New Energy Vehicle License Plate Registration Process?

1 Answers
DeElias
07/29/25 3:24pm
The license plate registration process for new energy vehicles is as follows: 1. Bring the required documents: original and photocopy of ID card, non-local residents also need to submit the original and photocopy of the local "Residence Permit"; proof of origin for the non-motor vehicle (purchase invoice); electric vehicle sales (warranty) registration form (third copy); non-motor vehicle factory certificate; other certificates and documents required by the traffic management department of the public security authority. If the electric bicycle registration is handled by an agent, the agent's original ID and photocopy must also be submitted. 2. Fill out the form: The owner or agent should obtain the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and under the guidance of the staff, fill in the detailed information as required and verify the certificate. 3. Vehicle inspection by the officer: Compare the brand model, frame number, motor number, and color of the electric bicycle with the certificate and proof of origin, and perform vehicle inspection including number tracing and weighing. 4. License plate issuance: If the inspection is passed, the officer will stamp and sign the number tracing section on the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and the license plate can then be issued.
Was this review help?
10
1
Share
More Forum Discussions

What is the function of an ignition coil?

The function of an ignition coil is to convert the 12V low-voltage electricity from the power source into 15–20kV high-voltage electricity. This high-voltage electricity is then transformed into a high-voltage spark by the spark plug, igniting the combustible air-fuel mixture. The working principle of an ignition coil: 1. The reason an ignition coil can convert the low-voltage electricity from the vehicle into high voltage is due to its similar structure to a conventional transformer, with a large turns ratio between the primary coil and the secondary coil. 2. However, the operation of an ignition coil differs from that of a conventional transformer. While a conventional transformer can operate continuously, an ignition coil works intermittently, repeatedly storing and releasing energy at varying frequencies depending on the engine's speed. 3. When the primary coil is connected to the power source, a strong magnetic field is generated around it as the current increases, and the iron core stores this magnetic energy. When the switching device disconnects the primary coil circuit, the magnetic field of the primary coil rapidly decays, inducing a very high voltage in the secondary coil. 4. The faster the magnetic field of the primary coil disappears, the greater the current at the moment of disconnection, and the larger the turns ratio between the two coils, the higher the voltage induced in the secondary coil.
9
2
Share

How Long After Obtaining a C1 License Can You Apply for a B2 Upgrade?

You can apply for a B2 upgrade one year after obtaining a C1 license. However, the following conditions must be met: 1. Age between 20 and 50 years old; 2. Application must be submitted in the place of household registration; 3. No record of accumulating 12 penalty points in the current scoring cycle and the most recent scoring cycle before application. Additional information: To apply for an upgrade to medium-sized bus, tractor, or large bus driving license categories, the following regulations must also be met: 1. To apply for an upgrade to a medium-sized bus driving license category, you must have held a city bus, large truck, small car, small automatic transmission car, low-speed truck, or three-wheeled car driving license for more than three years, with no record of accumulating 12 penalty points in the most recent three consecutive scoring cycles before application; 2. To apply for an upgrade to a tractor driving license category, you must have held a medium-sized bus or large truck driving license for more than three years, or a large bus driving license for more than one year, with no record of accumulating 12 penalty points in the most recent three consecutive scoring cycles before application; 3. To apply for an upgrade to a large bus driving license category, you must have held a medium-sized bus or large truck driving license for more than five years, or a tractor driving license for more than two years, with no record of accumulating 12 penalty points in the most recent five consecutive scoring cycles before application.
1
1
Share

What sound does engine cylinder scoring make?

It may be accompanied by a rattling sound, but cylinder scoring can only be determined by certain symptoms and not solely by engine noise. Methods to determine whether an engine has cylinder scoring: 1. Depending on the severity, cylinder scoring can be divided into three stages: initial, intermediate, and advanced. 2. In the initial stage, the engine noise is not very distinct. The main symptom is smoke escaping from the oil filler port and crankcase ventilation pipe when accelerating or intermittently increasing throttle. The solution is to remove the piston connecting rod assembly for inspection and cleaning, replace the engine oil and oil filter, and clean the oil pan. 2. In the intermediate stage, there will be abnormal noises similar to knocking. Symptoms include poor idle performance, and when the oil filler cap is opened, a large amount of smoke will rhythmically escape. The exhaust pipe emits thick blue smoke. The solution is to polish with an oilstone and replace with pistons of the same model and quality, as well as piston rings of the same specifications. 3. In the advanced stage, there will be more obvious knocking and blow-by sounds, along with a noticeable drop in power. The noise worsens with increased throttle, becomes chaotic, and the engine vibrates. In such cases, the cylinder liner, piston, and piston rings must be replaced as a complete set.
12
5
Share

What level of car does the Edge belong to?

Based on the body size of the Ford Edge, it belongs to the mid-size SUV category. Considering the official guide price of this car, ranging from 220,800 to 449,800 yuan, the Ford Edge is classified as a premium vehicle. Despite being a high-end car, its exterior design is very understated. More details about the Ford Edge are as follows: 1. The Edge is a crossover business and travel luxury vehicle launched by Ford, and it is also one of Ford's main models. In terms of appearance, the interior design of this car is very low-key, yet it exudes a domineering style. Its large exterior gives the car a very grand appearance. 2. The interior of the car is designed to be very comfortable, giving a warm and homely feeling once you sit inside. The Edge's interior uses more curves, making it softer and more comfortable, giving it an elegant and spacious feel. 3. In terms of power, the Ford Edge offers two models: the EcoBoost245 two-wheel-drive sports version and the EcoBoost245 four-wheel-drive sports version. The two-wheel-drive version is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission, while the four-wheel-drive version is equipped with a 2.7L V6 engine, also matched with an 8-speed automatic transmission.
10
0
Share

How to Replace the Metal Base of the Interior Rearview Mirror?

Here are the steps to replace the metal base of the interior rearview mirror: 1. For models without a rain sensor, turn it 90 degrees to the left to remove. To install, turn it 90 degrees to the right. The principle relies on the metal clip snapping onto the base above. 2. For models with a rain sensor, remove the plastic cover by prying it open from the middle, then push it down along the groove while wiggling it slightly to remove. Additional Information: The primary function of the interior rearview mirror is to observe rear-seat passengers, especially children. It can also be used for judging distances, assisting in turns, and observing rear vehicles during emergency braking.
20
4
Share

How to Calculate Fuel Consumption Correctly?

Fuel consumption per 100 kilometers = Volume of fuel consumed (liters) ÷ Distance traveled (kilometers) × 100. For example: If a car consumes A liters of fuel to travel N kilometers, then the fuel consumption per 100 kilometers = A ÷ N × 100. Of course, the fuel consumption per 100 kilometers is not fixed; factors such as different road conditions, load capacity, temperature, and whether the air conditioning is on all affect fuel consumption. Additional information: Constant-speed fuel consumption refers to the fuel consumption per 100 kilometers obtained by certain types of vehicles in constant-speed fuel consumption tests as stipulated by national standards. These types of vehicles include: 1. M1 category, M2 category with a maximum design total mass not exceeding 3.5 tons, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5 tons, tested according to the "Test Methods for Fuel Consumption of Passenger Cars." 2. M2 category, M3 category, N2 category, and N3 category compressed natural gas vehicles with a maximum design total mass exceeding 3.5 tons; M2 category, M3 category, and N category vehicles with a maximum total mass greater than or equal to 2 tons, tested according to the "Test Methods for Fuel Consumption of Commercial Vehicles."
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.