Reasons for Battery Warning Light Illumination in Rainy Weather

2 Answers
Mabel
07/28/25 7:45pm
Here are the reasons and solutions for the battery warning light illuminating in rainy weather: 1. Battery malfunction: Such as depleted battery charge or battery failure. Solution: Use a multimeter to test the battery voltage; recharge if the voltage is low, replace if the battery is faulty. 2. Battery terminal issues: Loose connections or oxidation leading to poor contact can also trigger the battery light. Solution: Clean and tighten the battery terminals. 3. Alternator malfunction: Faulty voltage regulator or excitation circuit issues causing abnormal operation may illuminate the battery light. Solution: Troubleshoot the alternator.
Was this review help?
10
2
Share
VonAmelia
08/12/25 12:38am
I've noticed that battery warning lights often come on during rainy days, mainly because rainwater seeps into the vehicle's wiring, causing short circuits or poor connections. Simply put, the battery light indicates a problem with the charging system. High humidity during rainy days can lead to rust and corrosion at electrical connections—for example, when water gets into the battery terminals or generator connections, sensors may falsely report low voltage. While driving, it's best to pay attention: if the light comes on during heavy rain, don't panic. First, check if the wipers and headlights are functioning properly—if other electrical systems also fail, it's likely due to overall circuit moisture. I recommend applying some insulating tape to wire connections before each rainy season to prevent moisture and corrosion, or visit a repair shop to check the generator's voltage. Don't wait for major issues to arise—safe driving is key! Remember to maintain the battery regularly, clean the connections, and reduce the risk of malfunctions, especially during the rainy season.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What are the reasons for the weak acceleration of Kia K2?

The reasons for the weak acceleration of Kia K2 are as follows: 1. Carbon deposits inside the engine: Carbon deposits on the throttle valve, idle speed motor, intake tract, combustion chamber, and spark plugs can easily lead to weak acceleration. 2. Heavy traffic: Driving for a long time in congested areas with frequent acceleration and deceleration can also cause the car to feel sluggish when driving again. 3. Poor fuel quality: The use of low-quality fuel affects the gasoline filter and fuel lines, significantly leading to poor fuel supply, resulting in weak acceleration. 4. Exhaust system failure: Exhaust system failure is mainly due to poor exhaust flow, usually caused by a broken catalytic converter. A blocked exhaust pipe can also reduce engine power. 5. Insufficient tire pressure: When the tire pressure is insufficient, it can also cause the car to feel sluggish during acceleration.
14
3
Share

What is the OnStar vehicle document number?

It is the owner's ID number or the vehicle identification number. OnStar vehicle identification number: The vehicle identification number used is the frame number of the motor vehicle, which is a 17-digit identification code on the vehicle. The identification code is marked on the motor vehicle driving license and the motor vehicle conformity certificate. It can be directly looked up and used when registering for OnStar, which is very simple. Introduction to the OnStar system: It is a wireless service device, established by a company jointly funded by General Motors, SAIC Group, and Shanghai General Motors. The company is named OnStar Information Service Co., Ltd. The products it produces are mainly provided for the models manufactured by SAIC General Motors and also serve as a unique brand safety information service platform.
8
2
Share

Is the Vellfire a Domestic Car?

The Vellfire is not a domestic car. The Vellfire is an MPV model under Toyota, with dimensions of 4975mm in length, 1850mm in width, and 1945mm in height, and a wheelbase of 3000mm. The Vellfire features a front-engine, four-wheel-drive layout, with a front suspension type of MacPherson independent suspension and a rear suspension of double-wishbone with a stabilizer bar. In terms of power, the Vellfire is equipped with a naturally aspirated engine, delivering a maximum horsepower of 117, a maximum torque of 198 Nm, a maximum power of 86 kW, a maximum power speed of 4700 rpm, and a maximum torque speed ranging from 2800 to 4000 rpm.
2
0
Share

Can a newly purchased three-wheeled motorcycle be driven on the road?

A newly purchased motorcycle that has not completed registration or obtained a temporary license plate is not allowed on the road. Introduction to the three-wheeled motorcycle: The three-wheeled motorcycle is a type of motorcycle that has two rear wheels symmetrically distributed with the front wheel and only a driver's seat. Approved seating capacity of the three-wheeled motorcycle: The cab of the three-wheeled motorcycle is approved for one driver; when the cargo compartment has fixed seats arranged longitudinally (in the same direction as the vehicle's forward movement) (with seat cushion depth ≥400mm and a distance from the driver's seat ≥650mm), one person is approved per 400mm of seat cushion width, but no more than two people; when the above conditions are not met, the cargo compartment is not approved for any passengers.
6
2
Share

Why does the battery light keep flashing in a new car?

Reasons for the battery light continuously flashing in a new car include battery failure, loose or oxidized battery terminals, and a loose tensioner pulley. The main reasons for the constant illumination of the battery light in a Haval H6 are as follows: Battery failure: Such as depleted battery charge or battery failure. The solution is to use a multimeter to test the battery voltage; if the voltage is low, recharge it. If the battery is faulty, replace it. Loose or oxidized battery terminals: Poor contact can also cause the battery light to illuminate. The solution is to clean and tighten the battery terminals. Loose tensioner pulley: A loose alternator belt or tensioner pulley can cause the charging system to malfunction, resulting in the battery light turning on. The solution is to replace the belt or adjust the tensioner pulley.
7
2
Share

What is the Difference Between Auto Hold and Electronic Parking Brake?

The differences between auto hold and electronic parking brake are: 1. Different functions: Auto hold is an extension of ESP, which allows the driver to avoid prolonged braking when the vehicle is stopped, preventing unnecessary sliding of the vehicle; electronic parking brake is a technology that achieves parking braking through electronic control, working by generating friction between the brake disc and brake pads to control parking braking. 2. Different braking: Auto hold is temporary braking; electronic parking brake is long-term braking. The functions of auto hold are: 1. In situations requiring short stops such as traffic lights, the system will automatically brake the wheels after the vehicle comes to a stop to prevent rolling; 2. During uphill starts, the system will automatically brake to prevent rolling backward. The usage method of electronic parking brake is: 1. Press the electronic parking brake to stop braking; 2. Lift the electronic parking brake to start braking.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.