Press 1 or 2 to Get a Card on the Highway?

1 Answers
OCecilia
07/25/25 12:08pm
When getting a card on the highway, you need to choose based on your vehicle type. 1 represents sedans and small passenger vehicles with 7 seats or fewer, and small trucks weighing 2 tons or less. 2 represents passenger vehicles with 8 to 19 seats and trucks weighing more than 2 tons up to 5 tons (inclusive). Below are the precautions for getting a card on the highway: Drive on the left: The card machine or manual toll booth will be on the left side of the vehicle, so drive on the left in advance and estimate the distance between the left corner of your car and the card machine or toll booth. Slow down: After adjusting the left and right distance, straighten the direction and proceed slowly without swaying left and right. Press the button to get the card: When the card machine or toll exit is directly opposite your left shoulder, stop, shift into neutral, or pull the handbrake. Press the corresponding button based on your vehicle type, then take the card.
Was this review help?
7
3
Share
More Forum Discussions

What is T-Box in Vehicle Networking?

T-Box in vehicle networking refers to the onboard T-Box in the vehicle networking system. The introduction and functions of the vehicle networking system are as follows: Introduction to the Vehicle Networking System: The vehicle networking system consists of four parts: the main unit, onboard T-Box, mobile app, and backend system. The main unit is primarily used for audio-visual entertainment and vehicle information display; the onboard T-Box is mainly used for communication with the backend system/mobile app, enabling the mobile app to display and control vehicle information. Functions of the Vehicle Networking System: This feature can help users remotely start the vehicle, turn on the air conditioning, and adjust the seat position to a suitable setting.
8
4
Share

How Many Liters of Engine Oil Should Be Added to a Jetta?

Jetta cars generally require about 4 liters of engine oil. The exact amount may vary slightly depending on the level of emissions. Typically, a 4-liter can is sufficient. Introduction to engine oil: 1. Gasoline appears as a transparent liquid, primarily composed of various hydrocarbons ranging from C4 to C10, and is classified into three grades based on octane number: 90, 93, and 97. 2. Gasoline has a high octane number and excellent anti-knock properties, making it suitable for high-compression ratio carburetor-type gasoline engines. It can enhance engine power and reduce fuel consumption. 3. Gasoline has good stability, is less prone to oxidative deterioration during storage, transportation, and use, and is non-corrosive to engine components and oil storage containers.
3
4
Share

What does reverse ECU mean?

Reverse ECU refers to the vehicle's onboard computer. Below is relevant information about reverse ECU: 1. Concept: The ECU serves as the brain of a car. Functionally speaking, it is a dedicated automotive microcomputer controller. Like a regular computer, it consists of a microprocessor (CPU), memory (ROM, RAM), input/output interfaces (I/O), analog-to-digital converters (A/D), as well as shaping circuits, drivers, and other large-scale integrated circuits. 2. Function: The electronic control unit's function is to perform calculations, processing, and judgments on the information input from sensors such as the air flow meter based on its stored programs and data, then output commands to provide the fuel injector with electrical pulse signals of specific widths to control fuel injection quantity. The electronic control unit consists of a microcomputer, input/output circuits, and control circuits.
15
2
Share

What is the tutorial for replacing the battery in a Tiida car key?

Tiida car key battery replacement tutorial: 1. Locate a small switch on the back of the car key and flip it. 2. Pull out the top part by gripping it firmly. 3. After removing the mechanical key, you will see a small groove. 4. Use a flathead screwdriver to pry open the car key cover along the groove. Once a gap appears, manually open it. 5. With the key cover open, remove the old battery and replace it with a new one (pay attention to the polarity). 6. Reattach the key cover and insert the mechanical key back in. How the remote key works: First, the key emits a weak radio wave, which is received by the car antenna. The electronic control unit then identifies the signal code, and the system's actuator (motor or electromagnetic coil) performs the lock/unlock action.
5
1
Share

Can idling the engine charge the battery?

Idling the engine can charge the battery. The method for charging the battery is: 1. Turn off the engine and remove the battery; 2. Open the vent caps on the battery; 3. Attach the red clamp of the dedicated charger to the battery's positive terminal marked with a plus sign, and the black clamp to the negative terminal marked with a minus sign; 4. Adjust to the 2nd gear and select the 12-volt power source; 5. Plug in the charger, turn on the switch, and charging will begin. Precautions for battery charging include: 1. In cold weather, check if the electrolyte is frozen before charging; 2. Check the electrolyte level before charging; 3. During charging, measure the density and voltage of the electrolyte approximately every hour, and monitor its temperature; 4. Ensure the charging area is well-ventilated and strictly prohibit open flames; 5. Stop charging if unattended.
20
3
Share

What are the reasons why the trunk of the Chevrolet Cruze cannot be opened?

The reasons why the trunk of the Chevrolet Cruze cannot be opened are: 1. The latch of the trunk lid is damaged; 2. The switch of the trunk lid is damaged. The Chevrolet Cruze is a compact car with a body size of 4666mm in length, 1807mm in width, and 1460mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 52 liters. The Chevrolet Cruze is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum power speed of 5600 rpm. It is paired with a 7-speed dual-clutch transmission. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a rear torsion beam plus Watt's linkage non-independent suspension.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.