PCX: Choosing Wuyang or Sundiro?

What is an Engine Control Module (ECM) Fault?

An ECM fault indicates there is an issue with the powertrain control module or the engine itself. The causes of engine faults are as follows: Irregular Maintenance: People often invest heavily in vehicle modifications but tend to neglect scheduled engine maintenance. According to professional automotive repair specialists, approximately 50% of vehicle faults are caused by poor engine maintenance. "This clearly demonstrates that proper engine maintenance plays a crucial role in extending a vehicle's service life. Deteriorated Engine Oil: The quality of lubricating oils changes during use across different grades. After a certain mileage, the oil's performance deteriorates, which may lead to various engine problems. To prevent such faults, it's essential to change the engine oil regularly according to usage conditions and maintain proper oil levels (typically between the upper and lower marks on the dipstick). When oil passes through the fine pores of the oil filter, it traps solid particles and sludge in the filter. If the filter becomes clogged and oil cannot flow smoothly, it may rupture the filter element or activate the relief valve, allowing unfiltered oil to bypass through the bypass valve and carry contaminants back to lubrication points. This accelerates engine wear and increases internal contamination. Therefore, regular replacement of the oil filter is equally important.

7

1

Share

Where is the Toyota EGR valve located?

EGR valve is installed on the right side of the intake manifold, near the car's throttle position. Below are the functions and classifications of the automotive EGR valve: Functions of the automotive EGR valve: The function of the automotive EGR valve is to control the amount of exhaust gas entering the intake manifold, allowing a certain amount of exhaust gas to flow into the intake manifold for recirculation. The EGR valve is a very important and critical component in the exhaust gas recirculation system. The EGR valve (Exhaust Gas Recirculation valve) is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculated back to the intake system. Classifications of EGR valves: EGR valves are divided into mechanical and electronic control types. The EGR valve reduces combustion chamber temperature by directing exhaust gas from engine combustion into the intake manifold to participate in combustion, improving engine efficiency, enhancing the combustion environment, reducing engine load, effectively decreasing NOx emissions, minimizing knocking, and extending the service life of various components.

9

5

Share

What is the minimum ground clearance of the Audi A4?

The minimum ground clearance of the Audi A4 is 107mm. The minimum ground clearance of the Audi A4 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance in the Audi A4 improves its off-road capability, but if the ground clearance is too high, it may reduce stability during high-speed driving. The Audi A4 (Audi A4) is a B-segment model manufactured by FAW-Volkswagen and launched in April 2003. The dimensions of the Audi A4L model are 4818mm in length, 1843mm in width, 1432mm in height, and 2908mm in wheelbase. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Audi A4 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Audi A4's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's intended use and the road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle is frequently used in rural areas or on poor road conditions, a higher ground clearance may be preferable to avoid scraping or damaging the undercarriage.

10

0

Share

What does EPB mean on a car?

EPB on a car stands for Electronic Parking Brake system. The Electronic Parking Brake system integrates the temporary braking function during driving with the long-term braking function after parking, and realizes parking braking through electronic control technology. The principle and function of the electronic parking brake are as follows: Principle of the electronic parking brake: The electronic parking brake is a technology that realizes parking braking through electronic control. The working principle of the electronic parking brake is the same as that of the mechanical parking brake, both achieving control of parking braking through the friction generated between the brake disc and the brake pads. The only difference is that the control method has changed from the previous mechanical parking brake lever to an electronic button. Function of the electronic parking brake: From the basic parking function of the electronic parking brake, it extends to the automatic parking function AUTOHOLD. The application of AUTOHOLD automatic parking technology allows the driver to avoid prolonged braking when the vehicle stops. With the automatic electronic parking brake activated, unnecessary sliding of the vehicle can be avoided. In simple terms, the vehicle will not roll away.

4

1

Share

What do the letters P, R, N, D on an automatic transmission mean?

P stands for Park, R for Reverse, N for Neutral, and D for Drive. Here are the detailed explanations: P (Park): P is the Park gear, usually the first position. It is used when parking the car for an extended period. Once engaged, the car cannot move under external force unless mechanical tools are used. R (Reverse): R is the Reverse gear, which many drivers are familiar with. It is required for parking, reversing, and other situations where the car needs to move backward. N (Neutral): N is the Neutral gear, which should generally be avoided. Many drivers mistakenly shift to Neutral at traffic lights, which is incorrect as the car may roll. Additionally, coasting in Neutral while driving is dangerous and severely impacts traffic safety. D (Drive): D is the Drive gear, the most commonly used position. To move forward, the car must be in D. Unlike manual transmissions, automatic transmissions do not require frequent gear changes; speed can be controlled solely with the brake pedal.

15

3

Share

What are the causes of high automatic transmission temperature?

Automatic transmission temperature can become high due to the following reasons: 1. Clogged pump suction filter screen; 2. Poor radiator cooling capacity; 3. Severe machine overload operation; 4. Severe wear or damage to the transmission hydraulic pump; 5. Serious system leakage, improper operation of the torque converter inlet proportional valve; 6. High clutch slippage in the transmission. An automatic transmission is a gear-shifting device that can automatically change gears based on vehicle speed and engine RPM, as opposed to a manual transmission. Common types of automotive automatic transmissions include hydraulic automatic transmissions (AT), continuously variable transmissions (CVT), automated manual transmissions (AMT), and dual-clutch transmissions.

9

1

Share

PCX: Choosing Wuyang or Sundiro?

What is an Engine Control Module (ECM) Fault?

Where is the Toyota EGR valve located?

What is the minimum ground clearance of the Audi A4?

What does EPB mean on a car?

What do the letters P, R, N, D on an automatic transmission mean?

What are the causes of high automatic transmission temperature?

Do Sedans Need Water Added?

How to Activate the Lift Mode on Volkswagen Touareg?

Why does the ABS light come on after vehicle inspection?

What does it mean when the blue water temperature gauge lights up?