Reasons for the simultaneous illumination of ABS and brake warning lights

1 Answers
LeTaylor
07/28/25 4:25pm
Causes for the ABS and brake warning lights to illuminate simultaneously include dirty wheel speed sensors, severely worn brake pads, insufficient brake fluid, or alternator generating excessive/insufficient voltage. Below are specific solutions: 1. Dirty wheel speed sensor: Contaminated sensor or excessive measurement error; Solution: Clean or repair the sensor. 2. Severely worn brake pads: Brake fluid level decreases with pad wear, triggering the warning light when reaching critical level. Solution: Replace brake pads. 3. Insufficient brake fluid: Solution: Top up brake fluid. 4. Alternator generating abnormal voltage: Solution: Regulate alternator output.
Was this review help?
1
4
Share
More Forum Discussions

What to Do When the Wheel is Locked?

Solutions for a locked wheel: 1. Long-term parking: If the parking brake is applied when there is water in the brake drum after washing the car or rain, the wheel may lock up after prolonged parking. You can use the vehicle's power to move the tire; 2. Stuck brake master cylinder cup that does not return: The solution is to clean the entire brake system and replace the brake master cylinder cup; 3. Brake caliper not returning: This can be fixed by sanding and applying grease. If the caliper itself is faulty, it may need to be replaced; 4. Brake pads frozen due to ice: Use hot water to melt the ice or gently tap the brake drum with a blunt object like a hammer; 5. Overheating from prolonged braking causing the brake pads to not separate: Depending on the situation, the brake pads may need to be sanded or replaced.
20
2
Share

High Beam or Low Beam on Highways?

Highway high beam and low beam usage: 1. Because highways have central barriers with good light-blocking properties, and considering the high speeds on highways, low beams provide very limited visibility range - high beams are used in most situations; 2. It's advisable to briefly turn off high beams before overtaking to clearly indicate your position and overtaking intention to the vehicle ahead; 3. On some downhill sections, high beams from vehicles on the slope can affect oncoming traffic - in these cases when you notice oncoming vehicles flashing their high beams, switch to low beams. Automotive headlights, also known as vehicle front lights or LED daytime running lights, serve as the 'eyes' of a car. They not only affect the owner's external image but are also crucial for safe driving at night or in poor weather conditions.
5
0
Share

How to Start a Motorcycle Without a Battery?

Methods to start a motorcycle without a battery: 1. Use the kick starter lever to start the motorcycle; 2. If the motorcycle does not have a kick starter, you can engage the third gear with the clutch, push the motorcycle to its maximum speed, then release the clutch to start the engine; 3. Find a downhill slope, shift to third gear in advance, hold the clutch lever, increase the speed by going downhill, and then release the clutch—the motorcycle will usually start. Motorcycles are powered by gasoline engines and are two- or three-wheeled vehicles steered by handlebars. They are lightweight, flexible, fast, and widely used for patrolling, passenger and cargo transport, as well as for sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.
7
5
Share

How often should a car be started if left unused for a long time?

If a car is left unused for an extended period, it should be started for about 10 minutes once a week. When a car remains inactive for a long time, the engine oil stops flowing and fails to lubricate various components, leading to oxidation and rust. This can also affect the engine's normal operation after startup. Additionally, prolonged parking can drain the battery, making it difficult to start the car and causing the anti-theft system to malfunction. Precautions for long-term car storage: 1. Park the car on a flat surface to prevent tire deformation or uneven fluid distribution that may affect normal operation; 2. If possible, store the car in a garage or underground parking to avoid sun damage and protect the paint; 3. Before driving a car that has been unused for a long time, warm it up for about 10 minutes to ensure proper lubrication of all engine components.
6
4
Share

Is Frequent Oil Change Beneficial?

Frequent oil changes are not beneficial. The reason is that new engine oil is alkaline to neutralize acidic substances produced by sulfur in fuel and prevent engine damage from these acids. The alkalinity of engine oil is highest when unused and gradually decreases during use. Alkaline engine oil can actually harm the engine. The optimal performance period for high-quality engine oil is not at the beginning or end of its usage cycle, but rather in the middle phase. Changing oil prematurely means abandoning its peak performance stage. The most important and beneficial maintenance measure for the engine is not frequent oil changes, but choosing high-quality engine oil. Engine oil, also known as engine lubricant, performs functions such as lubrication, friction reduction, auxiliary cooling, sealing, leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the 'blood' of a car.
1
2
Share

Do new cars nowadays require a break-in period?

New cars nowadays still require a break-in period. With the advancement of automotive manufacturing technology, modern break-in procedures are significantly different from traditional methods. Vehicles now undergo cold running-in treatment before leaving the factory. Owners only need to remember key points during initial usage: 1. Regularly check tire pressure, coolant level, brake fluid level, and engine oil level; 2. Perform timely maintenance after the break-in period; 3. Avoid sudden acceleration, hard braking, and overloading. When descending long slopes, control speed appropriately and avoid sudden engine braking. For manual transmission vehicles, anticipate gear shifts in advance and avoid shifting at inappropriate speeds. For automatic transmission vehicles, strictly avoid coasting in neutral or prolonged use of S mode; 4. Regarding speed, do not exceed two-thirds of the maximum speed, and keep engine RPM below 3,000 to 3,500.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.