Replace the Wiper Blades or the Entire Wiper Assembly?

What to Pay Attention to When Selling a Scrapped Vehicle?

Key considerations when selling a scrapped vehicle include removing the license plates and using tools to erase the engine number and chassis number. Below is an introduction to relevant information about scrapped vehicles: 1. Vehicle Scrapping Process: After inspection confirms that the vehicle matches the license plate, documents, and records and meets scrapping conditions, the vehicle is sent to a designated location. The engine, cab, and other parts are processed for scrapping, and the supervising officer stamps the scrapping approval. The vehicle is then delivered to a nationally certified scrap car recycling company for dismantling. A technical inspection approval form is issued, and the scrapped vehicle's license plate and documents are collected. After verification, the vehicle's records are canceled, and a "Vehicle Scrapping Notice" is issued to the owner. The canceled vehicle records are stored separately for two years. 2. Hazards of Scrapped Vehicles: Influenced by profit, many owners often sell scrapped vehicles to car dealers, who offer higher prices to attract sellers. As a result, scrapped vehicles re-enter the market and reappear on roads. Traffic police authorities state that scrapped vehicles are referred to as "road killers" and mobile time bombs, posing numerous safety hazards during operation. Private handling of scrapped vehicles is not permitted by the state.

7

4

Share

What Causes Body Shaking After High-Speed Driving?

Vehicle shaking can be caused by throttle issues, fuel problems, or spark plug problems. Below are the specific reasons for vehicle shaking: Throttle Issues: The main cause of a dirty throttle is carbon buildup at the connection between the throttle valve plate shaft and the throttle body, leading to inaccurate throttle opening and resulting in idle shaking. The throttle can be cleaned. If shaking persists after cleaning, the throttle assembly may be damaged and require replacement. Fuel Problems: Poor-quality gasoline can result in poor fuel injector atomization, leading to incomplete combustion of the air-fuel mixture in the cylinder and causing idle shaking. It is recommended to use high-grade gasoline to clean the fuel system after finishing the current tank. Spark Plug Problems: If the spark plug fails to ignite, causing one or more cylinders to stop working, this can also lead to idle shaking. Check for cracks in the ceramic part of the spark plug and ensure the ignition module is functioning properly.

7

0

Share

Does stopping on the crosswalk at a red light count as running a red light?

Stopping a vehicle on the crosswalk does not count as running a red light. Running a red light refers to the act of a motor vehicle violating traffic signal instructions by crossing the stop line and continuing to move when the red light is on and prohibits passage. To determine a red-light violation, at least three pieces of photographic evidence are required: the vehicle has not left the stop line when the red light is on; the vehicle has passed through the intersection when the red light is on; the vehicle has crossed the line and continues to move forward when the red light is on. Article 26 of the "Road Traffic Safety Law": Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. Article 44: Motor vehicles passing through intersections shall do so in accordance with traffic signals, traffic signs, traffic markings, or the direction of traffic police. Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations" stipulates that driving a motor vehicle in violation of traffic signal instructions results in a deduction of 6 points. Ways to avoid running a red light: When there are arrow signal lights, follow the arrow lights; otherwise, follow the circular lights; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just flashes, if you are close and moving fast, you should proceed, as stopping might be impossible and you may cross the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line at an intersection.

17

2

Share

Why does the Jetta fan keep running?

Jetta fan keeps running due to excessively high engine coolant temperature or a short circuit in the fan circuit. Here are the specific details about automotive cooling fans: 1. Automatic activation conditions: The radiator fan automatically activates when coolant temperature reaches 98°C. The car's radiator fan operates automatically without manual control, doesn't start at low temperatures, and has two speed gears for medium and high temperatures. 2. Medium/high fan speeds: Typically activates medium speed at 95°C and high speed at 105°C. When coolant reaches 95°C, the fan starts running at 1600 RPM, and when temperature reaches 105°C, the fan speed increases to approximately 2400 RPM to enhance cooling efficiency.

4

5

Share

What are the leading manufacturers of new energy vehicle motors?

Leading manufacturers of new energy vehicle motors include Wolong Electric, Joyson Electronics, and Inovance Technology. Introduction of Wolong Electric: A leading third-party motor and electronic control manufacturer in China. The EC series of BAIC New Energy currently on sale is equipped with the company's drive motors. Introduction of Joyson Electronics: A globally leading multinational automotive electronics company, its intelligent driving control systems and new energy vehicle power management systems serve major global and domestic first-tier vehicle manufacturers. Introduction of Inovance Technology: One of the leaders in China's micro and special motor industry, and also one of the largest suppliers of motors for new energy vehicles in China.

5

1

Share

What are the functions of central locking?

Functions of central locking: 1. Central control: When the driver locks the door beside them, other doors are simultaneously locked. The driver can open all doors at once via the door lock switch or open a single door individually. 2. Speed control: When the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening doors by operating the door handles. 3. Individual control: In addition to the driver's door, separate spring lock switches are installed on other doors, allowing independent control of each door's locking and unlocking. The full name of central locking is Central Control Door Lock, an automotive accessory that enables remote door locking/unlocking without inserting a key into the keyhole. It consists of a door lock switch, actuator, and controller.

7

1

Share

Replace the Wiper Blades or the Entire Wiper Assembly?

What to Pay Attention to When Selling a Scrapped Vehicle?

What Causes Body Shaking After High-Speed Driving?

Does stopping on the crosswalk at a red light count as running a red light?

Why does the Jetta fan keep running?

What are the leading manufacturers of new energy vehicle motors?

What are the functions of central locking?

Which Lane Should a Motorcycle Stop in at a Traffic Light?

Should You Engage the Handbrake or Shift Gears First After Getting in the Car?

What Causes the Click Sound When Starting the Car?

Will Tire Pressure Drop on Its Own?