Reasons for Hitting the Left Corner When Reversing into the Right Parking Space

1 Answers
LeAriel
07/29/25 9:26am
Here is a detailed introduction to the reasons for hitting the left corner when reversing into the right parking space: 1. The wheel runs over the right front corner during reversing; There are two reasons for this situation. The first is that the car body is not aligned properly when parking, and the distance between the rear of the car and the parking space is closer than normal. At this time, when performing the reversing operation, the longitudinal distance between the rear of the car and the parking space will become smaller and smaller. The second reason is that although the car body is aligned, the timing of turning the steering wheel is too early, and no timely adjustment is made afterward, which can also cause the problem of hitting the corner. 2. The wheel runs over the left front corner during reversing: The car body is not aligned properly. This results in the rear of the car being farther from the parking space than normal when parking. 3. The rear of the car sweeps the left or right boundary line of the parking space: The rear of the car sweeps the right boundary line of the parking space. The timing of straightening the steering wheel when entering the parking space is slightly late. If the rear of the car sweeps the left boundary line of the parking space, it means the steering wheel was straightened too early when entering the parking space.
Was this review help?
4
0
Share
More Forum Discussions

Is the Lincoln handbrake for automatic transmission?

Both manual transmission and automatic transmission Lincoln vehicles are equipped with a handbrake. Manual transmission usage method: Try to press the handbrake button while pulling the handbrake. When pulling the handbrake, the button on the brake head will move back and forth, and there is a spring inside exerting force; apply gentle force when pulling the handbrake. Do not suddenly yank the handbrake up, as this can damage the brake over time. The correct method is to pull the brake gently and smoothly, clearly hearing the clicks of the brake engaging. Automatic transmission gear introduction: P stands for Park, used when parking; R stands for Reverse, the gear used when backing up; N stands for Neutral, used for brief stops; D stands for Drive, where the transmission automatically shifts between 1st and 5th gears based on speed and throttle conditions; S stands for Sport mode; M refers to the manual mode in a manual-automatic transmission or the simulated manual mode in a CVT transmission. L stands for Low gear.
3
5
Share

How much does the BYD F6 weigh?

1435 kg. Common curb weights of sedans above 2.0L: Crown 3.0 (1650kg), Reiz 2.5 (1560kg), Camry 2.4 (1530kg), Accord 2.4 (1447kg), Mazda6 2.3 (1437kg), Teana 2.3 (1545kg). Classification: According to Chinese mainland standards, they are divided into: mini cars (displacement below 1L), compact cars (displacement 1.0-1.6L), midsize cars (displacement 1.6-2.5L), executive cars (displacement 2.5-4.0L), and luxury cars (displacement above 4L).
4
1
Share

Which BYD model can travel 1200 kilometers on a full tank of fuel?

The model is the BYD Qin Plus DM-i. Introduction to the Qin Plus DM-i's powertrain: The BYD Qin Plus DM-i is the world's only oil-electric hybrid primarily powered by electric drive. As the first model equipped with DM-i platform technology and primarily electric-driven, it features the "Blade Battery," a lithium iron phosphate battery with a minimum capacity of 8.5kWh. This makes it one of the models with the largest battery capacity among genuine oil-electric hybrid vehicles globally, which is why BYD confidently claims that the Qin Plus DM-i is primarily electric-driven. Fuel consumption of the Qin Plus DM-i: More fuel-efficient (DM-i, plug-in hybrid), quieter (NVH at electric vehicle levels), better performance (0-100 km/h acceleration comparable to a 2.0T engine), sporty design (no explanation needed), and more reliable mechanical quality (no transmission). Naturally, it is an excellent A-segment car, even surpassing some B-segment models. BYD's strength lies in these solid capabilities, making the Qin worthy of being called an outstanding A-segment car.
9
5
Share

What does the car seat ventilation symbol look like?

The symbol is a seat with a fan above it. Here is relevant information: 1. Principle: Seat ventilation involves designers using fans to inject air into the seat, which then flows out through small holes on the seat surface, achieving ventilation. When a passenger sits on the seat, the back of the body is in close contact with the seat surface, preventing air circulation in the contact area, which hinders sweat evaporation and causes discomfort. 2. Advantages: The ventilation function effectively improves the air circulation environment between the body and the seat surface, ensuring that even after prolonged sitting, the contact area remains dry and comfortable. Seat ventilation is achieved by adding fans to the back of the seat cushion and backrest foam, which draw in air and direct it into the ventilation layer.
12
5
Share

What is the motor power of the WM EX5?

The motor power of the WM EX5 is 160 kW. Below are the specific details of the WM EX5: 1. Configuration: Standard features include a full LCD instrument panel, a 12.8-inch floating central control screen, one-key start, dual-zone independent air conditioning, and a CN95 micron air filtration system. In terms of safety configurations, the new car is equipped with an ESP electronic stability system, a tire pressure monitoring system, a parking radar system, etc. 2. Power: The WM EX5 uses a permanent magnet synchronous motor with a total motor power of 160 kW, a maximum torque of 315 Nm, and a maximum motor horsepower of 218 hp. 3. Charging: Equipped with a ternary lithium battery, it supports fast charging with a minimum charging time of 0.5 hours and slow charging with a minimum time of 8.4 hours.
20
1
Share

Can BYD be exchanged for a new car?

BYD can be exchanged for a new car. The required documents include the original ID card and its copy, the original vehicle purchase invoice or the last transfer invoice and its copy, the original vehicle registration certificate and its copy, and the original vehicle license. Conditions: First, the procedures must be complete: Before going to the 4S store for exchange evaluation, you must first check whether the vehicle's procedures are complete. The procedures include the original ID card and its copy, the original vehicle purchase invoice or the last transfer invoice and its copy, the original vehicle registration certificate and its copy, and the original vehicle license. Second, understand the vehicle price: Before the exchange, first check the general situation of used car prices on the Internet or the used car market as a reference, and then you can go to a professional used car brokerage company or 4S store for an actual evaluation. Third, don’t be impatient: Nowadays, 4S stores no longer directly purchase used cars but only help consumers sell their vehicles, making the 4S store a consignment platform. Precautions: Check whether the frame number matches the registration certificate, qualification certificate, and factory certificate, and whether there is any difference in the factory time marked on the glass. Under good lighting conditions, carefully check whether there are any scratches on the body. Test the wipers, window lifting, audio, lights, air conditioning vents, radio, navigation, central control buttons, steering wheel buttons, etc., and try to check the working condition of the equipment as much as possible. Check whether the onboard tools are complete (jack, dismantling tools, warning triangle, etc.) and whether the spare tire is in normal condition. Carefully inspect the engine throttle, brakes, gear shifting, steering wheel, etc., and if conditions permit, take a slow lap around the 4S store.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.