Must the Wedding Car Be Black?

Why does ETC fail to recognize abnormally?

Possible reasons for ETC recognition failure are as follows: 1. Excessive vehicle speed causing unsuccessful information reading. 2. Some vehicles' front windshields may shield microwave signals due to metal explosion-proof film, leading to ETC recognition failure. 3. Possible ETC device issues, such as dead battery or loose card, may prevent smooth recognition in ETC lanes. Extension: ETC, short for Electronic Toll Collection, is a toll collection method promoted by the state in recent years to improve highway traffic efficiency through electronic toll stations. ETC generally consists of several components: the device installed on the vehicle is called OBU, specifically used for card insertion. Then there's your bank card for fee deduction. Finally, there's the ETC scanning device installed at toll stations, specifically for scanning your ETC card.

12

2

Share

How to reset the tire pressure on a 2019 Volkswagen Lavida?

Volkswagen Lavida tire pressure reset method is as follows: 1. The Volkswagen Lavida has eliminated the physical tire pressure reset button and has set up the tire pressure reset function in the central control screen. 2. If the owner has replaced the central control screen, the tire pressure warning light cannot be cleared in the modified central control screen, and the original central control screen must be reinstalled to use the tire pressure reset function. Additional information is as follows: 1. Tire pressure actually refers to the air pressure inside the tire. High or low tire pressure has a huge impact on the performance and power of the car. Both excessive and insufficient tire pressure will shorten the tire's service life. 2. Currently, most tires are not filled with air. Therefore, the requirements for tire pressure are relatively strict for these tires. For tires filled with air, their pressure is related to the temperature changes throughout the year. Moreover, the level of tire pressure is also closely related to the car's performance, such as comfort and load capacity.

17

2

Share

What Causes the Bad Smell in Car Air Conditioning?

Car Air Conditioning Smell Causes: The unpleasant odor that often occurs when turning on the car air conditioning is mostly due to mold growth in the evaporator box and ventilation ducts. Air entering the car passes through the evaporator box to be cooled or heated before being blown out through the vents as warm or cool air. During this process, bacteria, dust, and even insect remains can accumulate in the evaporator box and ventilation ducts. Over time, this buildup leads to bad smells when the air conditioning is used. Solutions: 1. The best method is to choose an open, sunny area, open the car doors, turn on the natural air setting, set the external circulation to maximum (without turning on the air conditioning), or even better, use the heater setting. Let it run for 5-6 minutes to blow out the dust. 2. The air conditioning filter should generally be replaced once a year. However, if there are frequent sandstorms or other harsh weather conditions, replacing it every few months may be necessary. If the filter is only superficially dirty, it can be simply blown clean. However, if it is heavily soiled, cleaning is not recommended as it can enlarge the filter pores, significantly reducing its filtering effectiveness.

6

4

Share

Where is the child lock on the Accord door?

Honda Accord's child lock is located on the side of the rear door. The child lock can be activated without using a key—simply move the switch to the lock position to enable the child lock. Once the door is closed, rear passengers cannot open the door from the inside and must pull the door handle from the outside to open it. To deactivate the child lock, move the switch to the unlock position. Additional details are as follows: 1. The child lock is designed to prevent accidental door opening by children in the rear seat during driving, which could lead to falls and accidents. It is recommended that children be accompanied by an adult when traveling in the car. Rear-seated children should use a child safety seat, which not only prevents them from playing and causing disturbances but also provides better protection. 2. When the child lock is activated, especially if rear passengers fall asleep and the door is locked without waking them, occupants may become trapped inside in an emergency. In extreme cold or hot weather, this could lead to injury or illness, with more severe consequences for children. Therefore, the child safety lock should be turned off when not in use to avoid such situations.

1

Share

Where is the fuel tank switch of Skoda Octavia?

Skoda uses a magnetic fuel tank cap without a dedicated switch. The Skoda Octavia fuel tank cap can be opened by the following methods: 1. First, press the vehicle's one-button start button to turn off the engine; otherwise, the fuel tank cap cannot be opened. 2. Then, pull the vehicle's handbrake to prevent the car from rolling. The fuel tank cap cannot be opened without pulling the handbrake. 3. Observe the direction indicated by the arrow on the fuel tank indicator on the dashboard. The fuel tank cap is on the side where the arrow points. 4. Press the fuel tank cap on the outside of the vehicle to open it. Additional information: The car's fuel tank cap is divided into an inner cap and an outer cap. The outer cap is mostly an electronically controlled or cable-controlled door, and some fuel tank caps are opened with a key. The button for the electronic control or the lever for the cable control is usually located on the left or right side of the driver's seat, marked with a fuel pump icon. Pressing the button or pulling the lever will automatically open the fuel tank door. The inner cap can only be seen after opening the outer cap. The inner cap is made of rubber, turning it to the right tightens it, and turning it to the left opens it.

14

3

Share

Why Are Screws Always the Ones Puncturing Tires?

The threads of screws can easily embed into tires when run over. Common tire repair methods are as follows: 1. Traditional Plug Method (External Repair): This is a more primitive method. The principle involves using a sharp tool like an awl to enlarge the puncture hole, then inserting a rubber strip coated with adhesive into the hole. It's simple, very low-cost, and quick, requiring no separation of the tire from the rim or wheel balancing. The downside is obvious: enlarging the hole with an awl increases the damaged area, and this method isn't very durable, often leading to air leaks. (This method is not recommended) 2. Patch Repair (Internal Repair): This is the most common method, used by most tire repair shops. The tire is separated from the rim, the damaged area inside the tire is sanded to help the adhesive bond better, then the debris is cleaned off. Special tire repair adhesive is applied to the damaged area and its surroundings, a patch is pressed firmly onto the spot, and another layer of adhesive is applied to complete the repair. 3. Mushroom Plug Repair (Internal Repair): The mushroom plug is currently the most advanced tire repair method, also an internal repair. It requires separating the tire from the rim, and wheel balancing is necessary after repair. The difference between the mushroom plug and the patch method is that the mushroom plug can effectively fill the gaps in the puncture hole, preventing further damage to the affected area.

18

3

Share

Must the Wedding Car Be Black?

Why does ETC fail to recognize abnormally?

How to reset the tire pressure on a 2019 Volkswagen Lavida?

What Causes the Bad Smell in Car Air Conditioning?

Where is the child lock on the Accord door?

Where is the fuel tank switch of Skoda Octavia?

Why Are Screws Always the Ones Puncturing Tires?

What does daytime running light mean?

Is it a problem if the car chassis is hit?

What Type of RV Can a Class C License Drive?

Which brand does Infiniti belong to as a luxury car?