Must the Subject 1 Test Be Taken Locally?

1 Answers
RileyAnn
07/25/25 4:12pm
Subject 1 can be taken in a different location. The public security authorities have introduced 10 new measures for the reform of 'streamlining administration, delegating power, and improving government services' in traffic management, including 'cross-region handling' for 5 types of services such as driving tests and 'convenient and fast handling' for 5 services including vehicle mortgage registration. The cross-region handling is introduced as follows: The small car driver's license achieves 'national universal testing', and applicants can apply for a small car driver's license anywhere in the country with their resident ID card, without the need to submit proof of residence registration. The subject tests can be handled across regions. If an applicant who has passed some subject tests for a small car driver's license changes their place of residence to another location due to work, study, or life reasons, they can apply to change the test location and continue to take the remaining subject tests, reducing the burden of traveling back and forth for tests.
Was this review help?
11
2
Share
More Forum Discussions

How Many Days Does It Generally Take to Check Traffic Violations?

Traffic violations can generally be checked within 3 to 7 days, and no later than 13 working days. Below is relevant information about vehicle violations: Determination of vehicle violations: Within five days after traffic monitoring equipment collects records of illegal activities, the traffic management department of the public security organ at the place where the illegal act occurred shall review the recorded content. After verification, it will be entered into the road traffic violation information management system as evidence for penalizing the illegal act. Relevant laws and regulations on vehicle violations: Article 19 of the "Procedures for Handling Road Traffic Safety Violations": Within ten days from the date the traffic monitoring equipment collects records of illegal activities, the traffic management department of the public security organ at the place where the illegal act occurred shall review the recorded content. After verification, it will be entered into the road traffic violation information management system as evidence of the violation. The traffic management department of the public security organ shall strictly implement the review system for the content of illegal activities collected by traffic monitoring equipment and improve the review procedures.
16
3
Share

Purpose of the Crank Connecting Rod Mechanism?

The function of the crank connecting rod mechanism is to output power. Below is relevant information about the crank connecting rod mechanism: Principle of power output: It converts gas pressure into crankshaft torque, transforms the reciprocating motion of the piston into the rotational motion of the crankshaft, and changes the force acting on the piston crown into crankshaft torque to continuously output mechanical energy to working machinery. Components of the crank connecting rod mechanism: Engine block group: cylinder block, cylinder gasket, cylinder head, crankcase, cylinder liner, oil pan; Piston connecting rod group: piston, piston rings, piston pin, connecting rod; Crankshaft flywheel group: crankshaft, flywheel, torsional damper, balance shaft. The front end of the crankshaft in the crank connecting rod mechanism is used to drive auxiliary mechanisms such as the valve train, water pump, and fan. The front end shaft is equipped with a timing gear, belt pulleys for the fan and water pump, torsional dampers, etc.
12
5
Share

Differences Between SL and SN?

There are three main differences between SL and SN as follows: Difference in Wear Resistance Performance: The difference in oxidation resistance and wear resistance performance under high-temperature and high-speed operating conditions, such as the same TEOSTMHT high-temperature deposit test: The requirement for SN is no more than 35 milligrams; SN has higher high-temperature detergency than SL, making it especially suitable for turbocharged engines. SN-grade oil has higher oxidation stability and wear resistance. Since SN oil contains lower levels of phosphorus and zinc compared to SL oil, it reduces wear on the three-way catalytic converter. Different Environmental Standards for Engine Oil: In the quality classification, the further back the letter, the higher the environmental standard. Therefore, "SL" engine oil has a lower environmental standard than "SN". The highest environmental standard for engine oil is "SP". Classification by Quality Level: SG, SH, SJ, SL, SM, SN, so SN has a higher quality than SL. The number of SL-grade oils available for sale is fewer than SN.
17
4
Share

What causes the gurgling sound at idle in the 14th-generation Sylphy?

There are many reasons for the gurgling sound at idle in the 14th-generation Sylphy. Excessive engine carbon deposits: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the fuel injectors during startup can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture. Low ignition energy: When the internal engine temperature is insufficient, the fuel injectors spray more gasoline to meet power demands. The fuel requires higher ignition energy, and an increased spark plug gap can lead to reduced ignition energy, subsequently affecting performance. Abnormal coolant temperature: High engine coolant temperature can cause premature ignition timing, alter the air-fuel mixture ratio, and thin the engine oil viscosity (reducing lubrication). Causes of abnormal coolant temperature include insufficient coolant, a stuck thermostat, fan malfunction, or inaccurate temperature readings from the temperature control switch. Clogged fuel injectors: Clogged fuel injectors can result in inconsistent fuel spray quantities among the injectors, leading to uneven cylinder operation.
10
1
Share

Can I Change the Car Brake Fluid Myself?

You can change the car brake fluid yourself. Here is some relevant information about brake fluid: Method for changing brake fluid: First, park the car on a level surface to ensure the tires are fully in contact with the ground. Use a syringe to completely remove the old brake fluid from the reservoir until no fluid remains at the bottom, then pour in the new brake fluid. Use a jack to lift the car, locate the bleeder screw on the brake caliper, and remove the dust cap from the bleeder valve. Use a wrench to loosen the bleeder screw and connect a rubber tube between the bleeder valve and a drain bottle. Then, press the brake pedal while observing the color of the brake fluid in the rubber tube. If the color of the brake fluid is relatively light, you can stop pressing the brake pedal. Brake fluid replacement and precautions: Check the brake fluid level. If it is below the marked line, you need to add some brake fluid. If it is above the marked line, you can release some brake fluid appropriately. The brake fluid level should ideally be between the MIN and MAX marks. Regularly replacing the brake fluid ensures that the vehicle is not damaged and guarantees the safety of the driver and passengers in emergency situations.
8
2
Share

Is the Honda XR-V transmission using a steel belt or a chain?

Honda XR-V transmission uses a chain. Below are relevant details about the Honda XR-V: 1. Technology features: The XR-V is equipped with a 5-inch central control screen, but the car connectivity system is only available in higher-end models. 2. Interior design: The new model retains the interior design of the previous version, with only the top-tier VTi model adding a brown color option. 3. Interior configurations: The new model also undergoes minor adjustments. The EXi model adds one-touch start, smart key, and side air curtains, while the LXi adds fabric-leather hybrid seats and a folding key. The XR-V inherits the advantages of its big brother, the CR-V: extremely spacious interior. The photographed model is the 1.8 top-tier luxury panoramic sunroof version, featuring soft-touch materials throughout the cabin and cruise control. 4. Transmission: Available in two engine displacements: 1.5L and 1.8L, with two transmission options: manual and continuously variable transmission (CVT). The engine delivers a maximum power of 100.0kW, maximum horsepower of 136PS, and maximum torque of 169.0N·m. 5. Body dimensions: 4270*1772*1605mm.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.