Reasons Why the Brake Pedal of Volkswagen Lavida Cannot Be Depressed?

How to Distinguish Between Different Generations of Accord?

Detailed introduction to distinguishing between different generations of Honda Accord: Ninth-generation Honda Accord: It comes with three powertrain options: 2.0L, 2.4L, and 3.0L V6. There are six models available based on different configurations, with engine options including 2.0L, 2.4L, and 3.0L. The maximum output power is 155 horsepower, 186 horsepower, and 261 horsepower, respectively. Eighth-generation Accord: The entire lineup is equipped with Honda's i-VTEC engine. The 2.0L i-VTEC engine features enlarged intake valves, delivering a maximum power of 156 horsepower (115 kW). Seventh-generation Accord: The entire lineup is equipped with a 4-cylinder 2.4L engine, producing a maximum power of 119 kW, paired with a 5-speed automatic transmission. It delivers a maximum horsepower of 162 and accelerates from 0 to 100 km/h in 9.3 seconds. Sixth-generation Accord: The 3.0 version is equipped with a 3.0L V6 engine, producing a maximum power of 203 horsepower, paired with a 4-speed automatic transmission.

10

4

Share

How to Deal with Driving Without a License?

Driving without a license will result in penalties. Below are the relevant details on how to handle driving without a license: First Scenario: If a motor vehicle driver allows someone without a motor vehicle driving license or whose license has been revoked or temporarily suspended to drive the vehicle, the driver's license will be confiscated, and the license may also be revoked. Second Scenario: Driving a motor vehicle without a license, or allowing someone without a license or with a revoked or temporarily suspended license to drive, will result in a fine ranging from 200 to 2000 yuan by the traffic management department of the public security authority, along with a 15-day detention. Special Notice: If a driver does not carry their motor vehicle driving license, regardless of whether they have violated any traffic laws while driving, they are not allowed to continue driving the vehicle. The traffic management department of the public security authority will impound the vehicle and request the driver to provide the license. Depending on the circumstances of the provided license, appropriate actions will be taken. If the provided license is genuine, legal, and no violations were committed while driving, a warning or fine will be issued, and the vehicle will be promptly returned.

13

2

Share

What are the differences between Sahara and Rubicon?

Here are the specific differences between Sahara and Rubicon: Ground clearance: The Sahara has a ground clearance of only 254mm, while the Rubicon reaches 274mm. Four-wheel drive system: Compared to the Rubicon, the Sahara adds a 4HAuto mode. This four-wheel drive mode is closer to the on-demand four-wheel drive system of urban SUVs, using a multi-plate clutch to control whether the four-wheel drive is disconnected. Front and rear axles: The Rubicon uses Dana front and rear axles that are more robust than those of the Sahara, and only the Rubicon provides front and rear differential locks.

3

5

Share

What brand is Goodyear tire?

