···
Log in / Register

Reasons for the Malfunctioning Dashboard of Haval H6?

3 Answers
JoyLynn
07/29/25 9:55am
Haval H6 dashboard malfunction is caused by damaged dashboard lighting, short-circuited power supply wires, or blown power supply fuses. Dashboard repair methods: If the dashboard lighting is damaged, disassemble the dashboard. The lighting is usually located at the rear of the dashboard; replace the non-functioning lights. If the dashboard power supply wires are short-circuited, they must be replaced with new wires. If the dashboard power supply fuse is blown, simply replace it with a new fuse. Highlights of the Haval H6 model: The Haval H6 is positioned as an urban SUV, offering both two-wheel drive and four-wheel drive configurations. The H6 is built on a different platform compared to the previous H3 and H5 models. Its most notable feature is the use of a monocoque body. The four-wheel-drive version of the H6 employs an on-demand four-wheel-drive system. While this may somewhat affect off-road performance, it reduces body weight, improves fuel efficiency, and enhances ride comfort. As it is built on an entirely new platform, the two-wheel-drive version of the Haval H6 features front-wheel drive, which differs from the rear-wheel-drive setup of the H3 and H5 two-wheel-drive models.
Was this review help?
19
2
Share
HazelFitz
08/13/25 12:03pm
I bought a Haval H6 last year and it was running fine, but suddenly the dashboard went black and I couldn’t see the speed or fuel level, which scared me into pulling over. A friend suggested it might be a blown fuse, so I checked the corresponding position in the car’s fuse box—if it’s blown, just replace it with a new one. If it’s not the fuse, it could be poor wiring contact or a faulty dashboard, often caused by high electrical load or aging in common vehicles. I almost had an accident on the highway, so I rushed to the 4S shop for repairs. They expertly checked the ECU system and other potential issues to prevent bigger problems later. After the fix, everything was stable again. New car owners, don’t panic or skimp on repairs if this happens to you.
Was this review help?
20
0
Share
Expand All
DeTravis
10/06/25 8:37am
Having worked in car modification for many years, I've encountered dashboard failures quite a few times. For a Haval H6, start by checking the fuses located in the box under the steering wheel—replace them if they're blown. Next, test the battery voltage to ensure it's stable, as low power can cause system failures. If it's not a power issue, use a multimeter to check for short circuits or open circuits in the wiring, or the instrument control module might need replacement. Remember to disconnect the power to prevent static electricity before working, and if you're unsure, don't force it—take it to a professional shop for a diagnostic scan to read the fault codes. Regular maintenance of the electrical system helps prevent aging.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What type of engine oil does the Touareg use?

The Touareg uses 5W40 or 0W40 engine oil. There are two engine options for the Touareg: the 3.0-liter turbocharged engine requires 7 liters of oil, while the 2.0-liter turbocharged engine requires 5 liters. The 2.0-liter turbocharged engine delivers 245 horsepower and a maximum torque of 370 Nm, with a maximum power output achieved between 5,000 and 6,500 rpm and peak torque available from 1,600 to 4,300 rpm. It features hybrid injection technology and uses an aluminum cylinder head with a cast iron block. This engine is paired with an 8-speed automatic transmission. The 3.0-liter turbocharged engine produces 340 horsepower and a maximum torque of 450 Nm, reaching peak power between 5,300 and 6,400 rpm and maximum torque from 1,340 to 5,300 rpm. It employs direct fuel injection and utilizes an aluminum cylinder head and block. This engine is also matched with an 8-speed automatic transmission.
20
4
Share

Can a Ferrari Seat 4 People?

Ferrari can seat 4 people. Ferrari has launched a model called the GTC4LussoT, where the number 4 indicates it has four seats. Here are some extended details: Powertrain Configuration: This version of the supercar features turbocharging, but there is also another V12 version. This car is highly personalized and fully embodies the essence and character of a supercar. Its uniqueness is not only reflected in having four seats but also represents four-wheel drive and four-wheel steering. Details: The details are exceptionally well-designed. If you look at the middle and rear sections of the body, many people might think it's a shooting brake. Indeed, overall, the car's styling is very similar to a shooting brake. Although Ferrari does not name it as such, this title fits the Ferrari very well, perfectly showcasing the concept of bold individuality.
11
5
Share

How many kilometers can a Wrangler run on a full tank of gas?

The new two-door Wrangler is equipped with a 2.0T turbocharged engine and can run 800km on a full tank of gas. Performance: Despite weighing two tons, it can still deliver 265 horsepower. With a full tank, it can run 800km, and the maximum torque reaches 400 Nm. Additionally, the new two-door Wrangler comes with a new part-time four-wheel-drive system, making it exceptionally capable in off-road conditions. Both fuel economy and performance are excellent. Exterior: The two-door Sahara, though an off-road vehicle, fits seamlessly in urban environments. First, it features a full convertible design. The boxy body is rugged and bold, with a neatly designed grille and protruding fender-mounted turn signals.
3
3
Share

What is the speed limit on Shandong Rilan Expressway in 2021?

Speed limits vary by lane on expressways. The speed limits on Rilan Expressway are as follows: 1. Two lanes in the same direction: The minimum speed limit for the left lane is 100km/h, and for the right lane is 60km/h. 2. Three lanes in the same direction: The minimum speed limit for the leftmost lane is 110km/h, for the middle lane is 90km/h, and for the rightmost lane is 60km/h. 3. Special requirements: The maximum speed limit for small passenger vehicles is 120km/h, for other motor vehicles is 100km/h, and for motorcycles is 80km/h. When the lane speed limit differs from the road signs, the road signs shall prevail.
8
5
Share

Where is the Wrangler's air intake located?

Jeep Wrangler's air intake is generally positioned above the radiator at the front of the vehicle, featuring a flat opening facing forward. Below is additional information: Air intake volume: The required air intake volume varies with engine displacement. Larger displacement engines naturally require greater air intake volumes (assuming naturally aspirated engines). A larger air intake opening allows more air to be drawn in. The air intake refers to the opening of an air duct or similar structure that collects air through the vehicle's forward motion and directs it into the engine or ventilation system. Turbojet engine: The Mach number at the compressor inlet of a turbojet engine is approximately 0.4, with strict limitations on flow field non-uniformity. During flight, the intake duct must decelerate and pressurize high-speed airflow, converting kinetic energy into pressure energy. As flight speed increases, the pressurization effect of the intake duct becomes more significant, exceeding that of the compressor during supersonic flight. Therefore, the intake duct of supersonic aircraft plays a crucial role in enhancing flight performance.
5
5
Share

What Causes the Ticking Sound in a Scooter Engine?

Scooter engine ticking sounds can be attributed to the following two scenarios: 1. Piston slap noise: Piston slap noise typically occurs due to excessive clearance between the piston and cylinder. During the power stroke, the piston is subjected to high-pressure gas forces, causing it to oscillate and strike the cylinder walls, producing the sound. Additionally, piston reverse ovality, bent or twisted connecting rods, or excessive tightness in the piston pin and connecting rod bushings or big-end bearings can also lead to piston slap. 2. Connecting rod big-end bearing noise characteristics: A distinct continuous knocking sound during sudden acceleration is the primary feature of connecting rod big-end bearing noise. When the big-end bearing is severely worn, the engine produces noticeable noise at idle, and the sound intensifies under increased load.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.