···
Log in / Register

Precautions for Using Car Wipers

4 Answers
Karter
09/04/25 8:09am

Precautions for using car wipers: 1. Heavy rain: When the rain is heavy, it is necessary to increase the wiper frequency in time. 2. Light rain: If it's just light rain, don't rush to turn on the wipers immediately, as the windshield doesn't have enough moisture at this time. Dry wiping will only smear the dirt, damage the wiper blades, and scratch the windshield. 3. Windshield washer fluid: Remember to spray windshield washer fluid first when turning on the wipers for the first time, and then activate the wipers. The wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its main function is to clear rain, snow, and dust on the windshield that obstruct the view.

Was this review help?
6
3
Share
ColemanLee
09/17/25 2:12am

I have an old friend who's been driving for over a decade, and he always reminds me not to take windshield wipers lightly. Before turning on the wipers when it rains, first spray some windshield washer fluid to wet the glass, then activate the wipers. Dry wiping can easily scratch the windshield and damage the wiper blades. During hot weather when parking for long periods, I lift the wipers to prevent the rubber from sticking, aging, or falling off. In winter when covered with ice and snow, manually remove ice chips and snow chunks before turning on the wipers, otherwise the motor may overload and burn out. Adjust wiper speed according to rainfall intensity: use intermittent mode for light rain, low speed for moderate rain, and high speed only for heavy downpours—avoid constant rapid wiping to save battery. Remember to inspect wiper blades quarterly for cracks or wear, and replace them every six months—it's low-cost but ensures clear visibility. Also, top up with dedicated wiper fluid promptly when low; avoid using plain water to prevent scaling and nozzle clogging. These small details make wipers durable and safe.

Was this review help?
16
1
Share
Expand All
DelJordan
10/31/25 2:41am

I just got my driver's license, and my instructor taught me to be patient with the wipers. The first step when driving in the rain is to test the windshield washer fluid to ensure smooth spraying and clear visibility—never dry-wipe to avoid damaging the car's surface. For light rain, use the slowest wiper setting with intermittent wiping to save power and protect the parts. In heavy rain, switch to a faster setting to avoid poor visibility and potential accidents. Every time you wash the car, clean the windshield of dust and insect residue to reduce friction and extend the wiper blade's lifespan. Check the rubber monthly for cracks or wear—replace it early for peace of mind. Beginners often forget to top up the wiper fluid, so I keep a bottle in the car for emergencies—it’s handy on rainy days. When parking in the garage, keep it away from direct sunlight to prevent heat damage and maintain effectiveness. Learning these tips makes driving much smoother.

Was this review help?
2
0
Share
Expand All
VonAngelo
12/14/25 2:49am

When driving a company car, focusing on wiper maintenance saves effort and delivers good results. Daily checks ensure the glass is clean and free of debris, reducing unnecessary friction and wear. Replace wiper blades every six months—they’re inexpensive but boost reliability. Don’t wait until they streak before acting. Use dedicated antifreeze wiper fluid, topping it up once in spring and autumn to keep the fluid lines clear and unclogged. In winter, preheat the car before starting the wipers to avoid cold-weather hardening and malfunctions. If storing the car long-term, move the wipers weekly to prevent sticking and extend their lifespan to three or four years effortlessly. In short: keep the glass smooth, the wiper blades in good condition, and the fluid reservoir full—these small habits ensure driving safety and avoid costly repairs.

Was this review help?
16
2
Share
Expand All
More Forum Discussions

What are the precautions for safe driving in rainy days?

Precautions for safe driving in rainy days are as follows: Pay attention to speed: When driving in rainy days, the speed must be slowed down because the road is slippery, especially when turning, excessive speed can easily cause skidding. The wet and slippery road surface in rainy days will extend the braking distance, so it is necessary to decelerate in advance to give yourself enough reaction time and space to ensure safety. Pay attention to distance: Do not keep too close to the car in front, as the slippery road can easily lead to rear-end collisions. Do not follow large vehicles too closely. First, it will block your view. Second, large vehicles may not be able to pass through water sections that they can normally pass. Moreover, large vehicles are prone to splashing water waves, causing inconvenience. Pay attention to visibility: Ensure clear visibility by cleaning rainwater and fog from the windows, and be mindful of pedestrians when crossing the road. In rainy days, the outside temperature is low, and the moisture inside the car condenses into fog on the windshield, obstructing the view. In this case, it is necessary to turn on the air conditioning to defog. Drivers should slow down, yield patiently, and choose a safe place to stop if necessary, avoiding competing with pedestrians and non-motorized vehicles.
19
0
Share

