Reasons for the Motorcycle Speedometer Needle Not Moving

1 Answers
OKyle
07/29/25 2:43pm
There are several reasons why the speedometer needle does not move: 1. Reason one: The flexible shaft is broken or the square shaft end is severely worn. 2. Reason two: The worm gear pair at the input end is severely worn. 3. Reason three: The speedometer needle shaft is stuck. The methods to troubleshoot a motorcycle speedometer needle not moving are as follows: 1. Method one: If inspection reveals that the flexible shaft is broken, replace it with a new one. If the square head of the flexible shaft is worn and rounded, replace it with a new flexible shaft. 2. Method two: If inspection reveals severe wear on the worm gear pair, replace it with a new one. 3. Method three: If the needle shaft is stuck, repair it promptly.
Was this review help?
4
1
Share
More Forum Discussions

What type of engine oil is suitable for the Nissan Kicks?

Nissan Kicks can use mineral engine oil, as well as semi-synthetic engine oil. Here is more information about automotive engine oil: 1. There are three types of engine oil used in vehicles: mineral oil, semi-synthetic oil, and fully synthetic oil, each serving different purposes. 2. Compared to semi-synthetic and mineral oils, fully synthetic oil offers superior performance. It's important to note that the type of oil used should also be determined by the engine type in the vehicle. 3. If the vehicle is equipped with a naturally aspirated engine, mineral oil or semi-synthetic oil can be used. For turbocharged engines, semi-synthetic or fully synthetic oil is recommended.
14
0
Share

How to use the X-Trail manual-automatic transmission?

The method to use the X-Trail manual-automatic transmission is as follows: First, press the brake and pull the gear lever down to engage the "D" gear; then push the gear lever to the left, which will engage the manual mode. When you need to shift gears, push the gear lever forward (+) to increase the gear by 1, or pull it backward (-) to decrease the gear by 1. Here is more information about the transmission: 1. The manual-automatic transmission is a type of automatic transmission that adds the function of manual shifting on the basis of the automatic mode, with no significant difference in essence between the two. 2. In manual mode, when the vehicle speed decreases, the transmission will downshift but will not upshift automatically. To return to automatic mode, push the gear lever back to the right. Manual and automatic modes can be switched at any time without pressing the brake, and the throttle can also remain engaged.
2
4
Share

Can one ETC be used for multiple cars?

No, ETC is issued on a per-vehicle basis, requiring complete and consistent vehicle information for registration. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Expressways" issued by the Ministry of Transport, the following documents are required: the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (showing the most recent annual inspection stamp page). If applying on behalf of someone else, the original valid ID card of the agent is also required. For ETC applications through major bank branches, a debit or credit card from the respective bank is needed. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding with debit cards. ETC Deduction Principle: Expressways have one or more ETC lanes. Using dedicated short-range microwave communication between the vehicle's on-board electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, along with computer network technology for backend bank settlement, vehicles can pass through toll stations without stopping to pay bridge or road fees. This operates on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; users also enjoy a 5% discount on toll fees. Green and eco-friendly: Reduces noise and exhaust emissions by eliminating stops at toll stations. Reduced wear and tear: Saves costs by minimizing frequent starts and stops, lowering vehicle wear and fuel consumption; users also enjoy a 5% discount on toll fees. Improved efficiency: ETC lanes theoretically increase throughput by 2-3 times, making traditional ETC faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC. It also sets a target of 50% ETC usage rate for road passenger vehicles by 2020. Future possibilities: Beyond improving ETC installation convenience and passenger vehicle usage rates, future efforts will promote ETC use for trucks and explore deeper integration of ETC systems with smart transportation developments like vehicle-to-vehicle communication and vehicle-road coordination, offering comprehensive travel services to vehicle owners. This means more application scenarios will support ETC. ETC Usage Notes: The ETC transaction sensing range is 8 meters. If the vehicle ahead is stationary, maintain a distance of over 10 meters to prevent accidental payment for the preceding vehicle due to ETC device failure or absence. The recognition speed in ETC lanes is 20 km/h. Excessive speed may prevent reading vehicle device information, leading to failed deductions. Unauthorized removal or movement of the OBU device, or detachment/loosening of the ETC electronic tag, will render the tag invalid. It can be taken to the issuing bank or highway service office for inspection. Non-deliberate loosening or detachment only requires reactivation. Insufficient balance in a debit card bound to ETC may cause deduction failure. Follow on-site staff guidance to use manual MTC lanes with cash or card payment. Overly thick windshields may cause poor signal reception, especially for vehicles with replaced or modified windshields after accidents.
7
5
Share

Will a tire pressure of 2.8 cause a blowout on the highway?

Driving on the highway with a tire pressure of 2.8 bar will not cause a blowout. The maximum pressure a tire can generally withstand is around 3.5 bar. However, this value may vary depending on the brand. Usually, the maximum tire pressure the tire can handle can be seen on the sidewall of the tire. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases body vibration, indirectly affecting the lifespan of other components; Excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the car during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts. Methods for insufficient tire pressure: If no damage is visible, simply inflate to normal tire pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire shop promptly for repair and reinflation; If the tire pressure warning appears again after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel hub. It is recommended to check and replace the wheel hub.
18
2
Share

What are the three locks of the G-Class?

The three locks of the G-Class are the "center differential lock," "rear differential lock," and "front differential lock." Center differential lock: It enables a 50-50 power distribution between the front and rear axles, ensuring equal power to both. It is mostly used for mild and flat sandy terrains, but its drawback is that it may fail in situations with cross-axles. Rear differential lock: This lock is crucial. Since most hardcore off-road vehicles are four-wheel drives, the vehicle's center of gravity tends to shift backward in poor road conditions. With this lock, the two rear wheels achieve a rigid power connection, allowing the vehicle to move forward even if one wheel is off the ground. Front differential lock: This lock enables a rigid connection between the two front wheels, providing equal power output.
16
1
Share

Is the Tayron a FAW-Volkswagen or SAIC Volkswagen model?

Tayron is a model under FAW-Volkswagen, and it is a mid-size SUV. Tayron specifications: The length, width, and height of the Tayron are 4589 mm, 1860 mm, and 1660 mm respectively, with a wheelbase of 2731 mm. The Tayron is equipped with three engines: a 1.4-liter turbocharged engine, a low-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine. Tayron configurations: In terms of configurations, the entry-level 280TSI Comfort Smart Link version of the Tayron adds an 8-inch touchscreen entertainment information system, dual front USB interfaces, and ambient interior lighting compared to the current model, while removing the PM2.5 filtration device. The 280TSI Luxury Smart Link version adds a panoramic sunroof, one-touch start, and keyless entry for the entire vehicle on top of the base model. The 380TSI 4WD R-Line Smart Link version is equipped with a 9.2-inch touchscreen entertainment information system but no longer includes rain-sensing wipers.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.