Reasons Why a Van's Air Conditioning Doesn't Cool

1 Answers
AnnieAnn
07/29/25 5:17pm
Reasons: Refrigerant leakage; In such cases, you can replace the expansion valve and re-tighten the leaking high-pressure pipe connection. If the air conditioning compressor has been used for a long time and accumulated too much dust inside, it needs to be repaired at an auto repair shop. Methods for maintaining car air conditioning are as follows: Comprehensive inspection of the air conditioning: When using the air conditioning for the first time in summer, inspect the air conditioning system first. For example, check the refrigerant and whether the air conditioning filter is too dirty or if there are any foreign objects in the radiator through the liquid storage tank. Pay attention to air conditioning cleaning: The air conditioning filter should be replaced regularly. In environments with a lot of sand and dust or floating willow catkins, the filter can easily become contaminated, fostering bacterial growth and causing a musty smell in the air conditioning. Additionally, the condenser should be cleaned periodically, and the radiator should be removed for thorough cleaning. Turn off the air conditioning in advance: After parking, do not turn off the air conditioning immediately. Upon reaching the destination, most owners turn off the air conditioning and leave the car directly. Unlike in autumn and winter, the significant temperature difference between the inside and outside of the car in hot summer can cause the air conditioning system to become moldy, leading to the growth of mold. Therefore, owners should turn off the cooling a few minutes before reaching the destination, switch to natural air, allow the temperature in the air conditioning ducts to rise, eliminate the temperature difference with the outside, and maintain relative dryness in the air conditioning system to prevent mold proliferation.
Was this review help?
14
1
Share
More Forum Discussions

Are Car Cigarette Lighters Universal?

Car cigarette lighters are universal, but it is recommended that car owners choose the appropriate cigarette lighter to avoid abnormalities during use that may affect driving safety. When selecting a cigarette lighter, pay attention to its allowable current to prevent circuit overload during operation. Additional functions of car cigarette lighters: 1. While driving, if your phone runs low on battery, you can use the cigarette lighter to charge your phone, providing convenience for passengers; 2. It can convert the 12V power supply of the cigarette lighter into a 220V AC power supply to charge electrical devices such as laptops and electric fans; 3. By connecting to the car cigarette lighter, you can have hot water to drink while driving, especially in cold weather, making a car-mounted hot water cup more convenient.
15
0
Share

What does AC stand for in a car?

The A/C in a car refers to the air conditioning button. Here are some details about the air conditioning button: 1. A/C is the abbreviation for air conditioning. When this button is pressed and the light turns on, the air conditioning compressor starts working, and the air conditioning begins to cool. 2. In cars, since the heating function of the air conditioning is achieved through the heat from the engine coolant and the heating wires on the glass, A/C only refers to the cooling function. Additional information: There are two automatic modes for car air conditioning: one is AUTO plus A/C mode, and the other is AUTO plus ECO mode. The difference between them is: in AUTO plus A/C mode, the temperature inside the car can be adjusted to be either higher or lower than the outside temperature; in AUTO plus ECO mode, the temperature inside the car can only be higher than or equal to the outside temperature. Moreover, in A/C mode, since the car air conditioning compressor is always working, it will inevitably increase fuel consumption and engine load. In ECO mode, the car air conditioning compressor does not work.
10
0
Share

What is a Buffed Tire?

Buffed tires, also known as ground-off label tires, are tires where the white barcode located at the tire bead area has been removed. Here is some information about buffed tires: 1. Once the barcode is removed, the tire is no longer considered genuine, and the manufacturer is not responsible for any issues. 2. These are non-warranty products, typically factory-rejected tires with minor defects such as uneven rubber distribution, excessive dynamic balance deviation, or skipped stitches. Additional information: If you must purchase buffed tires, it is advisable to choose well-known brands, as their issues are often limited to excessive dynamic balance deviation, posing a lower risk of blowouts. However, with unbranded buffed tires, not only may there be dynamic balance problems, but there could also be issues like tire bulging.
12
4
Share

How to Test for Bad Car Bearings

Testing for damaged car bearings primarily involves the following methods: 1. While driving, listen carefully for any unusual noises. The most obvious sign of a bad front wheel bearing is abnormal sounds emitted after the car is in motion. 2. Rotate the tire with your right hand while placing your left hand on the shock absorber spring to sense vibrations. If the spring exhibits significant vibrations, it indicates bearing damage. This is because a damaged front wheel bearing increases friction, generating substantial heat immediately after driving. At this point, touching it by hand will feel scalding. Additional information: 1. The main functions of hub bearings are to bear loads and provide precise guidance for wheel rotation. They withstand both axial and radial loads, making them a crucial component. 2. Traditional automotive wheel bearings consist of two sets of tapered roller bearings or ball bearings combined. The installation, lubrication, sealing, and clearance adjustment of these bearings are performed on the automobile production line.
1
0
Share

When Should Spark Plugs Be Replaced?

The extent to which spark plugs need replacement: Severe damage to spark plugs, with phenomena such as blistering, black streaks, cracking, or electrode melting at the top. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them to assess their condition based on the following appearance colors. Normal spark plugs have a skirt insulator and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a skirt insulator that is reddish-brown, with an electrode gap between 0.8-0.9mm and no signs of electrode burning. If the spark plugs are covered in oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, with blistering, black streaks, cracking, or electrode melting at the top, the cause of the damage should be identified, the fault rectified, and new spark plugs replaced. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected for the spark plugs, the air-fuel mixture is too rich, or engine oil is leaking into the combustion chamber.
11
0
Share

What are the benefits of cleaning fuel injectors?

The benefits of cleaning fuel injectors are: 1. Restore engine power: Carbon deposits on fuel injectors can cause a significant decrease in engine power. After cleaning the fuel injectors, the engine power will be improved and restored to its optimal state. 2. Maintain smooth engine operation: When fuel injectors are not spraying fuel smoothly, the engine will experience noticeable vibrations during operation. Therefore, after cleaning the fuel injectors, the issue of engine vibration will be improved. 3. Reduce exhaust emissions: When fuel injectors malfunction due to carbon deposits, the mixing and combustion of the combustible gas mixture will be affected, leading to increased vehicle exhaust emissions. Thus, after cleaning the fuel injectors, the problem of vehicle exhaust emissions can be improved.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.