Must the Scheduled Morning Session for Subject 3 Be Taken in the Morning?

3 Answers
KyleDella
09/01/25 7:12am
Subject 3 must be taken in the morning if scheduled for that time. After successfully booking Subject 3, the vehicle management office will send a text message notifying the examinee of the test time and location. The examinee must arrive at the test site on time as required to participate in the exam. If the examinee fails to attend the exam due to personal reasons, the test site will cancel the exam qualification, resulting in a failed attempt, and a rebooking for a make-up exam will be necessary. Below is additional information: 1. Subject 3: Subject 3 is part of the motor vehicle driver's license assessment, officially known as the Road Driving Skills and Safe & Civilized Driving Knowledge Test. 2. Notes: Since exam scheduling is automatically sorted by the system, there is no effective method to increase the success rate of booking. Alternatively, you may try the priority booking mode, which is only applicable when the applicant's driving learning certificate has less than 6 months of validity. Note that applicants must bring their identity documents to the scheduled test site and time. Failure to attend the exam on time will result in a failed attempt. If unable to attend the exam at the scheduled time, applicants must apply to cancel the booking at the vehicle management office one day in advance.
Was this review help?
12
3
Share
KeeganMarie
09/14/25 2:58am
When I heard someone ask whether the third subject (road test) must be taken in the morning if booked for that time, I thought it was quite common. Yes, if you scheduled a morning slot in the driving test system, it generally means you must attend the exam during that designated period. This is because test centers group candidates based on appointment schedules, and both the venue and examiners are prepared for that specific time. If you arrive late or miss it unexpectedly, it may be considered an absence, affecting your next booking opportunity. However, some locations now allow time changes via apps, but the rules are strict, requiring action several days in advance. In short, don’t casually reschedule your appointment to avoid wasted trips, lost time, and delays in your driving progress. It’s best to arrive early to familiarize yourself with the environment and prevent unexpected issues.
Was this review help?
16
1
Share
Expand All
LorenzoAnn
10/28/25 3:41am
A friend of mine took the driving test (Subject 3) last year. He booked a morning slot but assumed he could take it in the afternoon, only to be denied entry. Based on his experience, the test center strictly enforces scheduled exam times—if you book a morning slot, you must test in the morning, as the system doesn’t allow arbitrary adjustments. This policy aims to prevent chaos and ensure fairness. In practice, always check the exact requirements on your appointment slip or SMS notification—don’t make assumptions. If you genuinely have a conflict, apply for a reschedule through official channels in advance, though success rates are low. Weather conditions like heavy fog can also affect visibility during the test, so choosing an optimal time slot is crucial. Bottom line: don’t take risks—stick to your scheduled time for reliability.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What to do if the motor Hall sensor is broken?

Take out the multimeter and set it to the 20V range. Use the red probe to connect to the positive wire of the Hall sensor, and the black probe to connect to the yellow, green, and blue wires of the Hall sensor respectively. Turn on the power lock and slightly rotate the motor wheel. If the voltage changes, the corresponding Hall sensor is normal. Generally, the voltage change range is 0-5V. The motor and differential are usually separate. If it's a hex bolt, use a sharp awl to clean the dirt inside the hex cap for easier removal. Place the disassembled parts in order, and be careful to protect the internal magnets to avoid attracting debris and causing trouble.
6
1
Share

Why does the Volkswagen remote unlock require pressing twice?

This is a very thoughtful small feature in car design, with the main purpose of preventing unauthorized individuals from illegally entering the vehicle without the driver's permission, thereby protecting the driver's safety. Avoid using in humid environments: Please do not use or place the car key in humid or high-temperature environments, as this can easily damage the internal components of the key, accelerate the aging of the key's internal parts, and may also cause deformation of the outer shell. Avoid strong vibrations and drops: Avoid subjecting the car key to strong vibrations or dropping it from a height. When the car key is not in use for an extended period, please remove the battery.
2
3
Share

What is the fuel consumption of the Hummer H1?

Hummer H2 has a fuel consumption of 22L/100km. Engine carbon deposits: During long-term operation of the vehicle, carbon deposits and sludge will inevitably be generated during the combustion of gasoline. If these sludge and carbon deposits are not cleaned in time, it will lead to increased fuel consumption. Therefore, it is very important to clean the engine carbon deposits in time. Tips to reduce fuel consumption: Ensure the tire pressure is correct. The pressure should not be too high or too low, as both will increase fuel consumption. Check the tire pressure regularly to avoid affecting driving fuel consumption. It is not advisable to change the size of the tires. The wider the tire, the greater the resistance. Unless there are special requirements for good grip, overly wide tires will only increase fuel consumption.
11
4
Share

How to Start an Electric Car?

Sit on the seat, hold the handlebars with both hands, look straight ahead at the front of the car, keep both feet on the ground to stabilize the electric car, and align the handlebars straight. If the electric car is key-started, simply insert the key and turn it clockwise until the LCD dashboard lights up. If it's a push-button start, press the START button once. If there is a P gear, press it and release the handbrake. After starting, ensure it's in low gear, then slowly rotate the throttle with your right hand. The electric car will begin to move forward slowly, at which point you can place both feet on the footrests.
14
5
Share

What is the bulb model for Geely Emgrand headlights?

Geely Emgrand headlight bulb models are high beam H7 and low beam H1. Headlight maintenance methods: Regularly clean the lamp cover; Daily check if the lights are functioning properly; Inspect the sealing of headlights; Adjust the light projection direction; Clean the bulbs. Headlights are installed on both sides of the front of the car and are designed for illumination during night driving. Classification of car headlights: Halogen headlights: Many cars come with original halogen headlights, which are essentially incandescent lamps with strong penetration capability; Xenon headlights: Xenon headlights are filled with inert gases such as xenon and iodides into quartz glass tubes, then the inert gases are excited by high voltage to release electrons, allowing the two electrodes to emit light, with slightly higher brightness; LED headlights: LED lights mainly use LED light sources, which are electroluminescent devices using solid semiconductor chips as the light-emitting material.
15
2
Share

Does the Geely Boyue Pro come with a built-in dash cam?

Geely Boyue Pro does not come with a built-in dash cam, nor does it have an official manufacturer-installed dash cam. Therefore, even if a dash cam is included, it is a promotional gift provided by the dealership (4S store). Components of a dash cam: Main unit: Includes a microprocessor, data storage, real-time clock, display, operation keys, printer, data communication interface, and other devices. If the main unit does not include a display or printer, it should have corresponding data display and print output interfaces; speed sensor; data analysis software. Introduction to dash cams: A vehicle dash cam, commonly known as a car black box, is a digital electronic recording device that records and stores information such as vehicle speed, time, mileage, and other driving status data, and can output data through an interface. It records video while driving, simultaneously capturing time, speed, and location information in the footage, functioning much like a "black box."
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.