Reasons for the malfunction of the Roewe RX5 air conditioning system

1 Answers
SanGraham
07/24/25 1:54pm
Reasons for the malfunction of the Roewe RX5 air conditioning system are as follows: 1. Condenser issue: Excessive dust accumulation on the condenser prevents heat dissipation, leading to air conditioning failure. Solution: It is recommended to clean the condenser. 2. If the compressor and both internal and external units are working, there may be a refrigerant leak or insufficient refrigerant in the air conditioning system. Solution: Add refrigerant to the air conditioning system as soon as possible. 3. The car air conditioning belt is too loose. Solution: Adjust the belt tension. 4. The compressor is damaged. Solution: It is recommended to send it to a 4S shop for repair or replacement of the compressor.
Was this review help?
14
0
Share
More Forum Discussions

How to Brake a Motorcycle Correctly?

Motorcycle braking methods: 1. When riding at high speed, the braking force on the front wheel must be greater than that on the rear wheel, and the front wheel braking force should not cause the front wheel to lock up; 2. When braking uphill, the front wheel braking force can be appropriately increased; 3. When braking downhill, the rear wheel braking force can be appropriately increased; 4. During emergency braking, the braking force should be slightly less than the force that would cause the wheels to lock up; 5. On slippery roads, the rear wheel should be braked before the front wheel. Always use both brakes simultaneously because the front brake is designed primarily to assist the rear brake in achieving effective stopping. Using only the front or rear brake alone will not achieve the shortest braking distance; combining both provides the best braking effect.
9
0
Share

What Causes Car Transmission Noise?

Car transmission noise can be caused by: 1. Worn or damaged bearings; 2. Loose transmission housing bolts; 3. Excessive clearance between the gearshift lever and shift fork groove in the transmission; 4. Long overdue transmission fluid change; 5. Use of inferior automatic transmission fluid; 6. Gear meshing clearance issues; 7. Gear tooth surface metal peeling, tooth breakage, or misalignment during assembly; 8. Water ingress into the transmission without timely repair. The transmission is a mechanism used to alter the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output and input shafts. It is categorized into stepped transmissions, continuously variable transmissions, and integrated transmissions.
3
0
Share

What is the length of the Rolls-Royce Phantom standard wheelbase version?

The Rolls-Royce Phantom standard wheelbase version has a length of 3552 millimeters, with dimensions of 5770 millimeters in length, 2018 millimeters in width, and 1648 millimeters in height. The long wheelbase version has a wheelbase of 3772 millimeters, with dimensions of 5990 millimeters in length, 2018 millimeters in width, and 1656 millimeters in height. The Rolls-Royce Phantom is a large luxury sedan, equipped with a 6.7-liter V12 twin-turbocharged engine across the entire lineup. This engine delivers 571 horsepower and a maximum torque of 900 Newton-meters, reaching its peak power output at 5000 revolutions per minute. The engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
17
3
Share

What is the small button inside the Audi R8 storage compartment for?

A small button inside the Audi R8 storage compartment is the P button, the parking button. Introduction to the P button: The P button can be pulled up or pressed down. It is similar to a traditional handbrake lever: pulling engages the brake, while pressing releases it. After pulling the P button, a red (P) indicator will appear on the dashboard, equivalent to the original handbrake braking. This P function must be manually activated. To release it manually, you need to press the brake pedal and push the P button downward. The P button can also be released by applying throttle: when the handbrake is engaged, if the car is in a driving gear (D, R, S), all doors are closed, and the seatbelt is fastened, applying throttle will automatically release the P function. Introduction to the A button (Auto Hold): The Auto Hold switch. The A button can only be pressed downward. It is a stateful button, similar to the AC (air conditioning) switch. Pressing it once turns on Auto Hold, indicated by the A button's light, and pressing it again turns it off. When Auto Hold is enabled, the car will automatically stop after braking to a complete halt in any gear, displaying a green (P) indicator on the dashboard. At this point, releasing the brake pedal will not cause the car to move. If you don't need to wait for a long time, there's no need to shift to neutral. If the car is in a driving gear (D, R, S), pressing the throttle will allow it to move. The purpose of Auto Hold is to eliminate the need for any manual actions from stopping to starting. It is a very useful feature during traffic lights or congestion. Therefore, the A button is not one that needs to be pressed frequently, nor should it be pressed after the car has come to a complete stop.
17
4
Share

Which company does the Qiantu K50 belong to?

Qiantu K50 is under the ownership of CH-Auto Technology and is a pure electric sports car. Taking the 2018 Qiantu K50 Standard model as an example, its body dimensions are: length 4634 mm, width 2069 mm, height 1253 mm, with a wheelbase of 2650 mm and a trunk capacity of 65 liters. The 2018 Qiantu K50 Standard model is equipped with a single-speed transmission for electric vehicles, with a maximum power of 320 kW and a maximum torque of 680 Nm. Both front and rear suspensions use double-wishbone independent suspension, the drive system is dual-motor four-wheel drive, and the tire specification is 235/35R19.
6
4
Share

Which Kawasaki models come in green?

Kawasaki ZXR250, ZX-6R, ZX-10R, etc. Below is additional information: About Kawasaki: Kawasaki is a motorcycle manufacturer from Japan. The H2 and H2R are Kawasaki's fastest and most powerful motorcycles. Supercharger Technology: With the addition of supercharger technology, the Kawasaki H2's engine can achieve higher air intake. The engine uses a mixture of gasoline and air as fuel. Increasing the fuel quantity allows the engine to deliver stronger power. The working principle of a supercharger system differs from turbocharging—superchargers have no lag, and supercharged engines provide smoother power output. However, supercharged engines lack the explosive force of turbocharged engines.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.