Operation Method of Fast 8-Speed Transmission?

1 Answers
KeiraRose
07/29/25 5:14pm
Fast 8-speed transmission is a light-duty transmission, and coasting in neutral is strictly prohibited during use. The following is a detailed introduction to the Fast 8-speed transmission: 1. Advantages: Lower fuel consumption. Due to the increased number of gears, the gear ratio of the transmission is denser, allowing the vehicle to drive in a more reasonable gear, reducing engine speed, and thereby decreasing fuel consumption. Faster acceleration. 2. Models: BMW 5 Series Gran Turismo, BMW New 5 Series (2010 model), Lexus LS460L, Lexus GS460, IS-F, Rolls-Royce Ghost, Audi New A8.
Was this review help?
15
4
Share
More Forum Discussions

Why don't repair shops replace the triangular arm bushings?

Triangular arm bushings are not replaced by repair shops because the replacement process is relatively troublesome, and the cost of replacement is not high, so many repair shops are reluctant to replace them. The introduction of triangular arm bushings is as follows: Introduction to Triangular Arm Bushings: The triangular arm refers to the swing arm, whose function is to provide balance and support. When a car drives on uneven roads, the tires will move up and down, which is accomplished by the swing of the triangular arm. The tires are mounted on the axle hub, which is connected to the triangular arm via a ball joint. Working Principle of Triangular Arm Bushings: The triangular arm is essentially a universal joint, allowing connected movement even when the relative positions of the driving and driven sides change. For example, during steering, the shock absorber is compressed, causing the A-arm to tilt upward. Repair and Maintenance of Triangular Arm Bushings: When the triangular arm becomes deformed, the ball joint is damaged, or the bushing ages, repairs are necessary.
13
4
Share

What is the range of the Lavida Pure Electric?

The range of the pure electric Lavida is 278 kilometers. Here are some details about the pure electric Lavida: 1. The range of the pure electric Lavida is very accurate, as it uses the CMCE high-precision battery energy control system, which can monitor the voltage of each battery module. 2. This vehicle uses a ternary lithium battery. The fast charging time for the Lavida Pure Electric is 0.66 hours, and the slow charging time is 5.5 hours. The top speed of the Lavida Pure Electric is 150 km/h. 3. Pure electric vehicles do not have an engine, so the air conditioning in such vehicles operates entirely on electricity.
2
4
Share

What transmission does the Sylphy Classic use?

The manufacturer of the Sylphy Classic's transmission is Jatco. Jatco is the world's third-largest design and production group for automatic transmissions, with Nissan being its representative brand. Initially, Jatco was just a division producing transmissions for Nissan before becoming an independent company. The Sylphy Classic manual version is equipped with a manual transmission, while the automatic version features a CVT (Continuously Variable Transmission). A CVT does not have specific gears; it operates similarly to an automatic transmission but differs in that the gear ratio changes continuously rather than in steps, ensuring smooth and uninterrupted power delivery. When using the Sylphy Classic's transmission daily, pay attention to the following points: Do not delay changing the transmission oil for extended periods. Prolonged intervals between oil changes can damage internal components like bearings and the housing. Avoid coasting in neutral for long durations. While manual transmission drivers often coast in neutral to save fuel, doing so in an automatic transmission can cause overheating and jerking when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers shift prematurely to demonstrate 'smooth' driving, but this can severely damage the transmission gears, leading to grinding or other failures over time. Avoid frequently climbing steep slopes in Drive (D). Automatic transmissions may overheat under heavy load or upshift too early, reducing climbing power. Use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If the automatic transmission vehicle breaks down, use a flatbed tow truck with the transmission in Neutral (N). Avoid using tow ropes or dragging the vehicle directly, as this can damage the transmission.
16
0
Share

How to Start a Car When the Key Fob Battery Dies?

When the key fob battery is dead, there are four methods to start the car: 1. Key fob slot: Locate the slot and insert the key fob into it. Wait a few minutes for the vehicle to detect the key, then start the car. 2. Hidden mechanical keyhole: Find the concealed mechanical keyhole behind the push-button start, insert the key blade, and start the car as you would with a traditional vehicle. 3. Place the key fob against the start button: After the key fob battery dies, press the key fob against the push-button start and wait momentarily to start the car normally. 4. Replace the battery: Simply replace the dead battery, though this method isn't suitable for emergencies.
7
5
Share

How to Deal with a Nail Puncture in the Tire?

If a tire is punctured by a nail, follow these steps: 1. If you notice the puncture while driving, first find a safe place to pull over. Place a triangular warning sign 50 meters in the direction of oncoming traffic. If on a highway, stop in the emergency lane and place the warning sign 150 meters away. 2. If the nail is not fully embedded and you have a spare tire, you can remove the nail. After removal, pour some water over the punctured area to check for air leaks. If there is no leak, no further action is needed. If there is a leak, replace the spare tire. 3. If the nail is fully embedded, check the tire pressure. If the pressure remains unchanged, you can drive to a 4S shop or repair shop for inspection. Monitor the tire pressure during the drive. 4. If there is severe air leakage and no spare tire is available, contact a repair shop for assistance. Avoid driving directly to the repair shop to prevent damage to the tire or wheel rim.
5
5
Share

What is the battery model number for the Ford Focus?

The battery model for the Focus is 12V 60Ah. Generally, the battery specifications are labeled on its surface, so you can check there. When purchasing a battery, it is recommended to choose a well-known brand, as they are more reliable in terms of both quality and after-sales service. Here is some additional information: 1. Preventing battery drain: After turning off the car, make sure to turn off all electrical appliances in the vehicle. Otherwise, it can easily lead to battery drain. If the car is not going to be used for an extended period, it is advisable to disconnect the negative terminal of the car battery to prevent drainage. 2. Introduction to the Ford Focus: It is available in two body styles: hatchback and sedan. All models meet the China VI-B emission standards. In terms of suspension, the front suspension is a MacPherson strut independent suspension for all models. The rear suspension comes in two types: the 1.5L models feature a torsion beam non-independent suspension, while the 1.5T models are equipped with a multi-link independent suspension.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.