Reasons for Shaking When Starting in First Gear with a Cold Engine

1 Answers
LaKendra
07/30/25 7:57am
Causes of car shaking: 1. Excessive carbon deposits If there is severe carbon buildup in the engine cylinders, it can lead to spark plug blockage and valve blockage, directly causing the car to shake during idling. If the car's acceleration performance has significantly declined and the shaking is persistent, consider cleaning the engine cylinders. 2. Fuel supply system failure Unstable fuel pressure can easily cause fluctuations in the mixture concentration, not only resulting in shaking but also causing unstable idling. First, consider replacing the fuel filter, as prolonged use may clog the filter element. Then check the fuel pressure bypassing the fuel filter; if abnormal, it might be an issue with the fuel pump. 3. Aging engine mounts This is also a very common cause of shaking. If the engine shaking becomes increasingly severe but the power does not weaken accordingly, consider whether it is an issue with the engine mounts.
Was this review help?
10
3
Share
More Forum Discussions

What is the reason for the buzzing sound of the Nissan Patrol fuel pump?

The reasons for the buzzing sound of the Nissan Patrol fuel pump are: 1. Internal wear of the fuel pump; 2. Faulty fuel filter. Taking the 2018 Nissan Patrol as an example, it belongs to the large SUV category, with body dimensions of: length 5165mm, width 1995mm, height 1955mm, wheelbase of 3075mm, fuel tank capacity of 100l, and curb weight of 2537kg. The 2018 Nissan Patrol features a double-wishbone independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 4.0L naturally aspirated engine, delivering a maximum horsepower of 279ps, maximum power of 205kw, maximum torque of 394nm, and is paired with a 7-speed automatic transmission.
12
3
Share

How to reset the tire pressure warning light on the Tiguan?

The method to reset the tire pressure warning light on the Tiguan is: 1. Ensure all four tires have consistent pressure; 2. Press the tire pressure reset button located near the glove compartment; 3. Turn on the ignition and wait for a sound, then the tire pressure light will reset. Taking the 2021 Tiguan 2WD Comfort Edition as an example, its body dimensions are: length 4712mm, width 1839mm, height 1673mm, with a wheelbase of 2791mm, a fuel tank capacity of 60 liters, and a trunk capacity of 495 liters. The 2021 Tiguan 2WD Comfort Edition features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 186PS, maximum power of 137kW, and maximum torque of 320Nm.
9
5
Share

How many days after applying the film can you open the windows?

You can open the windows three days after applying the film. The functions of the film are: 1. Blocking ultraviolet rays; 2. Preventing vehicle scratches; 3. Reducing the temperature inside the car; 4. Anti-glare; 5. Maintaining glass clarity. Types of car films: 1. Ordinary film; 2. Explosion-proof film; 3. Sunscreen and heat insulation film. The structure of the film: wear-resistant layer, PET safety base layer, metal heat insulation layer, UV absorption layer. The steps for applying the film are: 1. Install interior protection for the vehicle; 2. Cut the car film according to the window size; 3. Clean the front windshield; 4. Use a heat gun to shape the film; 5. After the film is heated, perform fine trimming on the film.
18
3
Share

How to reset the F1 fault light on Suzuki DL250?

Suzuki DL250 fault light F1 needs to go to a professional organization to read the fault code after it lights up, find the fault cause and fault location before repairing. Here are the relevant introductions: 1. Use genuine parts: In the process of repairing the motorcycle, be sure to use genuine parts. If you use some inferior parts to save money, problems will appear after a short period of use. 2. Repair in time: When using the car at ordinary times, if the fault light appears on the dashboard, it should be repaired immediately. If you keep dragging on without repairing, it may eventually turn into a more serious fault, which will cost more to repair.
6
3
Share

What are the reasons for difficulty in starting a car in cold weather?

The reasons for difficulty in starting a car in cold weather are: 1. Excessive carbon deposits in the intake system and at the root of the intake valve, leading to a lean air-fuel mixture during cold starts; 2. Dirty throttle body, resulting in insufficient air intake; 3. The engine speed does not meet the required level; 4. High contact resistance in the battery connection wires, or insufficient battery charge; 5. Thick viscosity of the transmission lubricating oil, causing increased resistance in engine operation; 6. Insufficient compression pressure in the engine cylinders. The methods to address difficulty in starting a car in cold weather are: 1. Check the battery casing for any leakage of electrolyte. If there is leakage, replace the battery. If there is no leakage, clean the surface of the battery and the oxides on the battery terminals with hot water; 2. Clean the carbon deposits in the intake system and on the intake valve; 3. Replace the throttle body.
11
4
Share

Is it normal for a new car's windshield to have an oil film?

Under normal circumstances, the oil film on a 2-month-old new car should not be very severe. Here is detailed information about automotive oil films: 1. Wall-attached oil film: During cold starts, the engine speed is low, resulting in reduced air intake. The mixture density in the cylinder is lower, and factors such as turbulence level, uniformity of the mixture, cylinder wall temperature, and the temperature and pressure of the mixture at the end of compression are all relatively low, leading to poorer fuel evaporation. A significant portion of the fuel remains as an oil film on the intake tract walls, intake valves, and cylinder walls. 2. Others: The removal of old paint films can be done entirely or partially, depending on the extent of damage to the old paint film and the quality requirements for the new coating. For partial removal, the damaged areas can be addressed. Common methods for removing old paint films include manual paint removal, mechanical paint removal, and chemical paint removal, which are the most frequently used methods.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.