Requirements for Fire Lane Setup

1 Answers
Marvin
07/30/25 5:50am
Fire lane setup requirements are as follows: 1. Fire lane: The clear width and height should not be less than 4.0 meters, and the slope of the open space for fire truck parking should not exceed 3%. Pipes and culverts on the fire lane should be able to withstand the pressure of large fire trucks. 2. Circular fire lane: There should be at least two connections with other lanes. 3. Dead-end fire lane: A turning lane or turning area should be provided, with the turning area not smaller than 12mX12m. For high-rise buildings, it should not be smaller than 15mX15m; for large fire trucks, the turning area should not be smaller than 18×18 square meters.
Was this review help?
9
4
Share
More Forum Discussions

What is the tayron?

tayron is the Tayron, a mid-size SUV under FAW-Volkswagen. The vehicle has a length of 4589mm, width of 1860mm, height of 1660mm, a wheelbase of 2731mm, front track of 1576mm, rear track of 1566mm, a top speed of 200km/h, and a 0-100km/h acceleration time of 9.9 seconds. The body structure is a 5-door, 5-seat SUV. The Tayron is equipped with a 1.4L turbocharged engine, delivering a maximum power of 110kW at 5000-6000rpm, and a maximum torque of 250Nm at 1750-3000rpm. It meets the China VI emission standards.
19
2
Share

Are Hybrid Vehicles Fuel-Efficient?

Hybrid vehicles are fuel-efficient, not just in specific scenarios (such as highway driving), but whether on highways or in urban areas, whether the roads are clear or congested, or whether the driver is gentle or aggressive—fuel consumption remains very low. The inclusion of a generator in hybrid electric vehicles allows the engine to always maintain optimal working conditions, and the car automatically switches to engine power when needed. Hybrid vehicles are classified as energy-efficient cars, not traditional fuel-powered vehicles, primarily because they still rely mainly on the engine, using fuel as the power source, which still produces pollutants.
9
4
Share

How Many Days After Painting Can You Wash the Car?

Time to wash the car after painting: 1. If the vehicle is painted in a paint booth, since it has already stayed in the booth for 3 to 4 hours, it can be washed immediately after being taken out; 2. For vehicles painted at an official 4S shop, they can be washed when the staff delivers the car, just remind the car wash staff to be careful; 3. For cases where the car is painted and picked up on the same day, it is recommended to wait 2 days before washing; 4. If the vehicle maintains sufficient ventilation and humidity, it can be washed after 6 to 7 hours; 5. If the paint is dry, you can wash the car 2 days after the paint has dried.
16
5
Share

At what mileage do domestic cars generally start experiencing problems?

Generally, the total lifespan mileage of domestic cars ranges between 200,000 to 300,000 kilometers. Impact of driver behavior on car lifespan: The specific lifespan varies depending on each manufacturer's conditions and the type of engine used. The actual lifespan also differs from person to person due to varying driving habits. Some drivers frequently drive at high gears with low speeds, which significantly impacts the engine's lifespan. Impact of driving conditions on car lifespan: The road conditions on which the vehicle is frequently driven also affect its lifespan. For example, two identical cars driven by the same person—one frequently driven on rough, muddy roads and the other on smooth concrete roads—will result in the first car having a shorter lifespan than the second.
15
1
Share

Can a Motorcycle Battery Electrocute People?

The voltage of a motorcycle battery is only 12V, which falls under the safe voltage range. Under normal circumstances, it will not cause any harm to the human body. Even if connected incorrectly, it will only blow the battery fuse or damage the wiring on the motorcycle, without directly harming a person. Introduction to the Battery: An electric motorcycle battery is a type of power battery capable of high-rate discharge, being environmentally friendly and energy-efficient. It improves upon traditional lead-acid battery processes, establishing a new green and energy-efficient manufacturing method. Advantages of the Battery: By eliminating traditional formation processes, it removes major sources of pollution, making the product eco-friendly. It offers high quality, long service life, and large capacity. It performs well in low-temperature startups, making it particularly suitable for use in cold northern regions. As a power battery, it supports high-rate discharge. It has low self-discharge, making it suitable for long-term storage. Compared to other imported batteries, it offers significant cost-performance advantages.
8
0
Share

What does 300cc mean for a motorcycle?

300cc for a motorcycle refers to the displacement of the motorcycle's engine combustion chamber being 300 milliliters. Calculation method for motorcycle displacement: Cylinder cross-sectional area X stroke X number of cylinders = total displacement in cc. Here, stroke refers to the reciprocating movement of the piston in the cylinder. When the piston moves from top dead center to bottom dead center, the distance traveled is called the piston stroke, or simply stroke. Additional information: Larger displacement means higher fuel consumption and greater horsepower. Smaller displacement results in lower fuel consumption and reduced horsepower. 1cc = 1 milliliter. Milliliter is a unit of volume, with the main unit being liter (L). 1 milliliter = 1 cubic centimeter, and 1000 milliliters = 1 liter. 100CC refers to a motorcycle's displacement, and a 125 motorcycle is a bike with a displacement of 125CC.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.