Release the Handbrake First or Shift Gears First?

1 Answers
GabriellaMarie
07/29/25 1:02pm
When driving, you generally press the brake first, then release the handbrake, and finally shift gears. Below is relevant information about the car's electronic handbrake: Principle: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving control over parking braking through the friction generated between the brake disc and brake pads, except that the control method has changed from the previous mechanical handbrake lever to an electronic button. Function: The electronic handbrake extends from the basic parking function to the automatic parking function AUTOHOLD. The application of AUTOHOLD automatic parking technology allows drivers to avoid prolonged braking when the vehicle is stationary. When the automatic electronic parking brake is activated, it can prevent unnecessary sliding of the vehicle.
Was this review help?
18
5
Share
More Forum Discussions

What is the Certificate Number?

The certificate number is the number on the vehicle's certificate of conformity. The certificate of conformity is a necessary document when registering a vehicle. Only vehicles with a certificate of conformity meet the national standards for motor vehicles and can be sold on the market. Additional information: 1. A vehicle also has a Vehicle Identification Number (VIN), which is like the vehicle's "ID number." It is a unique 17-digit code used to identify the manufacturer, engine, chassis number, and other specifications of the vehicle. 2. The certificate of conformity is issued with the vehicle when it leaves the factory. When registering the vehicle, it must be submitted to the vehicle management office for archiving and replaced with the vehicle registration certificate. Therefore, the certificate of conformity for unregistered vehicles should be in the hands of the dealer, while for registered vehicles, it is stored in the vehicle management office's archives. 3. Both the VIN and the certificate number are important documents required for motor vehicle registration. The VIN, engine number, and chassis number must match the information on the vehicle's certificate of conformity to facilitate registration, annual inspections, and transfers. Missing any of these can cause significant inconvenience.
9
5
Share

Why Don't the Two Front Fog Lights Work?

The front fog lights may not be working due to reasons such as a short circuit, burnt-out bulbs, or blown fuses. Further investigation is needed to determine the exact cause. How to Use Fog Lights: The fog light switch is located on the light lever to the left of the steering wheel. Rotate the lever to turn on the fog lights, but note that the small lights must be turned on first. To activate the front fog lights, rotate the lever forward; to turn them off, rotate it backward. The rear fog lights can be turned on by continuing to rotate the lever forward after the front fog lights are already on. To turn them off, rotate the lever forward again. Purpose of Fog Lights: As the name suggests, fog lights are used in rainy or foggy weather. Their main feature is strong penetration in fog, making vehicles or pedestrians notice them early in low visibility conditions, thereby effectively preventing accidents. However, it's important to note that fog lights should not be used as regular headlights. Using fog lights on clear nights with good visibility can be just as harmful as misusing high beams.
11
2
Share

Can Temporary License Plates Still Be Used After Obtaining Official Plates?

After a new vehicle receives its official license plates, the temporary plates become invalid regardless of whether they have expired or not. Temporary license plates can be applied for at the local vehicle management office under any of the following conditions: 1. When driving the vehicle from the place of purchase to the place of use, temporary plates must be applied for at the vehicle management office in the place of purchase. 2. When transferring vehicle registration and after surrendering the official plates, temporary plates must be applied for at the local vehicle management office to drive the vehicle back to the original location. 3. For new vehicles in the local area that have not yet obtained official plates and need to be driven to another location for modifications, temporary plates must be applied for locally. After modifications are completed, temporary plates must be applied for at the modification location to drive the vehicle back to the original area. 4. When purchasing a vehicle locally and needing to drive it to another location, temporary plates must be applied for locally to drive to the other location; the same applies in reverse. 5. When the vehicle registration is not yet fixed and temporary use is required.
17
0
Share

What is the reason for the clunking sound when shifting to P gear without the car being fully stopped?

The reasons for the clunking sound when shifting to P gear without the car being fully stopped are: 1. The P gear lock hook inside the transmission hits the gear and makes a clunking sound when shifting without the car being fully stopped; 2. Incorrect operation sequence when parking on a slope; 3. Malfunction of the gear shift mechanism; 4. Wear and tear of the transmission gear. The solutions for the clunking sound when shifting to P gear without the car being fully stopped are: 1. When parking, step on the brake, shift to neutral, pull up the handbrake, release the brake, and then shift to P gear; 2. Check the transmission. Precautions for driving an automatic transmission car are: 1. Familiarize yourself with the automatic transmission gears; 2. Operate the brake and accelerator with one foot; 3. Do not coast in neutral; 4. Do not shift gears while driving; 5. Step on the brake when stopping temporarily; 6. Shift to P gear last when parking.
11
4
Share

What is the tiggo7?

tiggo7 is the logo of Citroën, a French automobile manufacturer. Many models under Citroën have been domestically produced in China, such as the C4L, Elysee, C3L, and C-Quatre. Relevant information about the Citroën C4L is as follows: 1. Engine of the Citroën C4L: The Citroën C4L is a compact family sedan, equipped with two types of engines: a 1.2-liter turbocharged engine and a 1.6-liter turbocharged engine. 2. Dimensions of the Citroën C4L: The Citroën C4L has a wheelbase of 2710 mm, with length, width, and height measuring 4675 mm, 1780 mm, and 1500 mm respectively. 3. Power of the Citroën C4L: The 1.2-liter turbocharged engine of the C4L delivers 136 horsepower and a maximum torque of 230 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750 to 3500 rpm.
13
0
Share

How to Set Up Automatic Tilt-Down Rearview Mirror for Camry When Reversing?

Camry's automatic tilt-down rearview mirror function can be operated through the vehicle's central control screen. First, ensure the vehicle is powered on or started. Then, navigate to the vehicle settings in the central control screen, locate the mirror settings within the vehicle settings, and find the automatic tilt-down mirror option to enable or disable it. Here are some additional details: 1. The rearview mirrors of a motor vehicle are tools that allow the driver, seated in the driver's position, to directly obtain external information about the rear, sides, and lower areas of the car. 2. To facilitate the driver's operation, prevent safety accidents during driving, and ensure personal safety, all countries mandate the use of rearview mirrors in vehicles. Moreover, all rearview mirrors must be adjustable in direction. Some vehicle models are equipped with electric rearview mirror adjustment functionality.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.