Preparations and Operations Before Starting

[LeEverly]

First, adjust the seat's front and rear position according to your body height and weight. The free travel of the clutch pedal is 1525mm. The free travel of the brake is 1020mm, both of which have been adjusted to standard before leaving the factory.

[ZacharyFitz]

Every time before starting to drive, I first adjust the seat to the most comfortable position, ensuring my line of sight is straight ahead. I adjust the rearview mirror to clearly see behind and fasten the seatbelt—that thing really saves lives in critical moments. Then I glance at the dashboard to check if any warning lights are on. Don’t forget to look around, especially in blind spots, checking for pedestrians or obstacles nearby. Rolling down the window to listen for sounds adds extra safety. When starting the engine, I gently press the brake first, then turn the key and wait a few seconds for it to run smoothly. If it’s a cold winter morning, I let the engine warm up for half a minute to avoid freezing damage. If the car has been parked for a long time, I also check that the tire pressure isn’t too low. Making these small actions a habit doubles driving safety and saves unexpected trouble.

[McAlan]

For beginners, it's crucial to prepare thoroughly before starting. Before sitting in the driver's seat, I always adjust the mirror angles to ensure there are no blind spots on either side. Fasten the seatbelt securely, not loosely. Check if the dashboard lights are functioning normally—don't ignore warnings like low fuel or engine alerts. Most importantly, observe your surroundings: glance back to check behind you and use your foot to confirm there are no obstacles on the ground. Don’t rush to shift gears when starting; let the engine idle for a few seconds first. If it's raining or the road is slippery, take extra time with these steps to prevent skidding or losing control. Developing this routine significantly reduces the chance of accidents.

[VanIker]

When commuting by car, I keep the pre-start routine simple. Just sit in the seat, adjust the rearview mirror clearly, and click the seatbelt into place. Take a quick glance at the dashboard to check for any warning lights. Before starting the car, look over your shoulder to ensure the blind spot is clear, then gently turn the key while pressing the brake pedal. These steps take just two to three minutes - no need for extra hassle during daily commutes.

[JamesonAnn]

When driving with family on board, I take extra care during startup. First, securely fasten the children's seatbelts or ensure they're properly seated in child seats, preventing any movement. Adjust the rearview mirrors to cover all necessary angles front and back, and fasten my own seatbelt without any gaps. Check the dashboard to ensure no warning lights are illuminated. Conduct a full visual sweep of the surroundings and verbally confirm "Everyone ready?" to ensure all passengers are safe. Start the engine and wait for it to run smoothly before releasing the handbrake. In low visibility conditions like rain or nighttime, use additional lighting for safety. These small details safeguard our family's happiness on the road.

[LeGeorge]

After years of car enthusiasm, I've developed a habit of checking mechanical conditions before starting. Once seated, I first inspect the dashboard for normal oil pressure and battery lights. Adjust the rearview mirror to the right angle for clear rear visibility. Fasten the seatbelt to ensure personal stability. Before ignition, scan around the car to clear any debris. When starting, gently press the brake without revving the throttle, letting the engine warm up gradually. If the car has been idle for long, I quickly squeeze the tires to check air pressure. This routine is simple yet effective in preventing malfunctions.