Reasons for Abnormal Noise When Depressing the Clutch

2 Answers
MacTaylor
08/26/25 3:02am
Here are the reasons for abnormal noise when depressing the clutch: 1. Worn clutch disc. 2. Broken clutch pressure plate spring. 3. Loose release bearing. 4. Lack of lubricant. Here are the solutions for abnormal noise when depressing the clutch: 1. Replace the clutch disc. 2. Replace the clutch pressure plate spring. 3. Adjust the release bearing. 4. Replenish lubricant. Here is how the clutch works: 1. When starting the vehicle, depressing the clutch separates the pressure plate from the friction disc, at which point the pressure plate does not contact the flywheel. 2. When the vehicle is in normal operation, the pressure plate tightly presses against the flywheel's friction disc, creating significant friction between the pressure plate and the friction disc, maintaining relative static friction between the input and output shafts, with both rotating at the same speed.
Was this review help?
5
0
Share
OCorey
09/08/25 3:16am
I've experienced the issue of hearing abnormal noises when stepping on the clutch pedal several times, and there are quite a few potential causes. The most common one is a faulty clutch release bearing - when you press down, it can produce squeaking or chirping sounds due to bearing wear or insufficient lubrication. Another possibility is that the clutch disc itself has become loose or worn thin, causing friction noises during operation. Additionally, the mechanism under the clutch pedal might be rusted or in need of lubrication, resulting in creaking sounds. Don't overlook potential pressure plate issues either - a warped pressure plate can make clutch operation harder and generate abnormal noises. My suggestion is to first identify where the sound is coming from. If it's a continuous noise, it's likely the bearing; if intermittent, it might be disc-related. Get it fixed promptly because minor issues can escalate - complete clutch failure would be troublesome. For daily driving, practice gentle pedal operation and perform regular maintenance checks on lubrication to extend lifespan. Remember, never ignore abnormal noises, especially during frequent clutch use in traffic jams when problems are more likely to occur. Taking it to a reliable repair shop for inspection is always the right move.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

How to reset the tire pressure light on the Volkswagen New Sagitar?

Method to reset the tire pressure light on the Volkswagen New Sagitar: First, press and hold the tire pressure monitoring switch for more than 3 seconds until you hear a beep, then the tire pressure warning light on the dashboard will turn off. Next, turn on the ignition and press the reset button on the instrument panel until the tire pressure light goes out. The body dimensions of the Volkswagen New Sagitar are 4753 mm in length, 1800 mm in width, and 1462 mm in height, with a wheelbase of 2731 mm. The Volkswagen New Sagitar features front-wheel drive, a front MacPherson strut independent suspension, a rear multi-link independent suspension, and a unibody structure.
1
3
Share

Is It Safe to Install a One-Button Start at a 4S Shop?

Installing a one-button start is not safe. Here are the specific reasons: Modification of the original car wiring: To install a one-button start, the original car wiring must be modified, and any modification to the original wiring poses safety risks. Failure of the anti-theft system: Moreover, installing a one-button start requires adjusting the steering lock to a permanently open state, meaning the steering lock becomes ineffective. After the installation, the electronic chip anti-theft system will also be in a failed state. If the installed one-button start system is removed, the car can be driven away immediately because it no longer has mechanical or electronic chip anti-theft protection.
15
1
Share

Why Does My Car Smell Strongly of Gasoline When Starting?

Common reasons for a strong gasoline smell when starting the car include: 1. Insufficient air intake in the throttle body; 2. Problems with the carbon canister or its solenoid valve, causing an overly rich air-fuel mixture; 3. Excessive carbon buildup inside the engine, leading to poor fuel atomization; 4. Leakage in the fuel injectors. If the strong gasoline smell disappears after the engine warms up, it is generally a normal phenomenon. This is because the combustion efficiency is poor when the car first starts. During a cold start, the water temperature and exhaust pipe temperature are low, resulting in a richer air-fuel mixture. Consequently, some of the mixture does not burn completely and is expelled through the exhaust pipe, which causes the noticeable gasoline smell.
11
4
Share

What Causes the Speedometer to Fluctuate While Driving?

Reasons for speedometer fluctuations while driving: 1. Faulty charging circuit: If the battery cannot charge or is undercharged, the engine ECU will increase the engine speed to allow the alternator to charge the battery, causing the speedometer to fluctuate; 2. Faulty throttle: A malfunctioning throttle will alter the engine's air intake, leading to speedometer fluctuations; 3. PCV valve or carbon canister solenoid valve failure: When these valves malfunction, the fuel entering the combustion chamber will deviate from the ECU's settings, resulting in speedometer fluctuations; 4. Engine carbon buildup: Carbon deposits on the throttle can affect engine air intake, while combustion chamber carbon buildup can impact fuel injection and ignition, potentially causing pre-ignition or detonation, which makes the engine speed unstable.
14
1
Share

How to Change the Transmission Oil for Magotan?

Method for changing the transmission oil of Magotan: 1. First, add the transmission cleaner into the transmission to allow the cleaner to decompose the oil film on the gears as much as possible; 2. Lift the car and switch between D and R gears, running for 5 to 10 minutes; 3. Drain the old oil, but long-term use results in the impossibility of cleaning the transmission thoroughly in just one round, so this cleaning process needs to be repeated twice; 4. After complete drainage, add new oil. The body dimensions of the Magotan are 4865 mm in length, 1832 mm in width, and 1471 mm in height, with a wheelbase of 2871 mm. The Magotan features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension, adopting a unibody structure.
16
1
Share

What is a Temporary License Plate?

Temporary license plates refer to provisional vehicle travel permits issued by the public security vehicle management department for cars that have not yet completed all registration formalities. The Road Traffic Safety Law clearly stipulates that vehicles must display license plates as required when driving on roads, and failure to do so will result in penalties. However, before obtaining the official license plates, it is mandatory to apply for temporary motor vehicle license plates in accordance with regulations to legally drive on roads. Two temporary license plates should be affixed simultaneously: one on the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, and the other on the lower left corner of the rear windshield inside the vehicle. For other types of vehicles where installation conditions are limited, only one temporary license plate is required, which should be affixed on the lower left or right corner of the front windshield inside the vehicle, ensuring it does not obstruct the driver's view, to guarantee driving safety.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.