Reasons for the Buzzing Sound When Driving an Audi A3

What is the usage method of Pajero's differential lock?

The usage method of Pajero's differential lock is: shift to N gear, switch the Super Select 4WD gear to 4L gear rear differential lock button, and start the vehicle when all indicator lights are on. Different differentials adopt different locking methods. Common differential locks have several locking methods: forced locking type, high-friction self-locking type, jaw type, Torsen type, and viscous coupling type. The dimensions of the Mitsubishi Pajero are 4900mm in length, 1875mm in width, and 1900mm in height, with a wheelbase of 2780mm. In terms of power, this vehicle is equipped with a 3.0L naturally aspirated engine, with a maximum power of 128kW and a maximum torque of 255Nm, paired with a 5-speed automatic transmission.

20

2

Share

How to Turn On the High and Low Beams on the Volkswagen Lavida?

To turn on the high and low beams on the Volkswagen Lavida, follow these steps: On the left side of the steering wheel, there is a set of light combination switches. Rotating the switch forward one notch turns on the dashboard lights, another notch activates the low beams, and one more notch turns on the high beams. The Volkswagen Lavida is a compact car with dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, a wheelbase of 2688mm, a fuel tank capacity of 51 liters, and a trunk capacity of 510 liters. In terms of power, the Volkswagen Lavida is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.

17

3

Share

Is it necessary to warm up the car before starting?

It is not necessary to warm up the car before starting, but from the perspective of car maintenance and extending the car's lifespan, appropriate warming up is beneficial. The idling time during warm-up should not be too long. The important part of warming up is the slow driving after idling, because the engine is difficult to reach normal operating temperature during idling, and the oil in parts such as the transmission can only be fully lubricated when the car is moving. When a car is parked for a long time, various oils (such as engine oil, transmission gear oil, etc.) flow to the oil pan due to the Earth's gravity. At this time, if you drive directly, the car parts will wear more severely because they are not fully lubricated.

13

2

Share

How to Add Engine Oil to a Car?

To add engine oil to a car, follow these steps: 1. Place an old oil container under the oil pan at the bottom of the vehicle's engine compartment; 2. Use a wrench to unscrew the oil filter and remove it; 3. Slowly unscrew the oil pan's drain plug to release the old oil. After allowing sufficient time for drainage, reinstall the drain plug, ensuring not to overtighten it to prevent damage to the oil pan; 4. Once all the old oil has been drained, tighten the drain plug (not too tight), then pour the new oil into the engine and screw the oil filter back into place. Engine oil is the lubricant used by the engine, composed of base oil and additives. It is often referred to as the 'lifeblood' of a car, primarily containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers.

18

5

Share

How to Replace the Wipers on a Malibu?

The method to replace the wipers on a Malibu is as follows: First, remove the old wipers from the car. Lift the wiper arm, pull the wiper downward to remove it, then install the new wiper. Open the wiper clip, hook the wiper onto the hole above, thread the arm into the square hole of the wiper, and secure the wiper tightly. Finally, fasten the clip and press it firmly. The Malibu is a mid-size sedan with dimensions of 4855mm in length, 1854mm in width, and 1476mm in height, a wheelbase of 2737mm, and a curb weight of 1520kg. In terms of power, this car is equipped with a 1.5T turbocharged engine, delivering a maximum torque of 250Nm and a maximum power of 125kW, paired with a 6-speed automatic transmission.

16

5

Share

What are the reasons why the Kia K3 trunk cannot be opened?

The reasons why the Kia K3 trunk cannot be opened are: 1. The car is not unlocked. Simply unlock the vehicle to open the trunk normally; 2. The trunk latch is stuck. Just apply lubricant to the latch position for lubrication; 3. The trunk latch is deformed. In this case, repair or replace the new trunk. The Kia K3 is a compact car with a length, width, and height of 4660mm, 1780mm, and 1450mm respectively, a wheelbase of 2700mm, and a fuel tank capacity of 53l. In terms of suspension, the front suspension of the Kia K3 is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.

5

1

Share

Reasons for the Buzzing Sound When Driving an Audi A3

What is the usage method of Pajero's differential lock?

How to Turn On the High and Low Beams on the Volkswagen Lavida?

Is it necessary to warm up the car before starting?

How to Add Engine Oil to a Car?

How to Replace the Wipers on a Malibu?

What are the reasons why the Kia K3 trunk cannot be opened?

Where is the rearview mirror heating button on the MG5?

What is the solution for Honda CR-V P2647?

What does SVS mean when displayed on the car dashboard?

When did the Shanghai National V emission standard come into effect?