Reasons for the Tire Pressure Monitoring Light Illuminating in Volkswagen Lavida
1 Answers
Method to reset the tire pressure monitoring light in Volkswagen Lavida: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are three commonly used methods for tire pressure monitoring: Direct Tire Pressure Monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It then transmits the pressure information from inside the tire to a central receiver module via a wireless transmitter, displaying the tire pressure data for each tire. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Introduction to the Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the above-mentioned systems. It is equipped with direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system.