Reasons for Unstable Car Tire Pressure?

1 Answers
MacBarrett
07/30/25 4:47am
Here are the specific reasons for unstable tire pressure: 1. Seasonal factors: Thermal expansion and contraction in summer and winter lead to different tire pressures. 2. Load conditions: Tire pressure varies when the vehicle is empty, half-loaded, or fully loaded. 3. Tire condition: Severely worn tires and unworn tires have different pressures. Below is additional information on the hazards of unstable tire pressure: 1. Reduced braking: Decreased tire friction and adhesion affect braking performance. 2. Comfort: Causes steering wheel vibration and deviation, reducing driving comfort. 3. Accelerated wear: Speeds up localized wear of the tread pattern in the center of the tire.
Was this review help?
10
4
Share
More Forum Discussions

Is the 4G63 Made of Cast Iron?

4G63 is made of cast iron. It can be seen in the Mitsubishi Evo, the 4G63 is an automotive internal combustion engine, the engine used in the Evo. Here is more information about the 4G63: 1. Mitsubishi began designing and manufacturing automotive engines in 1964, and by the 1970s, it adopted a naming convention of "one digit + one letter + two digits." 2. In 4G63, the "4" represents the number of cylinders; 3. "G" stands for gasoline engine; 4. "6" is the engine family number; 5. "3" is the designation within the family.
8
2
Share

What does it mean when the engine RPM doesn't change with AC on?

When the engine RPM remains unchanged with the AC on, it's maintained by increasing the fuel injection duration of the engine injectors to stabilize idle speed. Here's a detailed introduction about automotive AC refrigerant charging: 1. Precautions: There are two methods of AC refrigerant charging - high-pressure side charging and low-pressure side charging. These are completely different methods, with one charging liquid and the other charging gas. High-pressure side charging is typically used for initial charging, which involves liquid and is faster and safer. Low-pressure side charging uses gas, with a slower charging speed, and is generally used for replenishment. 2. Determination method: If bubbles appear in the sight glass, it indicates the need for refrigerant charging.
16
0
Share

How to Set Up Automatic Folding for the Breeze Rearview Mirror?

The folding button for the Breeze rearview mirror is located on the door armrest. Press the switch to automatically retract the rearview mirror. Below are some related tips for using the rearview mirror: 1. Poor visibility in the rearview mirror after rain: Use the rearview mirror heating function and the method of raising and lowering the window. 2. Applying soap to the glass can significantly improve visibility in rainy conditions: Soap disrupts the surface tension of water. When soap molecules enter the water, their polar hydrophilic properties break the attraction between water molecules, reducing the surface tension and allowing water to spread evenly across the treated glass surface. 3. Regularly clean hydrophobic rearview mirrors: Hydrophobic rearview mirrors require a high level of mirror smoothness to effectively repel water. Therefore, during the rainy season, it is necessary to clean the exterior rearview mirror surface regularly.
17
4
Share

What is the fuel consumption of the Mondeo Zhisheng?

The fuel consumption of the Mondeo Zhisheng is 8.1 liters per 100 kilometers. Here is more information about the Mondeo Zhisheng: 1. Vehicle positioning: The Mondeo Zhisheng is a mid-size car under the Ford brand. 2. Powertrain: It is equipped with three engines in total, including a 2.0-liter naturally aspirated engine, a 2.0-liter turbocharged engine, and a 2.3-liter naturally aspirated engine. The 2.0-liter turbocharged engine delivers 240 horsepower and a maximum torque of 340 Nm, the 2.0-liter naturally aspirated engine produces 146 horsepower and a maximum torque of 184 Nm, and the 2.3-liter naturally aspirated engine generates 160 horsepower and a maximum torque of 205 Nm.
9
3
Share

Can a sedan run continuously for 4,000 kilometers?

A sedan can run continuously for 4,000 kilometers. Here are some precautions for long-distance driving: 1. Check the engine: If there are issues with the engine, it can endanger the driver's safety. The fuel system and intake system are the most prone to problems in the engine. Therefore, it is crucial to inspect the engine before embarking on a long journey. 2. Fluid inspection: Check various fluids such as engine oil, transmission fluid, power steering fluid, brake fluid, etc. Ensure all fluid levels are within the normal range, and top up if levels are too low. 3. Check the lights: Lights play a vital role in vehicle operation. Turn signals, low beams, high beams, fog lights, and width indicators each have their own functions, and the absence of any can affect driving safety.
18
5
Share

What is the Difference Between Genuine Leather and Synthetic Leather for Car Seats?

Here are the specific differences between genuine leather and synthetic leather for car seats: 1. Appearance: Genuine leather has no backing, while synthetic leather does; genuine leather has tiny pores. When you press the softer part with your thumb, many fine and uniform wrinkles will appear around the thumb, and they will disappear when you lift your thumb. Synthetic leather may not show wrinkles or may display coarse patterns, which do not disappear when the thumb is lifted. 2. Smell: Genuine leather has irregular grain patterns in different areas and emits a slightly fishy odor when sniffed, while synthetic leather has a plastic or rubber smell and uniform grain patterns throughout. 3. Stain Resistance: Genuine leather is less prone to staining compared to ordinary fabrics, cotton, or synthetic leather, and stains can be easily removed with a cleaning agent.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.