the engine's rotational force increases, causing the RPM to rise. It's like pulling an object forward with a rope - if the rope is suddenly cut, you would lurch forward abruptly. When the RPM rises beyond the target idle speed, the ECU will intervene to restore the idle speed to the target level for the current operating condition.

1

3

Share

How to Adjust the Time on the Chang'an Suzuki SX4 S-Cross?

Suzuki SX4 S-Cross time adjustment method is as follows: 1. Press the time adjustment button on the left side of the instrument panel, press once to select the hour unit for adjustment. 2. Then press the right button to adjust the numerical value, each press will increase the time value by one, until the correct value is reached. 3. Press the left button twice to select the minute unit for adjustment, then press the right button to adjust the numerical value until the correct value is reached. Additional information: The Suzuki SX4 S-Cross is a commercial vehicle under Suzuki. In terms of power, the overseas version of the new car will be equipped with 1.0T and 1.4T gasoline engines as well as a 1.6T diesel engine. In terms of transmission, the 1.0T engine will be matched with a 5-speed manual transmission, while the other two engines will be paired with either a 6-speed manual or a 6-speed automatic transmission.

15

5

Share

Can a spare tire that has been stored for 5 years still be used? Does it need to be replaced?

A spare tire can be used for a few days, but it should not be used for an extended period. It is best to replace the spare tire after driving the vehicle to a repair shop to fix the original tire. Additionally, it is important to note that while there is no specific regulation on the mileage or duration of use for a spare tire, speed should be limited, especially for non-full-size spare tires, with a maximum speed not exceeding 80 km/h. Generally, the service life of both spare tires and regular tires is between 3 to 5 years. The following methods can help extend the lifespan of a spare tire: 1. Regularly inspect and clean the spare tire: Tires stored for a long time can accumulate dust. Regular inspections of the tire pressure and surface condition, along with periodic cleaning, help preserve the spare tire. 2. Do not store oil products with the spare tire: Since spare tires are made of rubber, they can be eroded by various oil products. If the owner accidentally spills lubricating oil stored in the trunk onto the spare tire, the rubber of the spare tire may swell and corrode due to the oil, significantly reducing its lifespan.

3

0

Share

Roewe RX5 Body Steel Strength

How to decode the anti-theft lock on Besturn B50?

What type of oil is suitable for the Changan CS55?

Why does the Haval H6 have no network connection?

What causes high engine RPM when depressing the clutch to shift gears?

How to Adjust the Time on the Chang'an Suzuki SX4 S-Cross?

Can a spare tire that has been stored for 5 years still be used? Does it need to be replaced?

Why can't the Volkswagen door be locked from the inside?

Does Engine Bearing Failure Require Overhaul?

How to Clear the Wrench Icon on Tiggo 5?

What are the three instrument panel styles of the 2020 Audi A4?