How to Open the Front Hood of the VV6?

vv6 front hood opening method: 1. Pull the handle located under the dashboard on the driver's side, and the hood will pop open slightly; 2. Reach into the gap, push the handle in the direction of the arrow and lift the hood, which will automatically rise to the open position. The VV6 is the fourth mass-produced model developed by the WEY brand, with dimensions of 4625 mm in length, 1860 mm in width, and 1720 mm in height, and a wheelbase of 2680 mm. In terms of appearance, the VV6 features a black panther-inspired front design, equipped with full-LED integrated headlights and highly ceremonial flowing welcome lights.
16
0
Share

What are the reasons for the non-rotation of the Toyota Prado air conditioning fan?

Toyota Prado air conditioning fan not rotating may be due to a faulty fan motor or capacitor; it could be a malfunction in the motor's coil; there might be poor contact in the main control switch; the screws between the motor and the fan blade may have loosened; or the compressor might be damaged. Any of these reasons can cause the fan to stop rotating. 1. Safety of air conditioning installation: Before installation, check if the wall is sturdy. If the wall is not sturdy and has issues like peeling, there is a risk of the air conditioner falling after installation, which not only damages the unit but also poses significant safety hazards. 2. Air conditioning installation position should not be too low: During installation, the position should not be too low. If installed too low, when the cooling function is activated, the cold air will flow downward, making it difficult to achieve ideal cooling for the entire room, which also consumes more electricity. Generally, the air conditioner should be installed at the upper part of the wall to ensure even cooling or heating throughout the room. 3. Correct wiring of the air conditioner: During wiring, connections should be made strictly according to requirements. Incorrect or reversed wiring can lead to short circuits, electric shocks, and other accidents. If the wiring is altered, it can increase the load on the circuit, even leading to fire accidents.
16
1
Share

Where is the car VIN code located?

The car VIN code can be seen under the front windshield on the driver's side. The VIN code consists of 17 characters, hence commonly known as the seventeen-digit code. It contains information such as the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. The VIN code consists of 17 characters, hence commonly known as the seventeen-digit code. It contains information such as the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. Positions 1 to 3 of the VIN code: manufacturer, brand, and type; Position 2: vehicle manufacturer code; Position 3: vehicle type code; Positions 4 to 8: vehicle characteristics; Position 9: check digit; Position 10: model year; Position 11: assembly plant; Positions 12 to 17: serial number.
3
5
Share

Is Haval Fuel-Consuming?

Haval's fuel consumption ranges from 7.4L to 8.7L per 100 kilometers, which does not fall into the category of being highly fuel-consuming. Relevant information about Haval is as follows: 1. Introduction: Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, primarily focusing on SUV models, operates in parallel with the Great Wall brand, utilizing independent logos, product development, production, and service systems. 2. Haval H Series Products: Haval H2s, Haval H2, Haval H4, Haval H5, Haval H6, Haval H6 Coupe, Haval H7, Haval H9.
19
3
Share

What is the strength of the front anti-collision beam of the Qin Plus DM-i?

The strength of the front anti-collision steel beam of the Qin Plus DM-i is 1180DP. Here is more information about the Qin Plus: 1. Power: The Qin PLUS 2021 DM-i 55KM Premium model is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 110Ps, maximum power of 81kW, maximum torque of 135N·m, paired with an E-CVT continuously variable transmission, and also equipped with an electric motor with a maximum horsepower of 179Ps and maximum power of 132kW. 2. Body dimensions: The Qin PLUS 2021 DM-i 55KM Premium model has a body length of 4765(mm), width of 1837(mm), height of 1495(mm), and a wheelbase of 2718(mm). As a compact car, the body dimensions of this model are moderate.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.