Replace Only the Timing Belt or the Three-Piece Set?

1 Answers
DelSadie
07/29/25 6:17pm
When replacing the timing belt, the three-piece set must also be replaced. Here is some relevant information about replacing the timing belt: How the Belt Works: The engine water pump is driven by the same timing belt. If the belt is worn out or corroded, it must be replaced. If the water pump is independently driven, the timing belt does not need to be replaced unless it has reached its replacement cycle. Replacement: The timing belt is a consumable part. If the timing belt breaks, the camshaft will not operate in sync, which can lead to severe damage from valve and piston collisions. Therefore, the timing belt must be replaced according to the mileage or time specified by the manufacturer.
Was this review help?
9
3
Share
More Forum Discussions

What to Do When the Car Shows a Lock Symbol?

A car icon with a lock symbol on the dashboard indicates the engine's electronic anti-theft system. To resolve this issue: Press the brake pedal, turn the steering wheel left and right, then press the start button to ignite the vehicle. Methods to prevent steering wheel lock are: 1. Steering wheel lock often occurs with novice drivers who attempt to manually straighten the wheel after turning off the engine, inadvertently activating the anti-theft feature. 2. After engine shutdown, avoid touching the steering wheel. If adjustment is necessary, restart the engine before making corrections.
3
0
Share

How Long Can You Drive with an Oil-Burning Car?

Temporarily drivable, but poses significant risks and may lead to greater losses. It is recommended to address the issue promptly. Specific hazards are outlined below: 1. Excessive carbon buildup inside the engine: Increases the likelihood of engine knocking, severe piston ring seizure, accelerated wear of cylinders and pistons, and in extreme cases, may render the engine irreparable. 2. Clogging and failure of the catalytic converter: The catalytic converter reduces exhaust pollutant emissions. Excessive exhaust can clog and disable it, severely impacting engine performance and incurring high replacement costs. 3. Exceeds emission standards, contributing to environmental pollution.
17
5
Share

Is a car tire pressure of 210 normal?

A car tire pressure of 210 is slightly low and may require some inflation. Generally, the normal tire pressure for passenger cars is around 2.2-2.5, but not all vehicle models adhere to this standard. More details are as follows: 1. Low tire pressure increases the contact area between the tire and the ground, leading to abnormal temperature rise inside the tire while driving. Additionally, severe deformation of the tire sidewall accelerates the aging of internal steel wires and fabric layers, increasing the risk of a blowout, fuel consumption, and reducing tire lifespan. 2. Generally, a tire pressure value within the range of 2.2~2.5 BAR is safe. However, in summer, when temperatures are high, the tire pressure may rise beyond the normal range after driving. Therefore, in summer, it is advisable to maintain tire pressure at the lower end of the normal range, around 2.2 BAR, while in autumn and winter, it can be adjusted to the higher end, around 2.5. 3. Abnormal tire pressure causes uneven tire wear, reduces driving comfort, and compromises driving safety.
5
0
Share

How Long Does Car Maintenance Take?

Car maintenance typically takes between 40 minutes to 3 hours. The maintenance items include: 1. Changing the engine oil and oil filter; 2. Replacing the air filter; 3. Inspecting the spark plugs; 4. Replacing the fuel filter; 5. Adding brake fluid; 6. Changing the transmission oil; 7. Cleaning the throttle body; 8. Cleaning the fuel injectors; 9. Inspecting the tires and brake system; 10. Replacing the cabin air filter; 11. Replacing the engine belt. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing.
18
1
Share

What to Do About a Small Dent on the Car Door?

Here are the solutions for a small dent on the car door: 1. Panel Beating: Panel beating is generally not a task car owners can complete on their own and requires the services of an auto repair shop. Owners considering cost factors can opt for a reliable repair shop; if considering the quality of workmanship and after-sales service, owners may choose a 4S dealership, which might be more expensive but ensures quality. 2. Car Dent Repair Kit (also known as a Bridge-Type Dent Puller): Using tools like a hot glue gun and bridge-type suction puller, the kit adheres to the car body with suction cups and then pulls out the dented area through the principle of tension.
7
0
Share

How to Deal with Urea Crystallization in the Exhaust Pipe?

The solutions for urea crystallization in the exhaust pipe include: modifying the layout and direction of the exhaust pipe, repairing the injection system, cleaning the crystallization in the exhaust pipe, or changing driving habits. More information about urea in the exhaust pipe is as follows: 1. The urea used in cars is primarily for regulating exhaust emissions and reducing atmospheric pollution. Urea is a liquid that is expelled along with the exhaust pipe. Crystallization of urea at the exhaust pipe is a normal phenomenon, especially in cold weather. 2. Drivers of vehicles that use urea should remember not to turn off the key immediately after shutting down the engine and not to switch off the main power supply. Wait patiently for three minutes until the urea solution has completely flowed back and there are no hissing or squeaking sounds before turning off the key.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.