Reasons for Inability to Schedule Subject 4 Exam on 12123 Platform

What does 'Lian Dong Yun please check the brake light' mean?

Daytime running lights, as the name suggests, are lights that can be used during daytime driving. If a car is equipped with daytime running lights, they will illuminate when the car is powered on. Daytime running lights can effectively reduce the probability of accidents. The commonly used lighting systems in cars include turn signals, headlights, daytime running lights, and brake lights. Both brake lights and turn signals are related to safety. The functions of various car lights are introduced as follows: Brake lights: When the driver steps on the brake pedal, the brake lights at the rear of the car will illuminate, alerting the drivers behind to slow down and maintain a safe distance. Turn signals: When turning or changing lanes, turn signals should be activated in advance to alert the drivers behind. Headlights: Headlights provide illumination at night, lighting up the road ahead. They are crucial for nighttime driving. If the headlights are damaged, they must be repaired promptly.

20

5

Share

What Does 20 Liters per 100 Kilometers Mean?

20 liters per 100 kilometers means that the car consumes 20 liters of gasoline for every 100 kilometers driven. The following are specific reasons for high car fuel consumption: 1. Affected by temperature: It causes fluctuations in fuel consumption. In winter, when temperatures are low, fuel consumption tends to increase. 2. The vehicle has not been maintained for a long time: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil causes poor lubrication, increasing the resistance of various moving parts in the engine, requiring more energy to overcome the resistance, which in turn increases fuel consumption. 3. Insufficient tire pressure: Insufficient tire pressure increases the contact area between the tires and the ground, increasing friction, which means greater driving resistance and higher fuel consumption. 4. Excessive carbon buildup in the vehicle: Carbon buildup can occur in the throttle body, fuel injectors, intake ducts, and piston tops. Excessive carbon buildup in any of these areas can lead to incomplete combustion, resulting in increased fuel consumption.

1

2

Share

How far can a full tank of CFMOTO 650nk go?

This motorcycle has a fuel consumption of approximately 6 liters per 100 kilometers, with a fuel tank capacity of 17 liters. Therefore, a full tank can generally travel about 270 kilometers. This is not absolute, as the actual distance depends on the rider's driving habits and road conditions. The 650nk is a street sports bike under CFMOTO, equipped with a 649.3cc twin-cylinder water-cooled electronic fuel injection engine. This engine delivers a maximum power of 52kW and a maximum torque of 62Nm, with peak power achieved at 8,500 rpm and peak torque at 7,000 rpm. The motorcycle features a 6-speed transmission. The CFMOTO 650nk measures 2,120 mm in length, 780 mm in width, and 1,100 mm in height, with a wheelbase of 1,415 mm. It has a fuel tank capacity of 17 liters and a top speed of 200 km/h.

3

1

Share

What is the W gear in an automatic transmission?

The W gear in an automatic transmission is the snow mode, used for starting on slippery surfaces. It generally limits torque to second gear, providing less power than first gear to prevent wheel spin. Many cars are equipped with options for both sport mode and snow mode, allowing drivers to choose the appropriate driving mode based on environmental conditions to balance driving enjoyment and safety. Automatic transmission cars also feature various gear positions denoted by letters such as P, R, N, D, S, M, and L. Here’s an explanation of each: P (Parking): The parking gear is used when the vehicle is parked for an extended period. Ensure the vehicle is completely stopped before shifting into P to avoid damaging the transmission. Engaging P locks the wheels mechanically, preventing movement, especially useful on slopes. Avoid using P during short stops (e.g., at traffic lights) to prevent transmission damage in case of a rear-end collision. R (Reverse): The reverse gear is used for backing up. Press the shift lock button to engage R, but only after the vehicle has come to a complete stop to avoid transmission damage. N (Neutral): Neutral disengages the transmission from the wheels. Use it during short stops with the brake pedal pressed. For longer stops, engage the parking brake. Note: Coasting in N to save fuel is a misconception and can damage the transmission. D (Drive): The drive gear is for forward motion. The transmission shifts automatically based on speed and throttle input. While you can stay in D with the brake pressed at traffic lights, prolonged use may increase transmission fluid temperature. S (Sport): Sport mode delays gear shifts for increased power, ideal for overtaking. M (Manual): Manual mode allows drivers to shift gears manually, similar to a manual transmission. L (Low): Low gear restricts the transmission to lower gears (equivalent to 1st gear in a manual), providing high torque for climbing or descending steep slopes. It reduces reliance on brakes during long descents, preventing brake overheating.

15

3

Share

What are the main aspects of car maintenance?

Car maintenance primarily involves the five oils, three fluids, and tires. The five oils refer to gasoline, engine oil, transmission fluid, power steering fluid, and brake fluid. The three fluids refer to coolant, windshield washer fluid, and battery fluid. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Routine maintenance, or regular maintenance, refers to the operations performed before driving, during driving, and after parking, which are carried out by the driver. The main tasks of a maintenance center are cleaning, replenishment, and safety inspections, which are routine and necessary work to maintain the vehicle's normal working condition. Primary maintenance is performed by professional maintenance companies. In addition to routine maintenance tasks, the main tasks of the service center are cleaning, lubrication, and tightening, as well as inspecting safety components such as brakes and operations. Secondary maintenance is performed by professional maintenance companies. In addition to primary maintenance, the main tasks of the service center are inspection and adjustment, tire disassembly and inspection, and tire replacement.

17

4

Share

What is the real fuel consumption of the new Santana 1.5?

The new Santana 1.5L has a total of 4 models, including the Santana 2021 1.5L Manual Comfort Edition, Fashion Edition, Automatic Fashion Edition, and Comfort Edition. These models equipped with a 112 horsepower engine have an NEDC fuel consumption of 5.6L per 100 kilometers. The fuel tank capacity of different models of the new Santana 1.5L is the same. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 112 horsepower engine, the fuel tank capacity is 52.8L, and the distance that can be covered with a full tank is 52.8/5.6*100=943km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

17

1

Share

Reasons for Inability to Schedule Subject 4 Exam on 12123 Platform

What does 'Lian Dong Yun please check the brake light' mean?

What Does 20 Liters per 100 Kilometers Mean?

How far can a full tank of CFMOTO 650nk go?

What is the W gear in an automatic transmission?

What are the main aspects of car maintenance?

What is the real fuel consumption of the new Santana 1.5?

What Does a Tidal Lane Look Like?

What are the precautions for the first charging of BYD Han?

Correct Operation of CVT Automatic Transmission?

How is the driving experience calculated when adding a C1 license to a motorcycle license?