Goodyear is a tire brand from the United States, established in 1898. The headquarters of The Goodyear Tire & Rubber Company is located in Akron, Ohio, USA. It is one of the world's largest tire production companies, manufacturing tires, engineered rubber products, and chemical products in multiple factories across various countries. International automotive brands that use Goodyear tires include Rolls-Royce, Mercedes-Benz, BMW, Audi, Volkswagen, General Motors, Ford, Chrysler, and Lexus, among others. The full English name of Goodyear is: Goodyear. The company is committed to the development of new products to meet market demands. Goodyear introduced pneumatic tires in 1899 and obtained a patent for tubeless tires as early as 1903. In 1909, it launched pneumatic tires for airplanes and trucks, and four years later, it introduced the Goodyear "airship" (a helium-filled airship used for promotional and military purposes). In 1917, Goodyear pioneered long-distance truck transportation services, known as "Wingfoot Express." In 1947, it introduced nylon cord tires, followed by polyester cord tires in 1962, which later became the industry production standard. Tires are the only components of a car that come into contact with the ground, affecting the vehicle's driving stability and safety. Tires are rubber products, and rubber products will age over time with prolonged use. Therefore, tires need to be replaced periodically. Generally, tires installed on a car can be used for four years. When purchasing new tires, it is essential to check the production date carefully. Typically, unused tires have a shelf life of three years. The production date of tires is usually marked on the sidewall, represented by four digits, such as 1719, indicating that the tire was produced in the 17th week of 2019. After replacing tires, it is necessary to perform dynamic balancing for each wheel to avoid abnormal vibrations during high-speed driving. Tips for selecting tires: For driving on national highways or expressways: - Braking distance at high speeds: To maximize safety, choose tires with the shortest braking distances on both dry and wet roads. - Comfort: For long-distance travel, select tire products that provide a comfortable ride (with minimal bumps and noise). - Performance: Opt for high-performance tires. For city driving: - Braking distance: To handle various urban driving hazards (such as pedestrians crossing the road), choose tires with the shortest braking distances on both dry and wet roads. - Long mileage life: The tread blocks of tires, which bear the engine power or braking force and contact the road, will deform and slide. Sliding and friction will wear out the tread rubber. Select tires with a longer mileage life. - Fuel economy: Tires with lower rolling resistance can significantly reduce vehicle fuel consumption. For daily use of Goodyear tires, pay attention to the following points: - Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread wears out, it will lose its drainage and anti-skid functions, significantly reducing the car's performance. Small cracks may pose a risk of tire blowouts during high-speed driving. Additionally, promptly remove pebbles from the grooves. - Park on flat ground as much as possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may cause rubber deterioration. After parking, drivers should not turn the steering wheel, as this action accelerates tire wear. - Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and tire pressure may increase. In such cases, stop to let the tires cool down. Never release air to reduce pressure or splash water to cool the tires, as this may cause abnormal aging of the tread rubber. - Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear due to dragging between the tires and the ground.

10

4

Share

Which Button is the Start-Stop Button?

Start button is located near the gear shift lever. The main positions and principles are as follows. Main position: The symbol for the engine start-stop button is a capital letter A with a circle around it. In most models, the automatic start-stop button is located near the gear shift lever or under the air conditioning panel, while in some models, it is near the ignition switch. Working principle of the start-stop system: When the vehicle stops due to traffic congestion or at an intersection, the driver presses the brake pedal and stops to shift gears. At this point, the start-stop system automatically detects. The wheel speed sensor of the anti-lock braking system shows zero. The electronic battery sensor indicates there is enough energy for the next start. When these three conditions are met, the engine will automatically stop running.

7

3

Share

How to Avoid Mistaking the Accelerator for the Brake While Driving?

Develop the habit of placing your right foot on the brake when not in use. Do not sit too close to the steering wheel. Stay focused. Gain a better understanding of the vehicle's structure and performance. Be cautious about the left-right reversal when reversing. Below is an introduction to the accelerator and brake in cars: Accelerator: The accelerator, also known as the throttle, is a control device that regulates engine power. It is part of the car's fuel supply system. By adjusting the pedal pressure, it controls the opening of the engine throttle, manages air intake, and allows the computer to regulate fuel injection, thereby controlling the engine's speed. Brake: The brake, also referred to as the stopping mechanism, is used to halt or reduce the speed of moving vehicles, locomotives, other transport tools, or mechanical equipment.

5

4

Share

Reasons Why the Brake Pedal of Volkswagen Lavida Cannot Be Depressed?

How to Distinguish Between Different Generations of Accord?

How to Deal with Driving Without a License?

What are the differences between Sahara and Rubicon?

What brand is Goodyear tire?

Which Button is the Start-Stop Button?

How to Avoid Mistaking the Accelerator for the Brake While Driving?

What is the best engine oil for Teana?

What brand is anttna tire?

How to Distinguish Between 1.5T and 1.5L

What procedures are required for transferring a vehicle across different regions?