Reasons for Low Fuel Rail Pressure (P0087) in Magotan

2 Answers
ElijahAnn
07/25/25 2:43pm
Magotan P0087 low fuel rail pressure is most likely caused by a damaged fuel pump or high-pressure pump pressure sensor, excessive plunger wear or common rail pressure regulator failure, fuel line blockage, or excessive water content in the fuel leading to low rail pressure. Related information: 1. Fuel pump function: It draws gasoline from the fuel tank and delivers it to the carburetor float chamber through pipelines and fuel filters. It is precisely because of the fuel pump that the fuel tank can be placed away from the rear of the engine and below the engine. 2. Fuel pump classification: According to different driving methods, it can be divided into two types: mechanically driven diaphragm type and electrically driven type.
Was this review help?
9
4
Share
OCaden
08/11/25 9:11pm
I've driven similar cars before, and when encountering the P0087 code, it's necessary to consider what's going wrong with the fuel supply system. Common causes include an aging fuel pump that's no longer effective—if its speed is low or it lacks power, the fuel pressure drops significantly; a clogged fuel filter, where too many impurities obstruct fuel flow, naturally preventing pressure from rising; and a malfunctioning fuel pressure regulator, which, if unstable, results in low rail fuel pressure. Additionally, pipeline leaks are a major culprit—check for oil leakage signs at the fuel rail connections and injector seals, as even minor seepage can trigger a pressure warning. Sensor errors shouldn't be ignored either; for instance, if the pressure sensor sends false signals, the system may mistakenly judge the pressure as low. For a quick solution, it's advisable to first test the fuel pump voltage and check how long it's been since the filter was replaced. DIY repairs can be too risky, so it's best to take it to a professional shop for diagnosis. Replacement parts usually don't cost much, often just a few hundred bucks, but don't delay, to avoid stalling on the road.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What causes the Baojun 510 trunk to not open?

There are several reasons why the Baojun 510 trunk may not open: 1. The trunk door may be blocked or stuck. 2. There may be aging or breakage issues in the internal mechanical structure. Below is an introduction to the trunk: 1. The basic structure of the trunk consists of two core shaft drive rods. The drive rod, through the main shaft drive, is composed of an inner tube and an outer tube, where the motor and gears inside the inner tube drive a threaded main shaft that moves along a threaded nut fixed to the inner side of the outer tube. 2. The electric strut uses an electric main shaft located inside the motor within the strut to open and close the trunk lid, with springs also assisting in the lid opening operation.
13
0
Share

How to Open the Front Hood of a Haval H6?

The method to open the front hood of a Haval H6 is to locate the hood release lever under the left side of the dashboard, pull it to release the hood, and then lift the hood upwards to open it. Below is an introduction to the Haval H6: 1. The Haval H6 is a compact SUV with a body size of 4615mm in length, 1860mm in width, and 1720mm in height, a wheelbase of 2680mm, a fuel tank capacity of 58 liters, and a curb weight of 1675kg. 2. The Haval H6 features a MacPherson strut front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5T turbocharged engine that delivers a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 6-speed manual transmission.
14
5
Share

What is the appropriate tire pressure for an Audi Q5?

Audi Q5's original factory tire pressure standard is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. Method to check tire pressure in Audi Q5: Start the car and enter the interior; locate the central display screen inside the car and touch the left 'cae' button; enter the relevant menu information in the vehicle settings, select 'Tire Settings' in the vehicle settings options; within the tire settings, click on 'Tire Monitoring' to view the tire pressure. If the tire pressure monitoring indicator lights up (a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, containing an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Typically, it will alert if the pressure is below 1.8 bar or exceeds 3.0 bar. At this point, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure reset is not performed promptly, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor. The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. For sensor damage issues, only replacement with a new component is possible.
8
4
Share

Why Does the Toyota Alphard Have Two Logos?

This is primarily because the Alphard is an imported model, and some imported Toyota vehicles feature one logo at the front while displaying the Toyota logo at the rear. Below are the differences between the two logos on the Alphard: 1. The rear logo is the Toyota emblem, while the front α logo is exclusive to the Alphard, Toyota's luxury MPV, which holds the title of 'King of MPVs' in China. The logo is derived from the Latin letter α. 2. In the Japanese market, the Toyota Alphard is divided into the Alphard and Vellfire versions. Both versions share identical configurations, pricing, and interiors. However, due to their positioning as premium vehicles, each adopts its own exclusive logo.
15
4
Share

What is the wheelbase of the Dongfeng Fengxing SX6?

Fengxing SX6 has a wheelbase of 2750mm. Here is the related introduction of Fengxing SX6: 1. The length, width, and height of Fengxing SX6 are 4660mm, 1810mm, and 1790mm respectively. 2. Fengxing SX6 is a compact SUV under Dongfeng Fengxing, adopting a front-engine, front-wheel-drive layout, and is available in both China V and China VI versions. 3. It is equipped with two power configurations: 1.6L and 1.5T, with 3 new models added, totaling 5 models with 2 different appearances. 4. It offers features such as an 8-inch central control screen, car Bluetooth, mobile phone connectivity, rearview mirror heating, independent front and rear air conditioning, and an electric sunroof. In terms of safety configurations, the new car comes standard with ABS, brake assist, body stability system, as well as rear parking radar and rearview camera.
11
2
Share

How to Deactivate the Anti-Theft System on a Buick Regal?

Turn on the ignition to activate the anti-theft system, then wait until the anti-theft light flashes before turning off the ignition. Finally, turn it back on, wait for ten minutes until the anti-theft light flashes again, and then turn off the ignition. Repeat this process three times to deactivate the anti-theft system. Here is some information about car anti-theft systems: 1. A typical car anti-theft system includes an integrated chip with some switch gates. When an external trigger voltage is applied, the switch gates open and output a positive voltage to the drive circuit, which then activates the actuator and alarm circuit. 2. The radio remote control is a crucial component of the anti-theft system. It is a remote control device that uses radio signals to control various mechanisms from a distance.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.